sdcc-3.9.0 fork implementing GNU assembler syntax

This fork aims to provide better support for stm8-binutils

1 files changed, 78 insertions, 0 deletions

diff --git a/sim/ucsim/stm8.src/test/s2.c b/sim/ucsim/stm8.src/test/s2.c
new file mode 100644
index 0000000..f83a877
--- /dev/null
+++ b/sim/ucsim/stm8.src/test/s2.c
@@ -0,0 +1,78 @@
+#include <stdint.h>
+#include <stdio.h>
+#include <ctype.h>
+
+#define DEVICE DEV_STM8S208
+
+#include "stm8.h"
+
+volatile unsigned char *sif= (unsigned char *)0x7fff;
+
+int sifchar(int c)
+{
+  *sif= 'p';
+  *sif= c;
+  return c;
+}
+
+void waitsend()
+{
+  while(!(USART->sr & USART_SR_TXE));
+}
+
+int putchar(int c)
+{
+  while(!(USART->sr & USART_SR_TXE));
+  USART->dr = c;
+  return c;
+}
+
+char received()
+{
+  return USART->sr & USART_SR_RXNE;
+}
+
+char getchar()
+{
+  while (!received())
+    ;
+  return USART->dr;
+}
+
+void prints(char *s)
+{
+  char i= 0;
+  while (s[i])
+    {
+      putchar(s[i]);
+      i++;
+    }
+}
+
+void main(void)
+{
+  unsigned long i = 0;
+
+  CLK->ckdivr = 0x00; // Set the frequency to 16 MHz
+  CLK->pckenr1 = 0xFF; // Enable peripherals
+
+  USART->cr2 = USART_CR2_TEN; // Allow TX only yet
+  USART->cr3 &= ~(USART_CR3_STOP1 | USART_CR3_STOP2); // 1 stop bit
+  USART->brr2 = 0x03;
+  USART->brr1 = 0x68; // 9600 baud
+  
+  printf("Hello World!\n");
+  waitsend();
+  USART->cr2 = USART_CR2_TEN | USART_CR2_REN; // Allow TX and RX
+  for (;;)
+    {
+      if (received())
+	{
+	  char c= getchar();
+	  *sif= 'x';*sif= c;
+	  putchar(toupper(c));
+	  if (c == 'Z')
+	    *sif= 's';
+	}
+    }
+}