sdcc-3.9.0 fork implementing GNU assembler syntax

This fork aims to provide better support for stm8-binutils

1 files changed, 1066 insertions, 0 deletions

diff --git a/support/sdbinutils/bfd/doc/Makefile b/support/sdbinutils/bfd/doc/Makefile
new file mode 100644
index 0000000..872ca50
--- /dev/null
+++ b/support/sdbinutils/bfd/doc/Makefile
@@ -0,0 +1,1066 @@
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# doc/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+#
+#   Copyright (C) 2012-2018 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
+#
+
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/bfd
+pkgincludedir = $(includedir)/bfd
+pkglibdir = $(libdir)/bfd
+pkglibexecdir = $(libexecdir)/bfd
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+target_triplet = asxxxx-unknown-unknown
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+#am__append_1 = bfd.info
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(bfd_TEXINFOS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
+	$(top_srcdir)/../config/depstand.m4 \
+	$(top_srcdir)/../config/gettext-sister.m4 \
+	$(top_srcdir)/../config/largefile.m4 \
+	$(top_srcdir)/../config/lead-dot.m4 \
+	$(top_srcdir)/../config/nls.m4 \
+	$(top_srcdir)/../config/override.m4 \
+	$(top_srcdir)/../config/plugins.m4 \
+	$(top_srcdir)/../config/po.m4 \
+	$(top_srcdir)/../config/progtest.m4 \
+	$(top_srcdir)/../config/stdint.m4 \
+	$(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
+	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
+	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
+	$(top_srcdir)/bfd.m4 $(top_srcdir)/warning.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/version.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+depcomp =
+am__depfiles_maybe =
+SOURCES =
+INFO_DEPS = bfd.info
+TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
+DVIS = bfd.dvi
+PDFS = bfd.pdf
+PSS = bfd.ps
+HTMLS = bfd.html
+TEXINFOS = bfd.texinfo
+TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \
+             echo $(top_srcdir)/../texinfo/util/texi2dvi; \
+           else \
+             echo texi2dvi; \
+           fi`
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+ACLOCAL = ${SHELL} /home/xavier/sdcc/support/sdbinutils/missing --run aclocal-1.11
+AMTAR = $${TAR-tar}
+AR = ar
+AUTOCONF = ${SHELL} /home/xavier/sdcc/support/sdbinutils/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/xavier/sdcc/support/sdbinutils/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/xavier/sdcc/support/sdbinutils/missing --run automake-1.11
+AWK = gawk
+BFD_HOSTPTR_T = unsigned long
+BFD_HOST_64BIT_LONG = 1
+BFD_HOST_64BIT_LONG_LONG = 0
+BFD_HOST_64_BIT = long
+BFD_HOST_64_BIT_DEFINED = 1
+BFD_HOST_U_64_BIT = unsigned long
+CATALOGS = 
+CATOBJEXT = 
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CC_FOR_BUILD = gcc
+CFLAGS = -g -O2
+COREFILE = 
+COREFLAG = 
+CPP = gcc -E
+CPPFLAGS = 
+CYGPATH_W = echo
+DATADIRNAME = 
+DEBUGDIR = ${exec_prefix}/lib/debug
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+EXEEXT_FOR_BUILD = $(EXEEXT)
+FGREP = /bin/grep -F
+GENCAT = 
+GMSGFMT = /usr/bin/msgfmt
+GREP = /bin/grep
+HDEFINES = 
+INCINTL = 
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = /usr/bin/install -c -m 644
+INSTALL_PROGRAM = /usr/bin/install -c
+INSTALL_SCRIPT = /usr/bin/install -c
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INSTOBJEXT = 
+LD = ld -m elf_x86_64
+LDFLAGS = -static-libstdc++ -static-libgcc 
+LIBINTL = 
+LIBINTL_DEP = 
+LIBM = -lm
+LIBOBJS = 
+LIBS = -ldl 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBOBJS = 
+MAINT = #
+MAKEINFO = makeinfo --split-size=5000000
+MKDIR_P = /bin/mkdir -p
+MKINSTALLDIRS = $(top_builddir)/./../mkinstalldirs
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+NM = nm
+NMEDIT = 
+NO_WERROR = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = bfd
+PACKAGE_BUGREPORT = 
+PACKAGE_NAME = bfd
+PACKAGE_STRING = bfd 2.30
+PACKAGE_TARNAME = bfd
+PACKAGE_URL = 
+PACKAGE_VERSION = 2.30
+PATH_SEPARATOR = :
+PKGVERSION = (sdbinutils derived from GNU Binutils) 
+POSUB = 
+RANLIB = ranlib
+REPORT_BUGS_TEXI = @uref{https://sourceforge.net/p/sdcc/bugs/}
+REPORT_BUGS_TO = <https://sourceforge.net/p/sdcc/bugs/>
+SED = /bin/sed
+SET_MAKE = 
+SHARED_LDFLAGS = 
+SHARED_LIBADD = 
+SHELL = /bin/bash
+STRIP = strip
+TDEFINES =   
+USE_NLS = yes
+VERSION = 2.30
+WARN_CFLAGS = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144
+WARN_CFLAGS_FOR_BUILD = -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144
+WARN_WRITE_STRINGS = -Wwrite-strings
+XGETTEXT = /usr/bin/xgettext
+abs_builddir = /home/xavier/sdcc/support/sdbinutils/bfd/doc
+abs_srcdir = /home/xavier/sdcc/support/sdbinutils/bfd/doc
+abs_top_builddir = /home/xavier/sdcc/support/sdbinutils/bfd
+abs_top_srcdir = /home/xavier/sdcc/support/sdbinutils/bfd
+ac_ct_CC = 
+ac_ct_DUMPBIN = 
+all_backends = $(BFD32_BACKENDS)
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bfd64_libs = 
+bfd_backends =  asxxxx.lo plugin.lo
+bfd_default_target_size = 32
+bfd_file_ptr = BFD_HOST_64_BIT
+bfd_machines =  cpu-z80.lo cpu-plugin.lo
+bfd_ufile_ptr = BFD_HOST_U_64_BIT
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = x86_64-pc-linux-gnu
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+havevecs = -DHAVE_asxxxx_vec -DHAVE_plugin_vec
+host = x86_64-pc-linux-gnu
+host_alias = x86_64-pc-linux-gnu
+host_cpu = x86_64
+host_noncanonical = x86_64-pc-linux-gnu
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /home/xavier/sdcc/support/sdbinutils/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+lt_cv_dlopen_libs = -ldl
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /usr/local
+program_transform_name = s,y,y,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+supports_plugins = 1
+sysconfdir = ${prefix}/etc
+target = asxxxx-unknown-unknown
+target_alias = x86_64-pc-linux-gnu
+target_cpu = x86_64
+target_noncanonical = x86_64-pc-linux-gnu
+target_os = linux-gnu
+target_vendor = pc
+tdefaults =  -DDEFAULT_VECTOR=asxxxx_vec -DSELECT_VECS='&asxxxx_vec,&plugin_vec' -DSELECT_ARCHITECTURES='&bfd_z80_arch,&bfd_plugin_arch'
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+wordsize = 32
+zlibdir = 
+zlibinc = 
+AUTOMAKE_OPTIONS = 1.9 cygnus
+DOCFILES = aoutx.texi  archive.texi archures.texi \
+	bfdt.texi  cache.texi coffcode.texi \
+	core.texi elf.texi elfcode.texi  format.texi \
+	libbfd.texi bfdwin.texi bfdio.texi \
+	opncls.texi  reloc.texi  section.texi  \
+	syms.texi  targets.texi init.texi hash.texi linker.texi \
+	mmo.texi \
+	bfdver.texi
+
+PROTOS = archive.p archures.p bfd.p \
+	 core.p format.p \
+	bfdio.p bfdwin.p \
+	libbfd.p opncls.p reloc.p \
+	section.p syms.p targets.p  \
+	format.p  core.p init.p
+
+IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip
+
+# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
+# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
+# you don't need these three:
+SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
+	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
+	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
+	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
+	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
+	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
+	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
+	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
+	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
+	$(srcdir)/../hash.c $(srcdir)/../linker.c \
+	$(srcdir)/../mmo.c
+
+SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
+	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
+	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
+	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
+	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
+	$(srcdir)/../section.c $(srcdir)/../syms.c \
+	$(srcdir)/../targets.c $(srcdir)/../init.c
+
+SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
+	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
+	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
+	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
+	$(srcdir)/../init.c
+
+TEXIDIR = $(srcdir)/../../texinfo/fsf
+info_TEXINFOS = bfd.texinfo
+bfd_TEXINFOS = $(DOCFILES) bfdsumm.texi
+MKDOC = chew$(EXEEXT_FOR_BUILD)
+AM_CPPFLAGS = -I.. -I$(srcdir)/.. -I$(srcdir)/../../include \
+	-I$(srcdir)/../../intl -I../../intl
+
+LIBBFD_H_DEP = \
+	$(srcdir)/../libbfd-in.h	\
+	$(srcdir)/../libbfd.c		\
+	$(srcdir)/../bfdio.c		\
+	$(srcdir)/../bfdwin.c		\
+	$(srcdir)/../cache.c		\
+	$(srcdir)/../reloc.c		\
+	$(srcdir)/../archures.c		\
+	$(srcdir)/../linker.c		\
+	$(srcdir)/header.sed		\
+	$(srcdir)/proto.str		\
+	$(MKDOC)
+
+LIBCOFF_H_DEP = \
+	$(srcdir)/../libcoff-in.h	\
+	$(srcdir)/../coffcode.h		\
+	$(srcdir)/header.sed		\
+	$(srcdir)/proto.str		\
+	$(MKDOC)
+
+BFD_H_DEP = \
+	$(srcdir)/../bfd-in.h 		\
+	$(srcdir)/../init.c 		\
+	$(srcdir)/../opncls.c 		\
+	$(srcdir)/../libbfd.c 		\
+	$(srcdir)/../bfdio.c		\
+	$(srcdir)/../bfdwin.c		\
+	$(srcdir)/../section.c 		\
+	$(srcdir)/../archures.c		\
+	$(srcdir)/../reloc.c		\
+	$(srcdir)/../syms.c		\
+	$(srcdir)/../bfd.c		\
+	$(srcdir)/../archive.c		\
+	$(srcdir)/../corefile.c		\
+	$(srcdir)/../targets.c		\
+	$(srcdir)/../format.c		\
+	$(srcdir)/../linker.c		\
+	$(srcdir)/../simple.c		\
+	$(srcdir)/../compress.c		\
+	$(srcdir)/header.sed		\
+	$(srcdir)/proto.str		\
+	$(srcdir)/../version.h		\
+	$(MKDOC)
+
+noinst_TEXINFOS = bfdint.texi
+MOSTLYCLEANFILES = $(MKDOC) *.o *.stamp
+CLEANFILES = *.p *.ip
+DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
+	$(am__append_1)
+MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .ps
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+bfd.info: bfd.texinfo $(bfd_TEXINFOS)
+	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
+	then \
+	  rc=0; \
+	else \
+	  rc=$$?; \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+bfd.dvi: bfd.texinfo $(bfd_TEXINFOS) 
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
+
+bfd.pdf: bfd.texinfo $(bfd_TEXINFOS) 
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2PDF) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
+
+bfd.html: bfd.texinfo $(bfd_TEXINFOS) 
+	rm -rf $(@:.html=.htp)
+	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
+	then \
+	  rm -rf $@; \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+	else \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+	  exit 1; \
+	fi
+.dvi.ps:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) -o $@ $<
+
+uninstall-dvi-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+	done
+
+uninstall-html-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+	done
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+uninstall-pdf-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+	done
+
+uninstall-ps-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+	    if test -f $$file; then \
+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	      test -f "$(distdir)/$$relfile" || \
+		cp -p $$file "$(distdir)/$$relfile"; \
+	    else :; fi; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf bfd.aux bfd.cp bfd.cps bfd.fn bfd.ky bfd.kys bfd.log bfd.pg bfd.pgs \
+	  bfd.tmp bfd.toc bfd.tp bfd.tps bfd.vr bfd.vrs
+
+clean-aminfo:
+	-test -z "bfd.dvi bfd.pdf bfd.ps bfd.html" \
+	|| rm -rf bfd.dvi bfd.pdf bfd.ps bfd.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+
+clean-info: mostlyclean-aminfo clean-aminfo
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+check-am:
+check: check-am
+all-am: Makefile
+installdirs:
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+	@$(NORMAL_INSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+	done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  d2=$$d$$p; \
+	  if test -d "$$d2"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d2"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+	fi; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      echo "$$ifile"; \
+	    else : ; fi; \
+	  done; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+	@$(POST_INSTALL)
+	@if $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+	@$(NORMAL_INSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-pdf-am uninstall-ps-am
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+	clean-info clean-libtool dist-info distclean distclean-generic \
+	distclean-libtool dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
+	uninstall-info-am uninstall-pdf-am uninstall-ps-am
+
+
+$(MKDOC): chew.stamp ; @true
+chew.stamp: $(srcdir)/chew.c
+	$(CC_FOR_BUILD) -o chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
+	  $(LDFLAGS_FOR_BUILD) $(H_CFLAGS) $(AM_CPPFLAGS) $(srcdir)/chew.c; \
+	$(SHELL) $(srcdir)/../../move-if-change \
+	  chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC); \
+	touch $@
+
+protos: libbfd.h libcoff.h bfd.h
+
+# We can't replace these rules with an implicit rule, because
+# makes without VPATH support couldn't find the .h files in `..'.
+
+# We do not depend on chew directly so that we can distribute the info
+# files, and permit people to rebuild them, without requiring the makeinfo
+# program.  If somebody tries to rebuild info, but none of the .texi files
+# have changed, then nothing will be rebuilt.
+
+aoutx.texi: aoutx.stamp ; @true
+aoutx.stamp: $(srcdir)/../aoutx.h $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../aoutx.h >aoutx.tmp
+	test -e aoutx.texi || test ! -f $(srcdir)/aoutx.texi || cp -p $(srcdir)/aoutx.texi .
+	$(SHELL) $(srcdir)/../../move-if-change aoutx.tmp aoutx.texi
+	touch $@
+
+archive.texi: archive.stamp ; @true
+archive.stamp: $(srcdir)/../archive.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archive.c >archive.tmp
+	test -e archive.texi || test ! -f $(srcdir)/archive.texi || cp -p $(srcdir)/archive.texi .
+	$(SHELL) $(srcdir)/../../move-if-change archive.tmp archive.texi
+	touch $@
+
+archures.texi: archures.stamp ; @true
+archures.stamp: $(srcdir)/../archures.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archures.c >archures.tmp
+	test -e archures.texi || test ! -f $(srcdir)/archures.texi || cp -p $(srcdir)/archures.texi .
+	$(SHELL) $(srcdir)/../../move-if-change archures.tmp archures.texi
+	touch $@
+
+# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
+# bfd.texinfo on an 8.3 filesystem.
+bfdt.texi: bfdt.stamp ; @true
+bfdt.stamp: $(srcdir)/../bfd.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfd.c >bfd.tmp
+	test -e bfdt.texi || test ! -f $(srcdir)/bfdt.texi || cp -p $(srcdir)/bfdt.texi .
+	$(SHELL) $(srcdir)/../../move-if-change bfd.tmp bfdt.texi
+	touch $@
+
+cache.texi: cache.stamp ; @true
+cache.stamp: $(srcdir)/../cache.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../cache.c >cache.tmp
+	test -e cache.texi || test ! -f $(srcdir)/cache.texi || cp -p $(srcdir)/cache.texi .
+	$(SHELL) $(srcdir)/../../move-if-change cache.tmp cache.texi
+	touch $@
+
+coffcode.texi: coffcode.stamp ; @true
+coffcode.stamp: $(srcdir)/../coffcode.h $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../coffcode.h >coffcode.tmp
+	test -e coffcode.texi || test ! -f $(srcdir)/coffcode.texi || cp -p $(srcdir)/coffcode.texi .
+	$(SHELL) $(srcdir)/../../move-if-change coffcode.tmp coffcode.texi
+	touch $@
+
+core.texi: core.stamp ; @true
+core.stamp: $(srcdir)/../corefile.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../corefile.c >core.tmp
+	test -e core.texi || test ! -f $(srcdir)/core.texi || cp -p $(srcdir)/core.texi .
+	$(SHELL) $(srcdir)/../../move-if-change core.tmp core.texi
+	touch $@
+
+elf.texi: elf.stamp ; @true
+elf.stamp: $(srcdir)/../elf.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../elf.c >elf.tmp
+	test -e elf.texi || test ! -f $(srcdir)/elf.texi || cp -p $(srcdir)/elf.texi .
+	$(SHELL) $(srcdir)/../../move-if-change elf.tmp elf.texi
+	touch $@
+
+elfcode.texi: elfcode.stamp ; @true
+elfcode.stamp: $(srcdir)/../elfcode.h $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../elfcode.h >elfcode.tmp
+	test -e elfcode.texi || test ! -f $(srcdir)/elfcode.texi || cp -p $(srcdir)/elfcode.texi .
+	$(SHELL) $(srcdir)/../../move-if-change elfcode.tmp elfcode.texi
+	touch $@
+
+mmo.texi: mmo.stamp ; @true
+mmo.stamp: $(srcdir)/../mmo.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../mmo.c >mmo.tmp
+	test -e mmo.texi || test ! -f $(srcdir)/mmo.texi || cp -p $(srcdir)/mmo.texi .
+	$(SHELL) $(srcdir)/../../move-if-change mmo.tmp mmo.texi
+	touch $@
+
+format.texi: format.stamp ; @true
+format.stamp: $(srcdir)/../format.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../format.c >format.tmp
+	test -e format.texi || test ! -f $(srcdir)/format.texi || cp -p $(srcdir)/format.texi .
+	$(SHELL) $(srcdir)/../../move-if-change format.tmp format.texi
+	touch $@
+
+libbfd.texi: libbfd.stamp ; @true
+libbfd.stamp: $(srcdir)/../libbfd.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../libbfd.c >libbfd.tmp
+	test -e libbfd.texi || test ! -f $(srcdir)/libbfd.texi || cp -p $(srcdir)/libbfd.texi .
+	$(SHELL) $(srcdir)/../../move-if-change libbfd.tmp libbfd.texi
+	touch $@
+
+bfdio.texi: bfdio.stamp ; @true
+bfdio.stamp: $(srcdir)/../bfdio.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdio.c >bfdio.tmp
+	test -e bfdio.texi || test ! -f $(srcdir)/bfdio.texi || cp -p $(srcdir)/bfdio.texi .
+	$(SHELL) $(srcdir)/../../move-if-change bfdio.tmp bfdio.texi
+	touch $@
+
+bfdwin.texi: bfdwin.stamp ; @true
+bfdwin.stamp: $(srcdir)/../bfdwin.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdwin.c >bfdwin.tmp
+	test -e bfdwin.texi || test ! -f $(srcdir)/bfdwin.texi || cp -p $(srcdir)/bfdwin.texi .
+	$(SHELL) $(srcdir)/../../move-if-change bfdwin.tmp bfdwin.texi
+	touch $@
+
+opncls.texi: opncls.stamp ; @true
+opncls.stamp: $(srcdir)/../opncls.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../opncls.c >opncls.tmp
+	test -e opncls.texi || test ! -f $(srcdir)/opncls.texi || cp -p $(srcdir)/opncls.texi .
+	$(SHELL) $(srcdir)/../../move-if-change opncls.tmp opncls.texi
+	touch $@
+
+reloc.texi: reloc.stamp ; @true
+reloc.stamp: $(srcdir)/../reloc.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../reloc.c >reloc.tmp
+	test -e reloc.texi || test ! -f $(srcdir)/reloc.texi || cp -p $(srcdir)/reloc.texi .
+	$(SHELL) $(srcdir)/../../move-if-change reloc.tmp reloc.texi
+	touch $@
+
+section.texi: section.stamp ; @true
+section.stamp: $(srcdir)/../section.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../section.c >section.tmp
+	test -e section.texi || test ! -f $(srcdir)/section.texi || cp -p $(srcdir)/section.texi .
+	$(SHELL) $(srcdir)/../../move-if-change section.tmp section.texi
+	touch $@
+
+syms.texi: syms.stamp ; @true
+syms.stamp: $(srcdir)/../syms.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../syms.c >syms.tmp
+	test -e syms.texi || test ! -f $(srcdir)/syms.texi || cp -p $(srcdir)/syms.texi .
+	$(SHELL) $(srcdir)/../../move-if-change syms.tmp syms.texi
+	touch $@
+
+targets.texi: targets.stamp ; @true
+targets.stamp: $(srcdir)/../targets.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../targets.c >targets.tmp
+	test -e targets.texi || test ! -f $(srcdir)/targets.texi || cp -p $(srcdir)/targets.texi .
+	$(SHELL) $(srcdir)/../../move-if-change targets.tmp targets.texi
+	touch $@
+
+init.texi: init.stamp ; @true
+init.stamp: $(srcdir)/../init.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../init.c >init.tmp
+	test -e init.texi || test ! -f $(srcdir)/init.texi || cp -p $(srcdir)/init.texi .
+	$(SHELL) $(srcdir)/../../move-if-change init.tmp init.texi
+	touch $@
+
+hash.texi: hash.stamp ; @true
+hash.stamp: $(srcdir)/../hash.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../hash.c >hash.tmp
+	test -e hash.texi || test ! -f $(srcdir)/hash.texi || cp -p $(srcdir)/hash.texi .
+	$(SHELL) $(srcdir)/../../move-if-change hash.tmp hash.texi
+	touch $@
+
+linker.texi: linker.stamp ; @true
+linker.stamp: $(srcdir)/../linker.c $(srcdir)/doc.str $(MKDOC)
+	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../linker.c >linker.tmp
+	test -e linker.texi || test ! -f $(srcdir)/linker.texi || cp -p $(srcdir)/linker.texi .
+	$(SHELL) $(srcdir)/../../move-if-change linker.tmp linker.texi
+	touch $@
+
+libbfd.h: $(LIBBFD_H_DEP)
+	echo "$(LIBBFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
+	for file in $(LIBBFD_H_DEP); do \
+	  case $$file in \
+	    *-in.h) cat $$file >> $@ ;; \
+	    */header.sed) break ;; \
+	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
+				-e 's,$$,.  */,' >> $@ ; \
+		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
+	  esac; \
+	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
+
+libcoff.h: $(LIBCOFF_H_DEP)
+	echo "$(LIBCOFF_H_DEP)" | sed -f $(srcdir)/header.sed > $@
+	for file in $(LIBCOFF_H_DEP); do \
+	  case $$file in \
+	    *-in.h) cat $$file >> $@ ;; \
+	    */header.sed) break ;; \
+	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
+				-e 's,$$,.  */,' >> $@ ; \
+		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
+	  esac; \
+	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
+
+bfd.h: $(BFD_H_DEP)
+	echo "$(BFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
+	for file in $(BFD_H_DEP); do \
+	  case $$file in \
+	    *-in.h) cat $$file >> $@ ;; \
+	    */header.sed) break ;; \
+	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
+				-e 's,$$,.  */,' >> $@ ; \
+		./$(MKDOC) -f $(srcdir)/proto.str < $$file >> $@ ;; \
+	  esac; \
+	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
+	echo "#endif" >> $@
+
+bfdver.texi: $(srcdir)/Makefile.in
+	@echo "creating $@"; \
+	echo "@set VERSION $(VERSION)" > bfdver.texi; \
+	if test -n "$(PKGVERSION)"; then \
+	  echo "@set VERSION_PACKAGE $(PKGVERSION)" >> bfdver.texi; \
+	fi; \
+	echo "@set UPDATED `date '+%B %Y'`" >> bfdver.texi; \
+	if test -n "$(REPORT_BUGS_TEXI)"; then \
+	  echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> bfdver.texi; \
+	fi
+
+# We want install to imply install-info as per GNU standards, despite the
+# cygnus option.
+# Do not install info documentation when installing SDCC
+# install: install-info
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: