path: root/drivers/misc/mediatek/connectivity/wlan/gen2/include/nic/adapter.h

/*
** Id: //Department/DaVinci/BRANCHES/MT6620_WIFI_DRIVER_V2_3/include/nic/adapter.h#3
*/

/*! \file   adapter.h
    \brief  Definition of internal data structure for driver manipulation.

    In this file we define the internal data structure - ADAPTER_T which stands
    for MiniPort ADAPTER(From Windows point of view) or stands for Network ADAPTER.
*/

/*
** Log: adapter.h
**
** 08 31 2012 yuche.tsai
** [ALPS00349585] [6577JB][WiFi direct][KE]Establish p2p connection while both device have
** connected to AP previously,one device reboots automatically with KE
** Fix possible KE when concurrent & disconnect.
**
** 07 26 2012 yuche.tsai
** [ALPS00324337] [ALPS.JB][Hot-Spot] Driver update for Hot-Spot
** Update driver code of ALPS.JB for hot-spot.
 *
 * 07 17 2012 yuche.tsai
 * NULL
 * Let netdev bring up.
 *
 * 07 17 2012 yuche.tsai
 * NULL
 * Compile no error before trial run.
 *
 * 06 13 2012 yuche.tsai
 * NULL
 * Update maintrunk driver.
 * Add support for driver compose assoc request frame.
 *
 * 03 02 2012 terry.wu
 * NULL
 * Snc CFG80211 modification for ICS migration from branch 2.2.
 *
 * 03 02 2012 terry.wu
 * NULL
 * Sync CFG80211 modification from branch 2,2.
 *
 * 01 16 2012 cp.wu
 * [MT6620 Wi-Fi][Driver] API and behavior modification for preferred band configuration
 * with corresponding network configuration
 * add wlanSetPreferBandByNetwork() for glue layer to invoke for setting preferred band configuration
 * corresponding to network type.
 *
 * 12 13 2011 cm.chang
 * [WCXRP00001136] [All Wi-Fi][Driver] Add wake lock for pending timer
 * Add wake lock if timer timeout value is smaller than 5 seconds
 *
 * 12 02 2011 yuche.tsai
 * NULL
 * Resolve inorder issue under AP mode.
 *
 * data frame may TX before assoc response frame.
 *
 * 11 19 2011 yuche.tsai
 * NULL
 * Update RSSI for P2P.
 *
 * 11 18 2011 yuche.tsai
 * NULL
 * CONFIG P2P support RSSI query, default turned off.
 *
 * 11 11 2011 yuche.tsai
 * NULL
 * Fix work thread cancel issue.
 *
 * 10 21 2011 eddie.chen
 * [WCXRP00001051] [MT6620 Wi-Fi][Driver/Fw] Adjust the STA aging timeout
 * Add switch to ignore the STA aging timeout.
 *
 * 10 12 2011 wh.su
 * [WCXRP00001036] [MT6620 Wi-Fi][Driver][FW] Adding the 802.11w code for MFP
 * adding the 802.11w related function and define .
 *
 * 09 20 2011 cm.chang
 * [WCXRP00000997] [MT6620 Wi-Fi][Driver][FW] Handle change of BSS preamble type and slot time
 * Remove ERP member in adapter structure
 *
 * 09 14 2011 yuche.tsai
 * NULL
 * Add P2P IE in assoc response.
 *
 * 08 31 2011 cm.chang
 * [WCXRP00000969] [MT6620 Wi-Fi][Driver][FW] Channel list for 5G band based on country code
 * .
 *
 * 07 18 2011 chinghwa.yu
 * [WCXRP00000063] Update BCM CoEx design and settings[WCXRP00000612] [MT6620 Wi-Fi] [FW] CSD update SWRDD algorithm
 * Add CMD/Event for RDD and BWCS.
 *
 * 06 23 2011 cp.wu
 * [WCXRP00000812] [MT6620 Wi-Fi][Driver] not show NVRAM when there is no valid MAC address in NVRAM content
 * check with firmware for valid MAC address.
 *
 * 04 18 2011 terry.wu
 * [WCXRP00000660] [MT6620 Wi-Fi][Driver] Remove flag CFG_WIFI_DIRECT_MOVED
 * Remove flag CFG_WIFI_DIRECT_MOVED.
 *
 * 04 12 2011 cm.chang
 * [WCXRP00000634] [MT6620 Wi-Fi][Driver][FW] 2nd BSS will not support 40MHz bandwidth for concurrency
 * .
 *
 * 04 08 2011 yuche.tsai
 * [WCXRP00000624] [Volunteer Patch][MT6620][Driver] Add device discoverability support for GO.
 * Add device discoverability support.
 * Action frame callback for GO Device Discoverability Req.
 *
 * 04 08 2011 george.huang
 * [WCXRP00000621] [MT6620 Wi-Fi][Driver] Support P2P supplicant to set power mode
 * separate settings of P2P and AIS
 *
 * 04 08 2011 eddie.chen
 * [WCXRP00000617] [MT6620 Wi-Fi][DRV/FW] Fix for sigma
 * Fix for sigma
 *
 * 03 19 2011 yuche.tsai
 * [WCXRP00000584] [Volunteer Patch][MT6620][Driver] Add beacon timeout support for WiFi Direct.
 * Add beacon timeout support for WiFi Direct Network.
 *
 * 03 19 2011 yuche.tsai
 * [WCXRP00000581] [Volunteer Patch][MT6620][Driver] P2P IE in Assoc Req Issue
 * Make assoc req to append P2P IE if wifi direct is enabled.
 *
 * 03 17 2011 cp.wu
 * [WCXRP00000562] [MT6620 Wi-Fi][Driver] I/O buffer pre-allocation to avoid physically
 * continuous memory shortage after system running for a long period
 * use pre-allocated buffer for storing enhanced interrupt response as well
 *
 * 03 15 2011 cp.wu
 * [WCXRP00000559] [MT6620 Wi-Fi][Driver] Combine TX/RX DMA buffers into a single one to reduce
 * physically continuous memory consumption
 * 1. deprecate CFG_HANDLE_IST_IN_SDIO_CALLBACK
 * 2. Use common coalescing buffer for both TX/RX directions
 *
 *
 * 03 10 2011 yuche.tsai
 * [WCXRP00000533] [Volunteer Patch][MT6620][Driver] Provide a P2P function API for Legacy WiFi to query AP mode.
 * Provide an API for Legacy WiFi to query the operation mode..
 *
 * 03 05 2011 wh.su
 * [WCXRP00000506] [MT6620 Wi-Fi][Driver][FW] Add Security check related code
 * add the code to get the check rsponse and indicate to app.
 *
 * 03 02 2011 wh.su
 * [WCXRP00000448] [MT6620 Wi-Fi][Driver] Fixed WSC IE not send out at probe request
 * Add code to send beacon and probe response WSC IE at Auto GO.
 *
 * 03 02 2011 cp.wu
 * [WCXRP00000503] [MT6620 Wi-Fi][Driver] Take RCPI brought by association response as
 * initial RSSI right after connection is built.
 * use RCPI brought by ASSOC-RESP after connection is built as initial RCPI to avoid
 * using a uninitialized MAC-RX RCPI.
 *
 * 02 21 2011 terry.wu
 * [WCXRP00000476] [MT6620 Wi-Fi][Driver] Clean P2P scan list while removing P2P
 * Clean P2P scan list while removing P2P.
 *
 * 02 17 2011 eddie.chen
 * [WCXRP00000458] [MT6620 Wi-Fi][Driver] BOW Concurrent - ProbeResp was exist in other channel
 * 1) Change GetFrameAction decision when BSS is absent.
 * 2) Check channel and resource in processing ProbeRequest
 *
 * 02 16 2011 cm.chang
 * [WCXRP00000447] [MT6620 Wi-Fi][FW] Support new NVRAM update mechanism
 * .
 *
 * 02 10 2011 yuche.tsai
 * [WCXRP00000431] [Volunteer Patch][MT6620][Driver] Add MLME support for deauthentication under AP(Hot-Spot) mode.
 * Add RX deauthentication & disassociation process under Hot-Spot mode.
 *
 * 02 09 2011 wh.su
 * [WCXRP00000433] [MT6620 Wi-Fi][Driver] Remove WAPI structure define for avoid P2P module
 * with structure miss-align pointer issue
 * always pre-allio WAPI related structure for align p2p module.
 *
 * 02 08 2011 yuche.tsai
 * [WCXRP00000419] [Volunteer Patch][MT6620/MT5931][Driver] Provide function of disconnect to
 * target station for AAA module.
 * Provide disconnect function for AAA module.
 *
 * 02 01 2011 cm.chang
 * [WCXRP00000415] [MT6620 Wi-Fi][Driver] Check if any memory leakage happens when uninitializing in DGB mode
 * .
 *
 * 01 27 2011 tsaiyuan.hsu
 * [WCXRP00000392] [MT6620 Wi-Fi][Driver] Add Roaming Support
 * add roaming fsm
 * 1. not support 11r, only use strength of signal to determine roaming.
 * 2. not enable CFG_SUPPORT_ROAMING until completion of full test.
 * 3. in 6620, adopt work-around to avoid sign extension problem of cck of hw
 * 4. assume that change of link quality in smooth way.
 *
 * 01 27 2011 george.huang
 * [WCXRP00000400] [MT6620 Wi-Fi] support CTIA power mode setting
 * Support CTIA power mode setting.
 *
 * 01 27 2011 george.huang
 * [WCXRP00000355] [MT6620 Wi-Fi] Set WMM-PS related setting with qualifying AP capability
 * Support current measure mode, assigned by registry (XP only).
 *
 * 01 24 2011 cp.wu
 * [WCXRP00000382] [MT6620 Wi-Fi][Driver] Track forwarding packet number with notifying tx thread for serving
 * 1. add an extra counter for tracking pending forward frames.
 * 2. notify TX service thread as well when there is pending forward frame
 * 3. correct build errors leaded by introduction of Wi-Fi direct separation module
 *
 * 01 12 2011 cm.chang
 * [WCXRP00000354] [MT6620 Wi-Fi][Driver][FW] Follow NVRAM bandwidth setting
 * User-defined bandwidth is for 2.4G and 5G individually
 *
 * 12 29 2010 eddie.chen
 * [WCXRP00000322] Add WMM IE in beacon,

Add per station flow control when STA is in PS

 * Add WMM parameter for broadcast.
 *
 * 12 29 2010 eddie.chen
 * [WCXRP00000322] Add WMM IE in beacon,

Add per station flow control when STA is in PS

 * Add CWMin CWMax for AP to generate IE.
 *
 * 12 29 2010 eddie.chen
 * [WCXRP00000322] Add WMM IE in beacon,
Add per station flow control when STA is in PS

 * 1) PS flow control event
 *
 * 2) WMM IE in beacon, assoc resp, probe resp
 *
 * 12 28 2010 cp.wu
 * [WCXRP00000269] [MT6620 Wi-Fi][Driver][Firmware] Prepare for v1.1 branch release
 * report EEPROM used flag via NIC_CAPABILITY
 *
 * 12 28 2010 cp.wu
 * [WCXRP00000269] [MT6620 Wi-Fi][Driver][Firmware] Prepare for v1.1 branch release
 * integrate with 'EEPROM used' flag for reporting correct capability to Engineer Mode/META and other tools
 *
 * 12 07 2010 cm.chang
 * [WCXRP00000238] MT6620 Wi-Fi][Driver][FW] Support regulation domain setting from NVRAM and supplicant
 * 1. Country code is from NVRAM or supplicant
 * 2. Change band definition in CMD/EVENT.
 *
 * 11 01 2010 cp.wu
 * [WCXRP00000056] [MT6620 Wi-Fi][Driver] NVRAM implementation with Version Check[WCXRP00000150] [MT6620 Wi-Fi][Driver]
 * Add implementation for querying current TX rate from firmware auto rate module
 * 1) Query link speed (TX rate) from firmware directly with buffering mechanism to reduce overhead
 * 2) Remove CNM CH-RECOVER event handling
 * 3) cfg read/write API renamed with kal prefix for unified naming rules.
 *
 * 10 27 2010 george.huang
 * [WCXRP00000127] [MT6620 Wi-Fi][Driver] Add a registry to disable Beacon Timeout function for SQA test by using E1 EVB
 * Support registry option for disable beacon lost detection.
 *
 * 10 26 2010 cp.wu
 * [WCXRP00000056] [MT6620 Wi-Fi][Driver] NVRAM implementation with Version Check[WCXRP00000137] [MT6620 Wi-Fi] [FW]
 * Support NIC capability query command
 * 1) update NVRAM content template to ver 1.02
 * 2) add compile option for querying NIC capability (default: off)
 * 3) modify AIS 5GHz support to run-time option, which could be turned on by registry or NVRAM setting
 * 4) correct auto-rate compiler error under linux (treat warning as error)
 * 5) simplify usage of NVRAM and REG_INFO_T
 * 6) add version checking between driver and firmware
 *
 * 10 08 2010 cp.wu
 * [WCXRP00000084] [MT6620 Wi-Fi][Driver][FW] Add fixed rate support for distance test
 * adding fixed rate support for distance test. (from registry setting)
 *
 * 10 06 2010 cp.wu
 * [WCXRP00000052] [MT6620 Wi-Fi][Driver] Eliminate Linux Compile Warning
 * code reorganization to improve isolation between GLUE and CORE layers.
 *
 * 10 05 2010 cp.wu
 * [WCXRP00000056] [MT6620 Wi-Fi][Driver] NVRAM implementation with Version Check
 * 1) add NVRAM access API
 * 2) fake scanning result when NVRAM doesn't exist and/or version mismatch. (off by compiler option)
 * 3) add OID implementation for NVRAM read/write service
 *
 * 09 27 2010 chinghwa.yu
 * [WCXRP00000063] Update BCM CoEx design and settings[WCXRP00000065] Update BoW design and settings
 * Update BCM/BoW design and settings.
 *
 * 09 24 2010 cp.wu
 * [WCXRP00000057] [MT6620 Wi-Fi][Driver] Modify online scan to a run-time switchable feature
 * Modify online scan as a run-time adjustable option (for Windows, in registry)
 *
 * 09 23 2010 cp.wu
 * [WCXRP00000051] [MT6620 Wi-Fi][Driver] WHQL test fail in MAC address changed item
 * use firmware reported mac address right after wlanAdapterStart() as permanent address
 *
 * 09 08 2010 cp.wu
 * NULL
 * use static memory pool for storing IEs of scanning result.
 *
 * 09 07 2010 yuche.tsai
 * NULL
 * Add a common IE buffer in P2P INFO structure.
 *
 * 09 03 2010 kevin.huang
 * NULL
 * Refine #include sequence and solve recursive/nested #include issue
 *
 * 09 01 2010 cp.wu
 * NULL
 * restore configuration as before.
 *
 * 09 01 2010 wh.su
 * NULL
 * adding the wapi support for integration test.
 *
 * 08 31 2010 kevin.huang
 * NULL
 * Use LINK LIST operation to process SCAN result
 *
 * 08 29 2010 yuche.tsai
 * NULL
 * Finish SLT TX/RX & Rate Changing Support.
 *
 * 08 25 2010 george.huang
 * NULL
 * update OID/ registry control path for PM related settings
 *
 * 08 24 2010 cm.chang
 * NULL
 * Support RLM initail channel of Ad-hoc, P2P and BOW
 *
 * 08 23 2010 chinghwa.yu
 * NULL
 * Update for BOW.
 *
 * 08 20 2010 cm.chang
 * NULL
 * Migrate RLM code to host from FW
 *
 * 08 16 2010 yuche.tsai
 * NULL
 * Add an intend mode for BSS info.
 * It is used to let P2P BSS Info to know which OP Mode it is going to become.
 *
 * 08 04 2010 george.huang
 * NULL
 * handle change PS mode OID/ CMD
 *
 * 08 02 2010 cp.wu
 * NULL
 * comment out deprecated members in BSS_INFO, which are only used by firmware rather than driver.
 *
 * 07 29 2010 cp.wu
 * NULL
 * eliminate u4FreqInKHz usage, combined into rConnections.ucAdHoc*
 *
 * 07 28 2010 cp.wu
 * NULL
 * 1) eliminate redundant variable eOPMode in prAdapter->rWlanInfo
 * 2) change nicMediaStateChange() API prototype
 *
 * 07 24 2010 wh.su
 *
 * .support the Wi-Fi RSN
 *
 * 07 21 2010 yuche.tsai
 *
 * Add for P2P Scan Result Parsing & Saving.
 *
 * 07 19 2010 wh.su
 *
 * update for security supporting.
 *
 * 07 19 2010 cm.chang
 *
 * Set RLM parameters and enable CNM channel manager
 *
 * 07 19 2010 yuche.tsai
 *
 * Remove BSS info which is redonedent in Wifi Var..
 *
 * 07 16 2010 yarco.yang
 *
 * 1. Support BSS Absence/Presence Event
 * 2. Support STA change PS mode Event
 * 3. Support BMC forwarding for AP mode.
 *
 * 07 14 2010 yarco.yang
 *
 * 1. Remove CFG_MQM_MIGRATION
 * 2. Add CMD_UPDATE_WMM_PARMS command
 *
 * 07 09 2010 george.huang
 *
 * [WPD00001556] Migrate PM variables from FW to driver: for composing QoS Info
 *
 * 07 08 2010 cp.wu
 *
 * [WPD00003833] [MT6620 and MT5931] Driver migration - move to new repository.
 *
 * 07 08 2010 cm.chang
 * [WPD00003841][LITE Driver] Migrate RLM/CNM to host driver
 * Check draft RLM code for HT cap
 *
 * 06 29 2010 yarco.yang
 * [WPD00003837][MT6620]Data Path Refine
 * replace g_rQM with Adpater->rQM
 *
 * 06 28 2010 cm.chang
 * [WPD00003841][LITE Driver] Migrate RLM/CNM to host driver
 * 1st draft code for RLM module
 *
 * 06 21 2010 wh.su
 * [WPD00003840][MT6620 5931] Security migration
 * remove duplicate variable for migration.
 *
 * 06 21 2010 wh.su
 * [WPD00003840][MT6620 5931] Security migration
 * modify some code for concurrent network.
 *
 * 06 21 2010 yuche.tsai
 * [WPD00003839][MT6620 5931][P2P] Feature migration
 * Add P2P FSM Info in adapter.
 *
 * 06 21 2010 yarco.yang
 * [WPD00003837][MT6620]Data Path Refine
 * Support CFG_MQM_MIGRATION flag
 *
 * 06 18 2010 cm.chang
 * [WPD00003841][LITE Driver] Migrate RLM/CNM to host driver
 * Provide cnmMgtPktAlloc() and alloc/free function of msg/buf
 *
 * 06 18 2010 wh.su
 * [WPD00003840][MT6620 5931] Security migration
 * migration the security related function from firmware.
 *
 * 06 17 2010 yuche.tsai
 * [WPD00003839][MT6620 5931][P2P] Feature migration
 * Add P2P related field, additional include p2p_fsm.h if p2p is enabled.
 *
 * 06 15 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * add scan.c.
 *
 * 06 14 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * add management dispatching function table.
 *
 * 06 11 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * auth.c is migrated.
 *
 * 06 11 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * 1) migrate assoc.c.
 * 2) add ucTxSeqNum for tracking frames which needs TX-DONE awareness
 * 3) add configuration options for CNM_MEM and RSN modules
 * 4) add data path for management frames
 * 5) eliminate rPacketInfo of MSDU_INFO_T
 *
 * 06 10 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * add buildable & linkable ais_fsm.c
 *
 * related reference are still waiting to be resolved
 *
 * 06 09 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * add definitions for module migration.
 *
 * 06 08 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * cnm_timer has been migrated.
 *
 * 06 08 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * hem_mbox is migrated.
 *
 * 06 07 2010 cp.wu
 * [WPD00003833][MT6620 and MT5931] Driver migration
 * merge wifi_var.h, precomp.h, cnm_timer.h (data type only)
 *
 * 06 06 2010 kevin.huang
 * [WPD00003832][MT6620 5931] Create driver base
 * [MT6620 5931] Create driver base
 *
 * 05 22 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * change OID behavior to meet WHQL requirement.
 *
 * 05 20 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * 1) integrate OID_GEN_NETWORK_LAYER_ADDRESSES with CMD_ID_SET_IP_ADDRESS
 * 2) buffer statistics data for 2 seconds
 * 3) use default value for adhoc parameters instead of 0
 *
 * 05 19 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * 1) do not take timeout mechanism for power mode oids
 * 2) retrieve network type from connection status
 * 3) after disassciation, set radio state to off
 * 4) TCP option over IPv6 is supported
 *
 * 05 18 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * implement Wakeup-on-LAN except firmware integration part
 *
 * 04 27 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * reserve field of privacy filter and RTS threshold setting.
 *
 * 04 13 2010 cp.wu
 * [WPD00003823][MT6620 Wi-Fi] Add Bluetooth-over-Wi-Fi support
 * add framework for BT-over-Wi-Fi support.
 *  *  *  *  *  * 1) prPendingCmdInfo is replaced by queue for multiple handler capability
 *  *  *  *  *  * 2) command sequence number is now increased atomically
 *  *  *  *  *  * 3) private data could be hold and taken use for other purpose
 *
 * 04 07 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * rWlanInfo should be placed at adapter rather than glue due to most operations
 *  *  * are done in adapter layer.
 *
 * 04 06 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * code refine: fgTestMode should be at adapter rather than glue due to the device/fw is also involved
 *
 * 03 31 2010 wh.su
 * [WPD00003816][MT6620 Wi-Fi] Adding the security support
 * modify the wapi related code for new driver's design.
 *
 * 03 19 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * 1) add ACPI D0/D3 state switching support
 *  *  * 2) use more formal way to handle interrupt when the status is retrieved from enhanced RX response
 *
 * 03 03 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * implement OID_802_3_MULTICAST_LIST oid handling
 *
 * 03 02 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * 1) the use of prPendingOid revised, all accessing are now protected by spin lock
 *  *  * 2) ensure wlanReleasePendingOid will clear all command queues
 *
 * 02 09 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * move ucCmdSeqNum as instance variable
 *
 * 01 27 2010 wh.su
 * [WPD00003816][MT6620 Wi-Fi] Adding the security support
 * .
 *
 * 01 27 2010 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * 1. eliminate improper variable in rHifInfo
 *  *  * 2. block TX/ordinary OID when RF test mode is engaged
 *  *  * 3. wait until firmware finish operation when entering into and leaving from RF test mode
 *  *  * 4. correct some HAL implementation
 *
 * 12 30 2009 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * 1) According to CMD/EVENT documentation v0.8,
 *  *  * OID_CUSTOM_TEST_RX_STATUS & OID_CUSTOM_TEST_TX_STATUS is no longer used,
 *  *  * and result is retrieved by get ATInfo instead
 *  *  * 2) add 4 counter for recording aggregation statistics
 *
 * 12 28 2009 cp.wu
 * [WPD00001943]Create WiFi test driver framework on WinXP
 * eliminate redundant variables for connection_state
**  \main\maintrunk.MT6620WiFiDriver_Prj\13 2009-12-16 18:02:03 GMT mtk02752
**  add external reference to avoid compilation error
**  \main\maintrunk.MT6620WiFiDriver_Prj\12 2009-12-10 16:40:26 GMT mtk02752
**  eliminate unused member
**  \main\maintrunk.MT6620WiFiDriver_Prj\11 2009-12-08 17:36:08 GMT mtk02752
**  add RF test data members into P_ADAPTER_T
**  \main\maintrunk.MT6620WiFiDriver_Prj\10 2009-10-13 21:58:45 GMT mtk01084
**  update for new HW architecture design
**  \main\maintrunk.MT6620WiFiDriver_Prj\9 2009-04-28 10:29:57 GMT mtk01461
**  Add read WTSR for SDIO_STATUS_ENHANCE mode
**  \main\maintrunk.MT6620WiFiDriver_Prj\8 2009-04-21 09:37:35 GMT mtk01461
**  Add prPendingCmdInfoOfOID for temporarily saving the CMD_INFO_T before en-queue to rCmdQueue
**  \main\maintrunk.MT6620WiFiDriver_Prj\7 2009-04-17 19:57:51 GMT mtk01461
**  Add MGMT Buffer Info
**  \main\maintrunk.MT6620WiFiDriver_Prj\6 2009-04-01 10:34:12 GMT mtk01461
**  Add SW pre test CFG_HIF_LOOPBACK_PRETEST
**  \main\maintrunk.MT6620WiFiDriver_Prj\5 2009-03-23 21:41:48 GMT mtk01461
**  Add fgIsWmmAssoc flag for TC assignment
**  \main\maintrunk.MT6620WiFiDriver_Prj\4 2009-03-19 18:32:51 GMT mtk01084
**  update for basic power management functions
**  \main\maintrunk.MT6620WiFiDriver_Prj\3 2009-03-18 20:51:52 GMT mtk01426
**  Add #if CFG_SDIO_RX_ENHANCE related data structure
**  \main\maintrunk.MT6620WiFiDriver_Prj\2 2009-03-10 20:16:17 GMT mtk01426
**  Init for develop
**
*/

#ifndef _ADAPTER_H
#define _ADAPTER_H

/*******************************************************************************
*                         C O M P I L E R   F L A G S
********************************************************************************
*/

/*******************************************************************************
*                    E X T E R N A L   R E F E R E N C E S
********************************************************************************
*/
#if CFG_SUPPORT_HOTSPOT_2_0
#include "hs20.h"
#endif

/*******************************************************************************
*                              C O N S T A N T S
********************************************************************************
*/

/*******************************************************************************
*                             D A T A   T Y P E S
********************************************************************************
*/
typedef struct _ENHANCE_MODE_DATA_STRUCT_T SDIO_CTRL_T, *P_SDIO_CTRL_T;

typedef struct _WLAN_INFO_T {
	PARAM_BSSID_EX_T rCurrBssId;

	/* Scan Result */
	PARAM_BSSID_EX_T arScanResult[CFG_MAX_NUM_BSS_LIST];
	PUINT_8 apucScanResultIEs[CFG_MAX_NUM_BSS_LIST];
	UINT_32 u4ScanResultNum;

	/* IE pool for Scanning Result */
	UINT_8 aucScanIEBuf[CFG_MAX_COMMON_IE_BUF_LEN];
	UINT_32 u4ScanIEBufferUsage;

	OS_SYSTIME u4SysTime;

	/* connection parameter (for Ad-Hoc) */
	UINT_16 u2BeaconPeriod;
	UINT_16 u2AtimWindow;

	PARAM_RATES eDesiredRates;
	CMD_LINK_ATTRIB eLinkAttr;
/* CMD_PS_PROFILE_T         ePowerSaveMode; */
	CMD_PS_PROFILE_T arPowerSaveMode[NETWORK_TYPE_INDEX_NUM];

	/* trigger parameter */
	ENUM_RSSI_TRIGGER_TYPE eRssiTriggerType;
	PARAM_RSSI rRssiTriggerValue;

	/* Privacy Filter */
	ENUM_PARAM_PRIVACY_FILTER_T ePrivacyFilter;

	/* RTS Threshold */
	PARAM_RTS_THRESHOLD eRtsThreshold;

	/* Network Type */
	UINT_8 ucNetworkType;

	/* Network Type In Use */
	UINT_8 ucNetworkTypeInUse;

} WLAN_INFO_T, *P_WLAN_INFO_T;

/* Session for CONNECTION SETTINGS */
typedef struct _CONNECTION_SETTINGS_T {

	UINT_8 aucMacAddress[MAC_ADDR_LEN];

	UINT_8 ucDelayTimeOfDisconnectEvent;

	BOOLEAN fgIsConnByBssidIssued;
	UINT_8 aucBSSID[MAC_ADDR_LEN];

	BOOLEAN fgIsConnReqIssued;
	BOOLEAN fgIsDisconnectedByNonRequest;
	ENUM_RECONNECT_LEVEL_T eReConnectLevel;

	UINT_8 ucSSIDLen;
	UINT_8 aucSSID[ELEM_MAX_LEN_SSID];

	ENUM_PARAM_OP_MODE_T eOPMode;

	ENUM_PARAM_CONNECTION_POLICY_T eConnectionPolicy;

	ENUM_PARAM_AD_HOC_MODE_T eAdHocMode;

	ENUM_PARAM_AUTH_MODE_T eAuthMode;

	ENUM_PARAM_ENCRYPTION_STATUS_T eEncStatus;

	BOOLEAN fgIsScanReqIssued;

	/* MIB attributes */
	UINT_16 u2BeaconPeriod;

	UINT_16 u2RTSThreshold;	/* User desired setting */

	UINT_16 u2DesiredNonHTRateSet;	/* User desired setting */

	UINT_8 ucAdHocChannelNum;	/* For AdHoc */

	ENUM_BAND_T eAdHocBand;	/* For AdHoc */

	UINT_32 u4FreqInKHz;	/* Center frequency */

	/* ATIM windows using for IBSS power saving function */
	UINT_16 u2AtimWindow;

	/* Features */
	BOOLEAN fgIsEnableRoaming;

	BOOLEAN fgIsAdHocQoSEnable;

	ENUM_PARAM_PHY_CONFIG_T eDesiredPhyConfig;

	/* Used for AP mode for desired channel and bandwidth */
	UINT_16 u2CountryCode;
	UINT_16 u2CountryCodeBakup;
	UINT_8 uc2G4BandwidthMode;	/* 20/40M or 20M only */
	UINT_8 uc5GBandwidthMode;	/* 20/40M or 20M only */

	BOOLEAN fgTxShortGIDisabled;
	BOOLEAN fgRxShortGIDisabled;

#if CFG_SUPPORT_802_11D
	BOOLEAN fgMultiDomainCapabilityEnabled;
#endif				/* CFG_SUPPORT_802_11D */

#if 1				/* CFG_SUPPORT_WAPI */
	BOOLEAN fgWapiMode;
	UINT_32 u4WapiSelectedGroupCipher;
	UINT_32 u4WapiSelectedPairwiseCipher;
	UINT_32 u4WapiSelectedAKMSuite;
#endif

	/* CR1486, CR1640 */
	/* for WPS, disable the privacy check for AP selection policy */
	BOOLEAN fgPrivacyCheckDisable;

	/* b0~3: trigger-en AC0~3. b4~7: delivery-en AC0~3 */
	UINT_8 bmfgApsdEnAc;

	/* for RSN info store, when upper layer set rsn info */
	RSN_INFO_T rRsnInfo;

} CONNECTION_SETTINGS_T, *P_CONNECTION_SETTINGS_T;

struct _BSS_INFO_T {

	ENUM_PARAM_MEDIA_STATE_T eConnectionState;	/* Connected Flag used in AIS_NORMAL_TR */
	ENUM_PARAM_MEDIA_STATE_T eConnectionStateIndicated;	/* The Media State that report to HOST */

	ENUM_OP_MODE_T eCurrentOPMode;	/* Current Operation Mode - Infra/IBSS */
#if CFG_ENABLE_WIFI_DIRECT
	ENUM_OP_MODE_T eIntendOPMode;
#endif

	BOOLEAN fgIsNetActive;	/* TRUE if this network has been activated */

	UINT_8 ucNetTypeIndex;	/* ENUM_NETWORK_TYPE_INDEX_T */

	UINT_8 ucReasonOfDisconnect;	/* Used by media state indication */

	UINT_8 ucSSIDLen;	/* Length of SSID */

#if CFG_ENABLE_WIFI_DIRECT
	ENUM_HIDDEN_SSID_TYPE_T eHiddenSsidType;	/* For Hidden SSID usage. */
#endif

	UINT_8 aucSSID[ELEM_MAX_LEN_SSID];	/* SSID used in this BSS */

	UINT_8 aucBSSID[MAC_ADDR_LEN];	/* The BSSID of the associated BSS */

	UINT_8 aucOwnMacAddr[MAC_ADDR_LEN];	/* Owned MAC Address used in this BSS */

	P_STA_RECORD_T prStaRecOfAP;	/* For Infra Mode, and valid only if
					 * eConnectionState == MEDIA_STATE_CONNECTED
					 */
	LINK_T rStaRecOfClientList;	/* For IBSS/AP Mode, all known STAs in current BSS */

	UINT_16 u2CapInfo;	/* Change Detection */

	UINT_16 u2BeaconInterval;	/* The Beacon Interval of this BSS */

	UINT_16 u2ATIMWindow;	/* For IBSS Mode */

	UINT_16 u2AssocId;	/* For Infra Mode, it is the Assoc ID assigned by AP.
				 */

	UINT_8 ucDTIMPeriod;	/* For Infra/AP Mode */

	UINT_8 ucDTIMCount;	/* For AP Mode, it is the DTIM value we should carried in
				 * the Beacon of next TBTT.
				 */

	UINT_8 ucPhyTypeSet;	/* Available PHY Type Set of this peer
				 * (This is deduced from received BSS_DESC_T)
				 */

	UINT_8 ucNonHTBasicPhyType;	/* The Basic PHY Type Index, used to setup Phy Capability */

	UINT_8 ucConfigAdHocAPMode;	/* The configuration of AdHoc/AP Mode. e.g. 11g or 11b */

	UINT_8 ucBeaconTimeoutCount;	/* For Infra/AP Mode, it is a threshold of Beacon Lost Count to
					   confirm connection was lost */

	BOOLEAN fgHoldSameBssidForIBSS;	/* For IBSS Mode, to keep use same BSSID to extend the life cycle of an IBSS */

	BOOLEAN fgIsBeaconActivated;	/* For AP/IBSS Mode, it is used to indicate that Beacon is sending */

	P_MSDU_INFO_T prBeacon;	/* For AP/IBSS Mode - Beacon Frame */

	BOOLEAN fgIsIBSSMaster;	/* For IBSS Mode - To indicate that we can reply ProbeResp Frame.
				   In current TBTT interval */

	BOOLEAN fgIsShortPreambleAllowed;	/* From Capability Info. of AssocResp Frame
						AND of Beacon/ProbeResp Frame */
	BOOLEAN fgUseShortPreamble;	/* Short Preamble is enabled in current BSS. */
	BOOLEAN fgUseShortSlotTime;	/* Short Slot Time is enabled in current BSS. */

	UINT_16 u2OperationalRateSet;	/* Operational Rate Set of current BSS */
	UINT_16 u2BSSBasicRateSet;	/* Basic Rate Set of current BSS */

	UINT_8 ucAllSupportedRatesLen;	/* Used for composing Beacon Frame in AdHoc or AP Mode */
	UINT_8 aucAllSupportedRates[RATE_NUM];

	UINT_8 ucAssocClientCnt;	/* TODO(Kevin): Number of associated clients */

	BOOLEAN fgIsProtection;
	BOOLEAN fgIsQBSS;	/* fgIsWmmBSS; *//* For Infra/AP/IBSS Mode, it is used to indicate if we support WMM in
				 * current BSS. */
	BOOLEAN fgIsNetAbsent;	/* TRUE: BSS is absent, FALSE: BSS is present */

	UINT_32 u4RsnSelectedGroupCipher;
	UINT_32 u4RsnSelectedPairwiseCipher;
	UINT_32 u4RsnSelectedAKMSuite;
	UINT_16 u2RsnSelectedCapInfo;

    /*------------------------------------------------------------------------*/
	/* Power Management related information                                   */
    /*------------------------------------------------------------------------*/
	PM_PROFILE_SETUP_INFO_T rPmProfSetupInfo;

    /*------------------------------------------------------------------------*/
	/* WMM/QoS related information                                            */
    /*------------------------------------------------------------------------*/
	UINT_8 ucWmmParamSetCount;	/* Used to detect the change of EDCA parameters. For AP mode,
					the value is used in WMM IE */

	AC_QUE_PARMS_T arACQueParms[WMM_AC_INDEX_NUM];

	UINT_8 aucCWminLog2ForBcast[WMM_AC_INDEX_NUM];	/* For AP mode, broadcast the CWminLog2 */
	UINT_8 aucCWmaxLog2ForBcast[WMM_AC_INDEX_NUM];	/* For AP mode, broadcast the CWmaxLog2 */
	AC_QUE_PARMS_T arACQueParmsForBcast[WMM_AC_INDEX_NUM];	/* For AP mode, broadcast the value */

    /*------------------------------------------------------------------------*/
	/* 802.11n HT operation IE when (prStaRec->ucPhyTypeSet & PHY_TYPE_BIT_HT) */
	/* is true. They have the same definition with fields of                  */
	/* information element (CM)                                               */
    /*------------------------------------------------------------------------*/
	ENUM_BAND_T eBand;
	UINT_8 ucPrimaryChannel;
	UINT_8 ucHtOpInfo1;
	UINT_16 u2HtOpInfo2;
	UINT_16 u2HtOpInfo3;

    /*------------------------------------------------------------------------*/
	/* Required protection modes (CM)                                         */
    /*------------------------------------------------------------------------*/
	BOOLEAN fgErpProtectMode;
	ENUM_HT_PROTECT_MODE_T eHtProtectMode;
	ENUM_GF_MODE_T eGfOperationMode;
	ENUM_RIFS_MODE_T eRifsOperationMode;

	BOOLEAN fgObssErpProtectMode;	/* GO only */
	ENUM_HT_PROTECT_MODE_T eObssHtProtectMode;	/* GO only */
	ENUM_GF_MODE_T eObssGfOperationMode;	/* GO only */
	BOOLEAN fgObssRifsOperationMode;	/* GO only */

    /*------------------------------------------------------------------------*/
	/* OBSS to decide if 20/40M bandwidth is permitted.                       */
	/* The first member indicates the following channel list length.          */
    /*------------------------------------------------------------------------*/
	BOOLEAN fgAssoc40mBwAllowed;
	BOOLEAN fg40mBwAllowed;
	ENUM_CHNL_EXT_T eBssSCO;	/* Real setting for HW
					 * 20/40M AP mode will always set 40M,
					 * but its OP IE can be changed.
					 */
	UINT_8 auc2G_20mReqChnlList[CHNL_LIST_SZ_2G + 1];
	UINT_8 auc2G_NonHtChnlList[CHNL_LIST_SZ_2G + 1];
	UINT_8 auc2G_PriChnlList[CHNL_LIST_SZ_2G + 1];
	UINT_8 auc2G_SecChnlList[CHNL_LIST_SZ_2G + 1];

	UINT_8 auc5G_20mReqChnlList[CHNL_LIST_SZ_5G + 1];
	UINT_8 auc5G_NonHtChnlList[CHNL_LIST_SZ_5G + 1];
	UINT_8 auc5G_PriChnlList[CHNL_LIST_SZ_5G + 1];
	UINT_8 auc5G_SecChnlList[CHNL_LIST_SZ_5G + 1];

	TIMER_T rObssScanTimer;
	UINT_16 u2ObssScanInterval;	/* in unit of sec */

	BOOLEAN fgObssActionForcedTo20M;	/* GO only */
	BOOLEAN fgObssBeaconForcedTo20M;	/* GO only */

    /*------------------------------------------------------------------------*/
	/* HW Related Fields (Kevin)                                              */
    /*------------------------------------------------------------------------*/
	UINT_8 ucHwDefaultFixedRateCode;	/* The default rate code copied to MAC TX Desc */
	UINT_16 u2HwLPWakeupGuardTimeUsec;

	UINT_8 ucBssFreeQuota;	/* The value is updated from FW  */
#if CFG_ENABLE_GTK_FRAME_FILTER
	P_IPV4_NETWORK_ADDRESS_LIST prIpV4NetAddrList;
#endif
	UINT_16 u2DeauthReason;

#if (CFG_SUPPORT_TDLS == 1)
	BOOLEAN fgTdlsIsProhibited;	/* TRUE: AP prohibits TDLS links */
	BOOLEAN fgTdlsIsChSwProhibited;	/* TRUE: AP prohibits TDLS chan switch */
#endif				/* CFG_SUPPORT_TDLS */
};

struct _AIS_SPECIFIC_BSS_INFO_T {
	UINT_8 ucRoamingAuthTypes;	/* This value indicate the roaming type used in AIS_JOIN */

	BOOLEAN fgIsIBSSActive;

	/*! \brief Global flag to let arbiter stay at standby and not connect to any network */
	BOOLEAN fgCounterMeasure;
	UINT_8 ucWEPDefaultKeyID;
	BOOLEAN fgTransmitKeyExist;	/* Legacy wep Transmit key exist or not */

	/* While Do CounterMeasure procedure, check the EAPoL Error report have send out */
	BOOLEAN fgCheckEAPoLTxDone;

	UINT_32 u4RsnaLastMICFailTime;

	/* Stored the current bss wpa rsn cap filed, used for roaming policy */
	/* UINT_16                 u2RsnCap; */
	TIMER_T rPreauthenticationTimer;

	/* By the flow chart of 802.11i,
	   wait 60 sec before associating to same AP
	   or roaming to a new AP
	   or sending data in IBSS,
	   keep a timer for handle the 60 sec counterMeasure */
	TIMER_T rRsnaBlockTrafficTimer;
	TIMER_T rRsnaEAPoLReportTimeoutTimer;

	/* For Keep the Tx/Rx Mic key for TKIP SW Calculate Mic */
	/* This is only one for AIS/AP */
	UINT_8 aucTxMicKey[8];
	UINT_8 aucRxMicKey[8];

	/* Buffer for WPA2 PMKID */
	/* The PMKID cache lifetime is expire by media_disconnect_indication */
	UINT_32 u4PmkidCandicateCount;
	PMKID_CANDICATE_T arPmkidCandicate[CFG_MAX_PMKID_CACHE];
	UINT_32 u4PmkidCacheCount;
	PMKID_ENTRY_T arPmkidCache[CFG_MAX_PMKID_CACHE];
	BOOLEAN fgIndicatePMKID;
#if CFG_SUPPORT_802_11W
	BOOLEAN fgMgmtProtection;
	UINT_32 u4SaQueryStart;
	UINT_32 u4SaQueryCount;
	UINT_8 ucSaQueryTimedOut;
	PUINT_8 pucSaQueryTransId;
	TIMER_T rSaQueryTimer;
	BOOLEAN fgBipKeyInstalled;
#endif
};

struct _BOW_SPECIFIC_BSS_INFO_T {
	UINT_16 u2Reserved;	/* Reserved for Data Type Check */
};

#if CFG_SLT_SUPPORT
typedef struct _SLT_INFO_T {

	P_BSS_DESC_T prPseudoBssDesc;
	UINT_16 u2SiteID;
	UINT_8 ucChannel2G4;
	UINT_8 ucChannel5G;
	BOOLEAN fgIsDUT;
	UINT_32 u4BeaconReceiveCnt;
	/* ///////Deprecated///////// */
	P_STA_RECORD_T prPseudoStaRec;
} SLT_INFO_T, *P_SLT_INFO_T;
#endif

/* Major member variables for WiFi FW operation.
   Variables within this region will be ready for access after WIFI function is enabled.
*/
typedef struct _WIFI_VAR_T {
	BOOLEAN fgIsRadioOff;

	BOOLEAN fgIsEnterD3ReqIssued;

	BOOLEAN fgDebugCmdResp;

	CONNECTION_SETTINGS_T rConnSettings;

	SCAN_INFO_T rScanInfo;

#if CFG_SUPPORT_ROAMING
	ROAMING_INFO_T rRoamingInfo;
#endif				/* CFG_SUPPORT_ROAMING */

	AIS_FSM_INFO_T rAisFsmInfo;

	ENUM_PWR_STATE_T aePwrState[NETWORK_TYPE_INDEX_NUM];

	BSS_INFO_T arBssInfo[NETWORK_TYPE_INDEX_NUM];

	AIS_SPECIFIC_BSS_INFO_T rAisSpecificBssInfo;

#if CFG_ENABLE_WIFI_DIRECT
	P_P2P_CONNECTION_SETTINGS_T prP2PConnSettings;

	P_P2P_SPECIFIC_BSS_INFO_T prP2pSpecificBssInfo;

	P_P2P_FSM_INFO_T prP2pFsmInfo;
#endif				/* CFG_ENABLE_WIFI_DIRECT */

#if CFG_ENABLE_BT_OVER_WIFI
	BOW_SPECIFIC_BSS_INFO_T rBowSpecificBssInfo;
	BOW_FSM_INFO_T rBowFsmInfo;
#endif				/* CFG_ENABLE_BT_OVER_WIFI */

	DEAUTH_INFO_T arDeauthInfo[MAX_DEAUTH_INFO_COUNT];

	/* Current Wi-Fi Settings and Flags */
	UINT_8 aucPermanentAddress[MAC_ADDR_LEN];
	UINT_8 aucMacAddress[MAC_ADDR_LEN];
	UINT_8 aucDeviceAddress[MAC_ADDR_LEN];
	UINT_8 aucInterfaceAddress[MAC_ADDR_LEN];

	UINT_8 ucAvailablePhyTypeSet;

	ENUM_PHY_TYPE_INDEX_T eNonHTBasicPhyType2G4;	/* Basic Phy Type used by SCN according
							 * to the set of Available PHY Types
							 */

	ENUM_PARAM_PREAMBLE_TYPE_T ePreambleType;
	ENUM_REGISTRY_FIXED_RATE_T eRateSetting;

	BOOLEAN fgIsShortSlotTimeOptionEnable;
	/* User desired setting, but will honor the capability of AP */

	BOOLEAN fgEnableJoinToHiddenSSID;
	BOOLEAN fgSupportWZCDisassociation;

	BOOLEAN fgSupportQoS;
	BOOLEAN fgSupportAmpduTx;
	BOOLEAN fgSupportAmpduRx;
	BOOLEAN fgSupportTspec;
	BOOLEAN fgSupportUAPSD;
	BOOLEAN fgSupportULPSMP;
	UINT_8 u8SupportRxSgi20;	/* 0: default 1: enable 2:disble */
	UINT_8 u8SupportRxSgi40;
	UINT_8 u8SupportRxGf;
	UINT_8 u8SupportRxSTBC;
#if CFG_SUPPORT_CFG_FILE
	UINT_8 ucApWpsMode;
	UINT_8 ucCert11nMode;
#endif
#if CFG_SUPPORT_CE_FCC_TXPWR_LIMIT
	UINT_8 ucCeFccTxPwrLimit;
	UINT_8 ucCeFccTxPwrLimitCck;
	UINT_8 ucCeFccTxPwrLimitOfdmHt20;
	UINT_8 ucCeFccTxPwrLimitHt40;
#endif

#if CFG_SLT_SUPPORT
	SLT_INFO_T rSltInfo;
#endif

#if CFG_SUPPORT_HOTSPOT_2_0
	HS20_INFO_T rHS20Info;
#endif
#if CFG_AUTO_CHANNEL_SEL_SUPPORT
	PARAM_GET_CHN_LOAD rChnLoadInfo;
#endif

} WIFI_VAR_T, *P_WIFI_VAR_T;	/* end of _WIFI_VAR_T */

/* cnm_timer module */
typedef struct {
	LINK_T rLinkHead;
	OS_SYSTIME rNextExpiredSysTime;
	KAL_WAKE_LOCK_T rWakeLock;
	BOOLEAN fgWakeLocked;
} ROOT_TIMER, *P_ROOT_TIMER;

/* FW/DRV/NVRAM version information */
typedef struct {

	/* NVRAM or Registry */
	UINT_16 u2Part1CfgOwnVersion;
	UINT_16 u2Part1CfgPeerVersion;
	UINT_16 u2Part2CfgOwnVersion;
	UINT_16 u2Part2CfgPeerVersion;

	/* Firmware */
	UINT_16 u2FwProductID;
	UINT_16 u2FwOwnVersion;
	UINT_16 u2FwPeerVersion;

} WIFI_VER_INFO_T, *P_WIFI_VER_INFO_T;

#if CFG_ENABLE_WIFI_DIRECT
/*
* p2p function pointer structure
*/

typedef struct _P2P_FUNCTION_LINKER {
	P2P_REMOVE prP2pRemove;
/* NIC_P2P_MEDIA_STATE_CHANGE                  prNicP2pMediaStateChange; */
/* SCAN_UPDATE_P2P_DEVICE_DESC                 prScanUpdateP2pDeviceDesc; */
/* P2P_FSM_RUN_EVENT_RX_PROBE_RESPONSE_FRAME   prP2pFsmRunEventRxProbeResponseFrame; */
	P2P_GENERATE_P2P_IE prP2pGenerateWSC_IEForBeacon;
/* P2P_CALCULATE_WSC_IE_LEN_FOR_PROBE_RSP      prP2pCalculateWSC_IELenForProbeRsp; */
/* P2P_GENERATE_WSC_IE_FOR_PROBE_RSP           prP2pGenerateWSC_IEForProbeRsp; */
/* SCAN_REMOVE_P2P_BSS_DESC                    prScanRemoveP2pBssDesc; */
/* P2P_HANDLE_SEC_CHECK_RSP                    prP2pHandleSecCheckRsp; */
	P2P_NET_REGISTER prP2pNetRegister;
	P2P_NET_UNREGISTER prP2pNetUnregister;
	P2P_CALCULATE_P2P_IE_LEN prP2pCalculateP2p_IELenForAssocReq;	/* All IEs generated from supplicant. */
	P2P_GENERATE_P2P_IE prP2pGenerateP2p_IEForAssocReq;	/* All IEs generated from supplicant. */
} P2P_FUNCTION_LINKER, *P_P2P_FUNCTION_LINKER;

#endif

/*
 * State Machine:
 * --> STOP: No Tx/Rx traffic
 * -----> clear RUNNING
 * --> DISABLE: Screen is off
 * --> ENABLE: Screen is on && Tx/Rx traffic is active
 * -----> clear DISABLE
 * --> RUNNING: Screen was on && Tx/Rx was ongoing
 */
struct PERF_MONITOR_T {
	TIMER_T rPerfMonTimer;
	ULONG ulPerfMonFlag;
	ULONG ulLastTxBytes;
	ULONG ulLastRxBytes;
	ULONG ulP2PLastTxBytes;
	ULONG ulP2PLastRxBytes;
	ULONG ulThroughput; /*in bps*/
	UINT32 u4UpdatePeriod; /*in ms*/
	UINT32 u4TarPerfLevel;
	UINT32 u4CurrPerfLevel;
};

/*
 * Major ADAPTER structure
 * Major data structure for driver operation
 */
struct _ADAPTER_T {
	UINT_8 ucRevID;

	UINT_16 u2NicOpChnlNum;

	BOOLEAN fgIsEnableWMM;
	BOOLEAN fgIsWmmAssoc;	/* This flag is used to indicate that WMM is enable in current BSS */

	UINT_32 u4OsPacketFilter;	/* packet filter used by OS */

#if CFG_TCP_IP_CHKSUM_OFFLOAD
	UINT_32 u4CSUMFlags;
#endif				/* CFG_TCP_IP_CHKSUM_OFFLOAD */

	ENUM_BAND_T aePreferBand[NETWORK_TYPE_INDEX_NUM];

	/* ADAPTER flags */
	UINT_32 u4Flags;
	UINT_32 u4HwFlags;

	BOOLEAN fgIsRadioOff;

	BOOLEAN fgIsEnterD3ReqIssued;

	UINT_8 aucMacAddress[MAC_ADDR_LEN];

	ENUM_PHY_TYPE_INDEX_T eCurrentPhyType;	/* Current selection basing on the set of Available PHY Types */

#if CFG_COALESCING_BUFFER_SIZE || CFG_SDIO_RX_AGG
	UINT_32 u4CoalescingBufCachedSize;
	PUINT_8 pucCoalescingBufCached;
#endif				/* CFG_COALESCING_BUFFER_SIZE */

	/* Buffer for CMD_INFO_T, Mgt packet and mailbox message */
	BUF_INFO_T rMgtBufInfo;
	BUF_INFO_T rMsgBufInfo;
	PUINT_8 pucMgtBufCached;
	UINT_32 u4MgtBufCachedSize;
	UINT_8 aucMsgBuf[MSG_BUFFER_SIZE];
#if CFG_DBG_MGT_BUF
	UINT_32 u4MemAllocDynamicCount;	/* Debug only */
	UINT_32 u4MemFreeDynamicCount;	/* Debug only */
#endif

	STA_RECORD_T arStaRec[CFG_STA_REC_NUM];

	/* Element for TX PATH */
	TX_CTRL_T rTxCtrl;
	QUE_T rFreeCmdList;
	CMD_INFO_T arHifCmdDesc[CFG_TX_MAX_CMD_PKT_NUM];

	/* Element for RX PATH */
	RX_CTRL_T rRxCtrl;

	P_SDIO_CTRL_T prSDIOCtrl;

#if (MT6620_E1_ASIC_HIFSYS_WORKAROUND == 1)
	/* Element for MT6620 E1 HIFSYS workaround */
	BOOLEAN fgIsClockGatingEnabled;
#endif

	/* Buffer for Authentication Event */
	/* <Todo> Move to glue layer and refine the kal function */
	/* Reference to rsnGeneratePmkidIndication function at rsn.c */
	UINT_8 aucIndicationEventBuffer[(CFG_MAX_PMKID_CACHE * 20) + 8];

	UINT_32 u4IntStatus;

	ENUM_ACPI_STATE_T rAcpiState;

	BOOLEAN fgIsIntEnable;
	BOOLEAN fgIsIntEnableWithLPOwnSet;

	BOOLEAN fgIsFwOwn;
	BOOLEAN fgWiFiInSleepyState;

	UINT_32 u4PwrCtrlBlockCnt;

	QUE_T rPendingCmdQueue;

	P_GLUE_INFO_T prGlueInfo;

	UINT_8 ucCmdSeqNum;
	UINT_8 ucTxSeqNum;

#if 1				/* CFG_SUPPORT_WAPI */
	BOOLEAN fgUseWapi;
#endif

	/* RF Test flags */
	BOOLEAN fgTestMode;

	/* WLAN Info for DRIVER_CORE OID query */
	WLAN_INFO_T rWlanInfo;

#if CFG_ENABLE_WIFI_DIRECT
	BOOLEAN fgIsP2PRegistered;
	ENUM_NET_REG_STATE_T rP2PNetRegState;
	BOOLEAN fgIsWlanLaunched;
	P_P2P_INFO_T prP2pInfo;
#if CFG_SUPPORT_P2P_RSSI_QUERY
	OS_SYSTIME rP2pLinkQualityUpdateTime;
	BOOLEAN fgIsP2pLinkQualityValid;
	EVENT_LINK_QUALITY rP2pLinkQuality;
#endif

	/* FSM Timer */
	TIMER_T rP2pFsmTimeoutTimer;
#endif

	/* Online Scan Option */
	BOOLEAN fgEnOnlineScan;

	/* Online Scan Option */
	BOOLEAN fgDisBcnLostDetection;

	/* MAC address */
	PARAM_MAC_ADDRESS rMyMacAddr;

	/* Wake-up Event for WOL */
	UINT_32 u4WakeupEventEnable;

	/* Event Buffering */
	EVENT_STATISTICS rStatStruct;
	OS_SYSTIME rStatUpdateTime;
	BOOLEAN fgIsStatValid;

	EVENT_LINK_QUALITY rLinkQuality;
	OS_SYSTIME rLinkQualityUpdateTime;
	BOOLEAN fgIsLinkQualityValid;
	OS_SYSTIME rLinkRateUpdateTime;
	BOOLEAN fgIsLinkRateValid;

	/* WIFI_VAR_T */
	WIFI_VAR_T rWifiVar;

	/* MTK WLAN NIC driver IEEE 802.11 MIB */
	IEEE_802_11_MIB_T rMib;

	/* Mailboxs for inter-module communication */
	MBOX_T arMbox[MBOX_ID_TOTAL_NUM];

	/* Timers for OID Pending Handling */
	TIMER_T rOidTimeoutTimer;

	TIMER_T rReturnIndicatedRfbListTimer;

	/* Root Timer for cnm_timer module */
	ROOT_TIMER rRootTimer;

	/* RLM maintenance */
	ENUM_CHNL_EXT_T eRfSco;
	ENUM_SYS_PROTECT_MODE_T eSysProtectMode;
	ENUM_GF_MODE_T eSysHtGfMode;
	ENUM_RIFS_MODE_T eSysTxRifsMode;
	ENUM_SYS_PCO_PHASE_T eSysPcoPhase;

	P_DOMAIN_INFO_ENTRY prDomainInfo;

	/* QM */
	QUE_MGT_T rQM;

	CNM_INFO_T rCnmInfo;

	UINT_32 u4PowerMode;

	UINT_32 u4CtiaPowerMode;
	BOOLEAN fgEnCtiaPowerMode;

	UINT_32 fgEnArpFilter;

	UINT_32 u4UapsdAcBmp;

	UINT_32 u4MaxSpLen;

	UINT_32 u4PsCurrentMeasureEn;

	/* Version Information */
	WIFI_VER_INFO_T rVerInfo;

	/* 5GHz support (from F/W) */
	BOOLEAN fgIsHw5GBandDisabled;
	BOOLEAN fgEnable5GBand;
	BOOLEAN fgIsEepromUsed;
	BOOLEAN fgIsEfuseValid;
	BOOLEAN fgIsEmbbededMacAddrValid;

#if CFG_SUPPORT_PWR_LIMIT_COUNTRY
	BOOLEAN fgIsPowerLimitTableValid;
#endif

	/* Packet Forwarding Tracking */
	INT_32 i4PendingFwdFrameCount;

#if CFG_SUPPORT_RDD_TEST_MODE
	UINT_8 ucRddStatus;
#endif

	BOOLEAN fgDisStaAgingTimeoutDetection;
#if CFG_SUPPORT_CFG_FILE
	P_WLAN_CFG_T prWlanCfg;
	WLAN_CFG_T rWlanCfg;
#endif
#if CFG_SPM_WORKAROUND_FOR_HOTSPOT
	KAL_WAKE_LOCK_T rApWakeLock;
#endif
	UINT_32 u4FwCompileFlag0;
	UINT_32 u4FwCompileFlag1;
	KAL_WAKE_LOCK_T rTxThreadWakeLock;
	KAL_WAKE_LOCK_T rAhbIsrWakeLock;

#if CFG_SUPPORT_ROAMING_ENC
	BOOLEAN fgIsRoamingEncEnabled;
#endif				/* CFG_SUPPORT_ROAMING_ENC */

#if (CFG_SUPPORT_TDLS == 1)
	BOOLEAN fgTdlsIsSup;
#endif				/* CFG_SUPPORT_TDLS */

	UINT_8 ucScanTime;

#if CFG_SUPPORT_DBG_POWERMODE
	BOOLEAN fgEnDbgPowerMode;	/*  dbg privilege power mode, always keep in active */
#endif

	UINT_32 u4AirDelayTotal;	/*  dbg privilege power mode, always keep in active */
	ULONG	ulSuspendFlag;
	struct PERF_MONITOR_T rPerMonitor;
};				/* end of _ADAPTER_T */

/*******************************************************************************
*                            P U B L I C   D A T A
********************************************************************************
*/

/*******************************************************************************
*                           P R I V A T E   D A T A
********************************************************************************
*/

/*******************************************************************************
*                                 M A C R O S
********************************************************************************
*/
#define SUSPEND_FLAG_FOR_WAKEUP_REASON	(0)
#define SUSPEND_FLAG_CLEAR_WHEN_RESUME	(1)

/*----------------------------------------------------------------------------*/
/* Macros for BSS_INFO_T - Flag of Net Active                                 */
/*----------------------------------------------------------------------------*/
#define IS_NET_ACTIVE(_prAdapter, _NetTypeIndex) \
		(_prAdapter->rWifiVar.arBssInfo[(_NetTypeIndex)].fgIsNetActive)
#define IS_BSS_ACTIVE(_prBssInfo)     ((_prBssInfo)->fgIsNetActive)

#define IS_AIS_ACTIVE(_prAdapter)     IS_NET_ACTIVE(_prAdapter, NETWORK_TYPE_AIS_INDEX)
#define IS_P2P_ACTIVE(_prAdapter)     IS_NET_ACTIVE(_prAdapter, NETWORK_TYPE_P2P_INDEX)
#define IS_BOW_ACTIVE(_prAdapter)     IS_NET_ACTIVE(_prAdapter, NETWORK_TYPE_BOW_INDEX)

#define SET_NET_ACTIVE(_prAdapter, _NetTypeIndex) \
	{_prAdapter->rWifiVar.arBssInfo[(_NetTypeIndex)].fgIsNetActive = TRUE; }

#define UNSET_NET_ACTIVE(_prAdapter, _NetTypeIndex) \
	{_prAdapter->rWifiVar.arBssInfo[(_NetTypeIndex)].fgIsNetActive = FALSE; }

#define BSS_INFO_INIT(_prAdapter, _NetTypeIndex) \
		{   UINT_8 _aucZeroMacAddr[] = NULL_MAC_ADDR; \
		    P_BSS_INFO_T _prBssInfo = &(_prAdapter->rWifiVar.arBssInfo[(_NetTypeIndex)]); \
		    \
		    _prBssInfo->eConnectionState = PARAM_MEDIA_STATE_DISCONNECTED; \
		    _prBssInfo->eConnectionStateIndicated = PARAM_MEDIA_STATE_DISCONNECTED; \
		    _prBssInfo->eCurrentOPMode = OP_MODE_INFRASTRUCTURE; \
		    _prBssInfo->fgIsNetActive = FALSE; \
		    _prBssInfo->ucNetTypeIndex = (_NetTypeIndex); \
		    _prBssInfo->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_RESERVED; \
		    COPY_MAC_ADDR(_prBssInfo->aucBSSID, _aucZeroMacAddr); \
		    LINK_INITIALIZE(&_prBssInfo->rStaRecOfClientList); \
		    _prBssInfo->fgIsBeaconActivated = FALSE; \
		    _prBssInfo->ucHwDefaultFixedRateCode = RATE_CCK_1M_LONG; \
		    _prBssInfo->fgIsNetAbsent = FALSE; \
		}

#if CFG_ENABLE_BT_OVER_WIFI
#define BOW_BSS_INFO_INIT(_prAdapter, _NetTypeIndex) \
		{  \
		    P_BSS_INFO_T _prBssInfo = &(_prAdapter->rWifiVar.arBssInfo[(_NetTypeIndex)]); \
		    \
		    _prBssInfo->eConnectionState = PARAM_MEDIA_STATE_DISCONNECTED; \
		    _prBssInfo->eConnectionStateIndicated = PARAM_MEDIA_STATE_DISCONNECTED; \
		    _prBssInfo->eCurrentOPMode = OP_MODE_BOW; \
		    _prBssInfo->ucNetTypeIndex = (_NetTypeIndex); \
		    _prBssInfo->ucReasonOfDisconnect = DISCONNECT_REASON_CODE_RESERVED; \
		    LINK_INITIALIZE(&_prBssInfo->rStaRecOfClientList); \
		    _prBssInfo->fgIsBeaconActivated = TRUE; \
		    _prBssInfo->ucHwDefaultFixedRateCode = RATE_CCK_1M_LONG; \
		    _prBssInfo->fgIsNetAbsent = FALSE; \
		}
#endif

#define PERF_MON_DISABLE_BIT    (0)
#define PERF_MON_STOP_BIT       (1)
#define PERF_MON_RUNNING_BIT    (2)

#define THROUGHPUT_L1_THRESHOLD		(20*1024*1024)
#define THROUGHPUT_L2_THRESHOLD		(60*1024*1024)
#define THROUGHPUT_L3_THRESHOLD		(135*1024*1024)

/*----------------------------------------------------------------------------*/
/* Macros for Power State                                                     */
/*----------------------------------------------------------------------------*/
#define SET_NET_PWR_STATE_IDLE(_prAdapter, _NetTypeIndex) \
	{_prAdapter->rWifiVar.aePwrState[(_NetTypeIndex)] = PWR_STATE_IDLE; }

#define SET_NET_PWR_STATE_ACTIVE(_prAdapter, _NetTypeIndex) \
	{_prAdapter->rWifiVar.aePwrState[(_NetTypeIndex)] = PWR_STATE_ACTIVE; }

#define SET_NET_PWR_STATE_PS(_prAdapter, _NetTypeIndex) \
	{_prAdapter->rWifiVar.aePwrState[(_NetTypeIndex)] = PWR_STATE_PS; }

#define IS_NET_PWR_STATE_ACTIVE(_prAdapter, _NetTypeIndex) \
	(_prAdapter->rWifiVar.aePwrState[(_NetTypeIndex)] == PWR_STATE_ACTIVE)

#define IS_NET_PWR_STATE_IDLE(_prAdapter, _NetTypeIndex) \
	(_prAdapter->rWifiVar.aePwrState[(_NetTypeIndex)] == PWR_STATE_IDLE)

#define IS_SCN_PWR_STATE_ACTIVE(_prAdapter) \
	(_prAdapter->rWifiVar.rScanInfo.eScanPwrState == SCAN_PWR_STATE_ACTIVE)

#define IS_SCN_PWR_STATE_IDLE(_prAdapter) \
	(_prAdapter->rWifiVar.rScanInfo.eScanPwrState == SCAN_PWR_STATE_IDLE)

/*******************************************************************************
*                  F U N C T I O N   D E C L A R A T I O N S
********************************************************************************
*/

/*******************************************************************************
*                              F U N C T I O N S
********************************************************************************
*/

#endif /* _ADAPTER_H */