| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 3bd32722c827d00eafe8e6d5b83e9f3148ea7c7e upstream.
On some QNAP NAS devices the rtc can wake the machine. Several people
noticed that once the machine was woken this way it fails to shut down.
That's because the driver fails to acknowledge the interrupt and so it
keeps active and restarts the machine immediatly after shutdown. See
https://bugs.debian.org/794266 for a bug report.
Doing this correctly requires to interpret the INT2 flag of the first read
of the STATUS1 register because this bit is cleared by read.
Note this is not maximally robust though because a pending irq isn't
detected when the STATUS1 register was already read (and so INT2 is not
set) but the irq was not disabled. But that is a hardware imposed problem
that cannot easily be fixed by software.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 8e6583f1b5d1f5f129b873f1428b7e414263d847 upstream.
There were two deviations from the reference manual: you have to wait
half a second when POC is active and you might have to repeat
initialization when POC or BLD are still set after the sequence.
Note however that as POC and BLD are cleared by read the driver might
not be able to detect that a reset is necessary. I don't have a good
idea how to fix this.
Additionally report the value read from STATUS1 to the caller. This
prepares the next patch.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit ac4d4f65bbcba478309de36929016d2618421ba1 upstream.
The rtc core calls the .read_alarm with all fields initialized to 0. As
the s35390a driver doesn't touch some fields the returned date is
interpreted as a date in January 1900. So make sure all fields are set
to -1; some of them are then overwritten with the right data depending
on the hardware state.
In mainline this is done by commit d68778b80dd7 ("rtc: initialize output
parameter for read alarm to "uninitialized"") in the core. This is
considered to dangerous for stable as it might have side effects for
other rtc drivers that might for example rely on alarm->time.tm_sec
being initialized to 0.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
|
| |
|
