aboutsummaryrefslogtreecommitdiff
path: root/drivers/block/zram/zram_drv.c
Commit message (Collapse)AuthorAgeFilesLines
* zram: do not use copy_page with non-page aligned addressMinchan Kim2017-10-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d72e9a7a93e4f8e9e52491921d99e0c8aa89eb4e upstream. The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Change-Id: I22e122640cee66282afda3ecb18e3312637eafba Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* zram: restrict add/remove attributes to root onlySergey Senozhatsky2017-09-251-1/+7
| | | | | | | | | | | | | | | | | | | zram hot_add sysfs attribute is a very 'special' attribute - reading from it creates a new uninitialized zram device. This file, by a mistake, can be read by a 'normal' user at the moment, while only root must be able to create a new zram device, therefore hot_add attribute must have S_IRUSR mode, not S_IRUGO. [akpm@linux-foundation.org: s/sence/sense/, reflow comment to use 80 cols] Fixes: 6566d1a32bf72 ("zram: add dynamic device add/remove functionality") Link: http://lkml.kernel.org/r/20161205155845.20129-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Steven Allen <steven@stebalien.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: fix unbalanced idr management at hot removalTakashi Iwai2017-09-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The zram hot removal code calls idr_remove() even when zram_remove() returns an error (typically -EBUSY). This results in a leftover at the device release, eventually leading to a crash when the module is reloaded. As described in the bug report below, the following procedure would cause an Oops with zram: - provision three zram devices via modprobe zram num_devices=3 - configure a size for each device + echo "1G" > /sys/block/$zram_name/disksize - mkfs and mount zram0 only - attempt to hot remove all three devices + echo 2 > /sys/class/zram-control/hot_remove + echo 1 > /sys/class/zram-control/hot_remove + echo 0 > /sys/class/zram-control/hot_remove - zram0 removal fails with EBUSY, as expected - unmount zram0 - try zram0 hot remove again + echo 0 > /sys/class/zram-control/hot_remove - fails with ENODEV (unexpected) - unload zram kernel module + completes successfully - zram0 device node still exists - attempt to mount /dev/zram0 + mount command is killed + following BUG is encountered BUG: unable to handle kernel paging request at ffffffffa0002ba0 IP: get_disk+0x16/0x50 Oops: 0000 [#1] SMP CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176 Call Trace: exact_lock+0xc/0x20 kobj_lookup+0xdc/0x160 get_gendisk+0x2f/0x110 __blkdev_get+0x10c/0x3c0 blkdev_get+0x19d/0x2e0 blkdev_open+0x56/0x70 do_dentry_open.isra.19+0x1ff/0x310 vfs_open+0x43/0x60 path_openat+0x2c9/0xf30 do_filp_open+0x79/0xd0 do_sys_open+0x114/0x1e0 SyS_open+0x19/0x20 entry_SYSCALL_64_fastpath+0x13/0x94 This patch adds the proper error check in hot_remove_store() not to call idr_remove() unconditionally. Fixes: 17ec4cd98578 ("zram: don't call idr_remove() from zram_remove()") Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970 Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: David Disseldorp <ddiss@suse.de> Reported-by: David Disseldorp <ddiss@suse.de> Tested-by: David Disseldorp <ddiss@suse.de> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: our old kernel lacks __GFP_KSWAPD_RECLAIMSultan Qasim Khan2017-09-251-1/+0
| | | | | We'll have to make do without the granular specification of how reclaim should be handled.
* zram: use crypto api to check alg availabilitySergey Senozhatsky2017-09-251-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no way to get a string with all the crypto comp algorithms supported by the crypto comp engine, so we need to maintain our own backends list. At the same time we additionally need to use crypto_has_comp() to make sure that the user has requested a compression algorithm that is recognized by the crypto comp engine. Relying on /proc/crypto is not an options here, because it does not show not-yet-inserted compression modules. Example: modprobe zram cat /proc/crypto | grep -i lz4 modprobe lz4 cat /proc/crypto | grep -i lz4 name : lz4 driver : lz4-generic module : lz4 So the user can't tell exactly if the lz4 is really supported from /proc/crypto output, unless someone or something has loaded it. This patch also adds crypto_has_comp() to zcomp_available_show(). We store all the compression algorithms names in zcomp's `backends' array, regardless the CONFIG_CRYPTO_FOO configuration, but show only those that are also supported by crypto engine. This helps user to know the exact list of compression algorithms that can be used. Example: module lz4 is not loaded yet, but is supported by the crypto engine. /proc/crypto has no information on this module, while zram's `comp_algorithm' lists it: cat /proc/crypto | grep -i lz4 cat /sys/block/zram0/comp_algorithm [lzo] lz4 deflate lz4hc 842 We still use the `backends' array to determine if the requested compression backend is known to crypto api. This array, however, may not contain some entries, therefore as the last step we call crypto_has_comp() function which attempts to insmod the requested compression algorithm to determine if crypto api supports it. The advantage of this method is that now we permit the usage of out-of-tree crypto compression modules (implementing S/W or H/W compression). [sergey.senozhatsky@gmail.com: zram-use-crypto-api-to-check-alg-availability-v3] Link: http://lkml.kernel.org/r/20160604024902.11778-4-sergey.senozhatsky@gmail.com Link: http://lkml.kernel.org/r/20160531122017.2878-5-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: switch to crypto compress APISergey Senozhatsky2017-09-251-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't have an idle zstreams list anymore and our write path now works absolutely differently, preventing preemption during compression. This removes possibilities of read paths preempting writes at wrong places (which could badly affect the performance of both paths) and at the same time opens the door for a move from custom LZO/LZ4 compression backends implementation to a more generic one, using crypto compress API. Joonsoo Kim [1] attempted to do this a while ago, but faced with the need of introducing a new crypto API interface. The root cause was the fact that crypto API compression algorithms require a compression stream structure (in zram terminology) for both compression and decompression ops, while in reality only several of compression algorithms really need it. This resulted in a concept of context-less crypto API compression backends [2]. Both write and read paths, though, would have been executed with the preemption enabled, which in the worst case could have resulted in a decreased worst-case performance, e.g. consider the following case: CPU0 zram_write() spin_lock() take the last idle stream spin_unlock() << preempted >> zram_read() spin_lock() no idle streams spin_unlock() schedule() resuming zram_write compression() but it took me some time to realize that, and it took even longer to evolve zram and to make it ready for crypto API. The key turned out to be -- drop the idle streams list entirely. Without the idle streams list we are free to use compression algorithms that require compression stream for decompression (read), because streams are now placed in per-cpu data and each write path has to disable preemption for compression op, almost completely eliminating the aforementioned case (technically, we still have a small chance, because write path has a fast and a slow paths and the slow path is executed with the preemption enabled; but the frequency of failed fast path is too low). TEST ==== - 4 CPUs, x86_64 system - 3G zram, lzo - fio tests: read, randread, write, randwrite, rw, randrw test script [3] command: ZRAM_SIZE=3G LOG_SUFFIX=XXXX FIO_LOOPS=5 ./zram-fio-test.sh BASE PATCHED jobs1 READ: 2527.2MB/s 2482.7MB/s READ: 2102.7MB/s 2045.0MB/s WRITE: 1284.3MB/s 1324.3MB/s WRITE: 1080.7MB/s 1101.9MB/s READ: 430125KB/s 437498KB/s WRITE: 430538KB/s 437919KB/s READ: 399593KB/s 403987KB/s WRITE: 399910KB/s 404308KB/s jobs2 READ: 8133.5MB/s 7854.8MB/s READ: 7086.6MB/s 6912.8MB/s WRITE: 3177.2MB/s 3298.3MB/s WRITE: 2810.2MB/s 2871.4MB/s READ: 1017.6MB/s 1023.4MB/s WRITE: 1018.2MB/s 1023.1MB/s READ: 977836KB/s 984205KB/s WRITE: 979435KB/s 985814KB/s jobs3 READ: 13557MB/s 13391MB/s READ: 11876MB/s 11752MB/s WRITE: 4641.5MB/s 4682.1MB/s WRITE: 4164.9MB/s 4179.3MB/s READ: 1453.8MB/s 1455.1MB/s WRITE: 1455.1MB/s 1458.2MB/s READ: 1387.7MB/s 1395.7MB/s WRITE: 1386.1MB/s 1394.9MB/s jobs4 READ: 20271MB/s 20078MB/s READ: 18033MB/s 17928MB/s WRITE: 6176.8MB/s 6180.5MB/s WRITE: 5686.3MB/s 5705.3MB/s READ: 2009.4MB/s 2006.7MB/s WRITE: 2007.5MB/s 2004.9MB/s READ: 1929.7MB/s 1935.6MB/s WRITE: 1926.8MB/s 1932.6MB/s jobs5 READ: 18823MB/s 19024MB/s READ: 18968MB/s 19071MB/s WRITE: 6191.6MB/s 6372.1MB/s WRITE: 5818.7MB/s 5787.1MB/s READ: 2011.7MB/s 1981.3MB/s WRITE: 2011.4MB/s 1980.1MB/s READ: 1949.3MB/s 1935.7MB/s WRITE: 1940.4MB/s 1926.1MB/s jobs6 READ: 21870MB/s 21715MB/s READ: 19957MB/s 19879MB/s WRITE: 6528.4MB/s 6537.6MB/s WRITE: 6098.9MB/s 6073.6MB/s READ: 2048.6MB/s 2049.9MB/s WRITE: 2041.7MB/s 2042.9MB/s READ: 2013.4MB/s 1990.4MB/s WRITE: 2009.4MB/s 1986.5MB/s jobs7 READ: 21359MB/s 21124MB/s READ: 19746MB/s 19293MB/s WRITE: 6660.4MB/s 6518.8MB/s WRITE: 6211.6MB/s 6193.1MB/s READ: 2089.7MB/s 2080.6MB/s WRITE: 2085.8MB/s 2076.5MB/s READ: 2041.2MB/s 2052.5MB/s WRITE: 2037.5MB/s 2048.8MB/s jobs8 READ: 20477MB/s 19974MB/s READ: 18922MB/s 18576MB/s WRITE: 6851.9MB/s 6788.3MB/s WRITE: 6407.7MB/s 6347.5MB/s READ: 2134.8MB/s 2136.1MB/s WRITE: 2132.8MB/s 2134.4MB/s READ: 2074.2MB/s 2069.6MB/s WRITE: 2087.3MB/s 2082.4MB/s jobs9 READ: 19797MB/s 19994MB/s READ: 18806MB/s 18581MB/s WRITE: 6878.7MB/s 6822.7MB/s WRITE: 6456.8MB/s 6447.2MB/s READ: 2141.1MB/s 2154.7MB/s WRITE: 2144.4MB/s 2157.3MB/s READ: 2084.1MB/s 2085.1MB/s WRITE: 2091.5MB/s 2092.5MB/s jobs10 READ: 19794MB/s 19784MB/s READ: 18794MB/s 18745MB/s WRITE: 6984.4MB/s 6676.3MB/s WRITE: 6532.3MB/s 6342.7MB/s READ: 2150.6MB/s 2155.4MB/s WRITE: 2156.8MB/s 2161.5MB/s READ: 2106.4MB/s 2095.6MB/s WRITE: 2109.7MB/s 2098.4MB/s BASE PATCHED jobs1 perfstat stalled-cycles-frontend 102,480,595,419 ( 41.53%) 114,508,864,804 ( 46.92%) stalled-cycles-backend 51,941,417,832 ( 21.05%) 46,836,112,388 ( 19.19%) instructions 283,612,054,215 ( 1.15) 283,918,134,959 ( 1.16) branches 56,372,560,385 ( 724.923) 56,449,814,753 ( 733.766) branch-misses 374,826,000 ( 0.66%) 326,935,859 ( 0.58%) jobs2 perfstat stalled-cycles-frontend 155,142,745,777 ( 40.99%) 164,170,979,198 ( 43.82%) stalled-cycles-backend 70,813,866,387 ( 18.71%) 66,456,858,165 ( 17.74%) instructions 463,436,648,173 ( 1.22) 464,221,890,191 ( 1.24) branches 91,088,733,902 ( 760.088) 91,278,144,546 ( 769.133) branch-misses 504,460,363 ( 0.55%) 394,033,842 ( 0.43%) jobs3 perfstat stalled-cycles-frontend 201,300,397,212 ( 39.84%) 223,969,902,257 ( 44.44%) stalled-cycles-backend 87,712,593,974 ( 17.36%) 81,618,888,712 ( 16.19%) instructions 642,869,545,023 ( 1.27) 644,677,354,132 ( 1.28) branches 125,724,560,594 ( 690.682) 126,133,159,521 ( 694.542) branch-misses 527,941,798 ( 0.42%) 444,782,220 ( 0.35%) jobs4 perfstat stalled-cycles-frontend 246,701,197,429 ( 38.12%) 280,076,030,886 ( 43.29%) stalled-cycles-backend 119,050,341,112 ( 18.40%) 110,955,641,671 ( 17.15%) instructions 822,716,962,127 ( 1.27) 825,536,969,320 ( 1.28) branches 160,590,028,545 ( 688.614) 161,152,996,915 ( 691.068) branch-misses 650,295,287 ( 0.40%) 550,229,113 ( 0.34%) jobs5 perfstat stalled-cycles-frontend 298,958,462,516 ( 38.30%) 344,852,200,358 ( 44.16%) stalled-cycles-backend 137,558,742,122 ( 17.62%) 129,465,067,102 ( 16.58%) instructions 1,005,714,688,752 ( 1.29) 1,007,657,999,432 ( 1.29) branches 195,988,773,962 ( 697.730) 196,446,873,984 ( 700.319) branch-misses 695,818,940 ( 0.36%) 624,823,263 ( 0.32%) jobs6 perfstat stalled-cycles-frontend 334,497,602,856 ( 36.71%) 387,590,419,779 ( 42.38%) stalled-cycles-backend 163,539,365,335 ( 17.95%) 152,640,193,639 ( 16.69%) instructions 1,184,738,177,851 ( 1.30) 1,187,396,281,677 ( 1.30) branches 230,592,915,640 ( 702.902) 231,253,802,882 ( 702.356) branch-misses 747,934,786 ( 0.32%) 643,902,424 ( 0.28%) jobs7 perfstat stalled-cycles-frontend 396,724,684,187 ( 37.71%) 460,705,858,952 ( 43.84%) stalled-cycles-backend 188,096,616,496 ( 17.88%) 175,785,787,036 ( 16.73%) instructions 1,364,041,136,608 ( 1.30) 1,366,689,075,112 ( 1.30) branches 265,253,096,936 ( 700.078) 265,890,524,883 ( 702.839) branch-misses 784,991,589 ( 0.30%) 729,196,689 ( 0.27%) jobs8 perfstat stalled-cycles-frontend 440,248,299,870 ( 36.92%) 509,554,793,816 ( 42.46%) stalled-cycles-backend 222,575,930,616 ( 18.67%) 213,401,248,432 ( 17.78%) instructions 1,542,262,045,114 ( 1.29) 1,545,233,932,257 ( 1.29) branches 299,775,178,439 ( 697.666) 300,528,458,505 ( 694.769) branch-misses 847,496,084 ( 0.28%) 748,794,308 ( 0.25%) jobs9 perfstat stalled-cycles-frontend 506,269,882,480 ( 37.86%) 592,798,032,820 ( 44.43%) stalled-cycles-backend 253,192,498,861 ( 18.93%) 233,727,666,185 ( 17.52%) instructions 1,721,985,080,913 ( 1.29) 1,724,666,236,005 ( 1.29) branches 334,517,360,255 ( 694.134) 335,199,758,164 ( 697.131) branch-misses 873,496,730 ( 0.26%) 815,379,236 ( 0.24%) jobs10 perfstat stalled-cycles-frontend 549,063,363,749 ( 37.18%) 651,302,376,662 ( 43.61%) stalled-cycles-backend 281,680,986,810 ( 19.07%) 277,005,235,582 ( 18.55%) instructions 1,901,859,271,180 ( 1.29) 1,906,311,064,230 ( 1.28) branches 369,398,536,153 ( 694.004) 370,527,696,358 ( 688.409) branch-misses 967,929,335 ( 0.26%) 890,125,056 ( 0.24%) BASE PATCHED seconds elapsed 79.421641008 78.735285546 seconds elapsed 61.471246133 60.869085949 seconds elapsed 62.317058173 62.224188495 seconds elapsed 60.030739363 60.081102518 seconds elapsed 74.070398362 74.317582865 seconds elapsed 84.985953007 85.414364176 seconds elapsed 97.724553255 98.173311344 seconds elapsed 109.488066758 110.268399318 seconds elapsed 122.768189405 122.967164498 seconds elapsed 135.130035105 136.934770801 On my other system (8 x86_64 CPUs, short version of test results): BASE PATCHED seconds elapsed 19.518065994 19.806320662 seconds elapsed 15.172772749 15.594718291 seconds elapsed 13.820925970 13.821708564 seconds elapsed 13.293097816 14.585206405 seconds elapsed 16.207284118 16.064431606 seconds elapsed 17.958376158 17.771825767 seconds elapsed 19.478009164 19.602961508 seconds elapsed 21.347152811 21.352318709 seconds elapsed 24.478121126 24.171088735 seconds elapsed 26.865057442 26.767327618 So performance-wise the numbers are quite similar. Also update zcomp interface to be more aligned with the crypto API. [1] http://marc.info/?l=linux-kernel&m=144480832108927&w=2 [2] http://marc.info/?l=linux-kernel&m=145379613507518&w=2 [3] https://github.com/sergey-senozhatsky/zram-perf-test Link: http://lkml.kernel.org/r/20160531122017.2878-3-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Suggested-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: rename zstrm find-release functionsSergey Senozhatsky2017-09-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This has started as a 'add zlib support' work, but after some thinking I saw no blockers for a bigger change -- a switch to crypto API. We don't have an idle zstreams list anymore and our write path now works absolutely differently, preventing preemption during compression. This removes possibilities of read paths preempting writes at wrong places and opens the door for a move from custom LZO/LZ4 compression backends implementation to a more generic one, using crypto compress API. This patch set also eliminates the need of a new context-less crypto API interface, which was quite hard to sell, so we can move along faster. benchmarks: (x86_64, 4GB, zram-perf script) perf reported run-time fio (max jobs=3). I performed fio test with the increasing number of parallel jobs (max to 3) on a 3G zram device, using `static' data and the following crypto comp algorithms: 842, deflate, lz4, lz4hc, lzo the output was: - test running time (which can tell us what algorithms performs faster) and - zram mm_stat (which tells the compressed memory size, max used memory, etc). It's just for information. for example, LZ4HC has twice the running time of LZO, but the compressed memory size is: 23592960 vs 34603008 bytes. test-fio-zram-842 197.907655282 seconds time elapsed 201.623142884 seconds time elapsed 226.854291345 seconds time elapsed test-fio-zram-DEFLATE 253.259516155 seconds time elapsed 258.148563401 seconds time elapsed 290.251909365 seconds time elapsed test-fio-zram-LZ4 27.022598717 seconds time elapsed 29.580522717 seconds time elapsed 33.293463430 seconds time elapsed test-fio-zram-LZ4HC 56.393954615 seconds time elapsed 74.904659747 seconds time elapsed 101.940998564 seconds time elapsed test-fio-zram-LZO 28.155948075 seconds time elapsed 30.390036330 seconds time elapsed 34.455773159 seconds time elapsed zram mm_stat-s (max fio jobs=3) test-fio-zram-842 mm_stat (jobs1): 3221225472 673185792 690266112 0 690266112 0 0 mm_stat (jobs2): 3221225472 673185792 690266112 0 690266112 0 0 mm_stat (jobs3): 3221225472 673185792 690266112 0 690266112 0 0 test-fio-zram-DEFLATE mm_stat (jobs1): 3221225472 24379392 37761024 0 37761024 0 0 mm_stat (jobs2): 3221225472 24379392 37761024 0 37761024 0 0 mm_stat (jobs3): 3221225472 24379392 37761024 0 37761024 0 0 test-fio-zram-LZ4 mm_stat (jobs1): 3221225472 23592960 37761024 0 37761024 0 0 mm_stat (jobs2): 3221225472 23592960 37761024 0 37761024 0 0 mm_stat (jobs3): 3221225472 23592960 37761024 0 37761024 0 0 test-fio-zram-LZ4HC mm_stat (jobs1): 3221225472 23592960 37761024 0 37761024 0 0 mm_stat (jobs2): 3221225472 23592960 37761024 0 37761024 0 0 mm_stat (jobs3): 3221225472 23592960 37761024 0 37761024 0 0 test-fio-zram-LZO mm_stat (jobs1): 3221225472 34603008 50335744 0 50335744 0 0 mm_stat (jobs2): 3221225472 34603008 50335744 0 50335744 0 0 mm_stat (jobs3): 3221225472 34603008 50335744 0 50339840 0 0 This patch (of 8): We don't perform any zstream idle list lookup anymore, so zcomp_strm_find()/zcomp_strm_release() names are not representative. Rename to zcomp_stream_get()/zcomp_stream_put(). Link: http://lkml.kernel.org/r/20160531122017.2878-2-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: introduce per-device debug_stat sysfs nodeSergey Senozhatsky2017-09-251-0/+21
| | | | | | | | | | | | | | | | | | | | | debug_stat sysfs is read-only and represents various debugging data that zram developers may need. This file is not meant to be used by anyone else: its content is not documented and will change any time w/o any notice. Therefore, the output of debug_stat file contains a version string. To avoid any confusion, we will increase the version number every time we modify the output. At the moment this file exports only one value -- the number of re-compressions, IOW, the number of times compression fast path has failed. This stat is temporary any will be useful in case if any per-cpu compression streams regressions will be reported. Link: http://lkml.kernel.org/r/20160513230834.GB26763@bbox Link: http://lkml.kernel.org/r/20160511134553.12655-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove max_comp_streams internalsSergey Senozhatsky2017-09-251-34/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the internal part of max_comp_streams interface, since we switched to per-cpu streams. We will keep RW max_comp_streams attr around, because: a) we may (silently) switch back to idle compression streams list and don't want to disturb user space b) max_comp_streams attr must wait for the next 'lay off cycle'; we give user space 2 years to adjust before we remove/downgrade the attr, and there are already several attrs scheduled for removal in 4.11, so it's too late for max_comp_streams. This slightly change a user visible behaviour: - First, reading from max_comp_stream file now will always return the number of online CPUs. - Second, writing to max_comp_stream will not take any effect. Link: http://lkml.kernel.org/r/20160503165546.25201-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: user per-cpu compression streamsSergey Senozhatsky2017-09-251-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove idle streams list and keep compression streams in per-cpu data. This removes two contented spin_lock()/spin_unlock() calls from write path and also prevent write OP from being preempted while holding the compression stream, which can cause slow downs. For instance, let's assume that we have N cpus and N-2 max_comp_streams.TASK1 owns the last idle stream, TASK2-TASK3 come in with the write requests: TASK1 TASK2 TASK3 zram_bvec_write() spin_lock find stream spin_unlock compress <<preempted>> zram_bvec_write() spin_lock find stream spin_unlock no_stream schedule zram_bvec_write() spin_lock find_stream spin_unlock no_stream schedule spin_lock release stream spin_unlock wake up TASK2 not only TASK2 and TASK3 will not get the stream, TASK1 will be preempted in the middle of its operation; while we would prefer it to finish compression and release the stream. Test environment: x86_64, 4 CPU box, 3G zram, lzo The following fio tests were executed: read, randread, write, randwrite, rw, randrw with the increasing number of jobs from 1 to 10. 4 streams 8 streams per-cpu =========================================================== jobs1 READ: 2520.1MB/s 2566.5MB/s 2491.5MB/s READ: 2102.7MB/s 2104.2MB/s 2091.3MB/s WRITE: 1355.1MB/s 1320.2MB/s 1378.9MB/s WRITE: 1103.5MB/s 1097.2MB/s 1122.5MB/s READ: 434013KB/s 435153KB/s 439961KB/s WRITE: 433969KB/s 435109KB/s 439917KB/s READ: 403166KB/s 405139KB/s 403373KB/s WRITE: 403223KB/s 405197KB/s 403430KB/s jobs2 READ: 7958.6MB/s 8105.6MB/s 8073.7MB/s READ: 6864.9MB/s 6989.8MB/s 7021.8MB/s WRITE: 2438.1MB/s 2346.9MB/s 3400.2MB/s WRITE: 1994.2MB/s 1990.3MB/s 2941.2MB/s READ: 981504KB/s 973906KB/s 1018.8MB/s WRITE: 981659KB/s 974060KB/s 1018.1MB/s READ: 937021KB/s 938976KB/s 987250KB/s WRITE: 934878KB/s 936830KB/s 984993KB/s jobs3 READ: 13280MB/s 13553MB/s 13553MB/s READ: 11534MB/s 11785MB/s 11755MB/s WRITE: 3456.9MB/s 3469.9MB/s 4810.3MB/s WRITE: 3029.6MB/s 3031.6MB/s 4264.8MB/s READ: 1363.8MB/s 1362.6MB/s 1448.9MB/s WRITE: 1361.9MB/s 1360.7MB/s 1446.9MB/s READ: 1309.4MB/s 1310.6MB/s 1397.5MB/s WRITE: 1307.4MB/s 1308.5MB/s 1395.3MB/s jobs4 READ: 20244MB/s 20177MB/s 20344MB/s READ: 17886MB/s 17913MB/s 17835MB/s WRITE: 4071.6MB/s 4046.1MB/s 6370.2MB/s WRITE: 3608.9MB/s 3576.3MB/s 5785.4MB/s READ: 1824.3MB/s 1821.6MB/s 1997.5MB/s WRITE: 1819.8MB/s 1817.4MB/s 1992.5MB/s READ: 1765.7MB/s 1768.3MB/s 1937.3MB/s WRITE: 1767.5MB/s 1769.1MB/s 1939.2MB/s jobs5 READ: 18663MB/s 18986MB/s 18823MB/s READ: 16659MB/s 16605MB/s 16954MB/s WRITE: 3912.4MB/s 3888.7MB/s 6126.9MB/s WRITE: 3506.4MB/s 3442.5MB/s 5519.3MB/s READ: 1798.2MB/s 1746.5MB/s 1935.8MB/s WRITE: 1792.7MB/s 1740.7MB/s 1929.1MB/s READ: 1727.6MB/s 1658.2MB/s 1917.3MB/s WRITE: 1726.5MB/s 1657.2MB/s 1916.6MB/s jobs6 READ: 21017MB/s 20922MB/s 21162MB/s READ: 19022MB/s 19140MB/s 18770MB/s WRITE: 3968.2MB/s 4037.7MB/s 6620.8MB/s WRITE: 3643.5MB/s 3590.2MB/s 6027.5MB/s READ: 1871.8MB/s 1880.5MB/s 2049.9MB/s WRITE: 1867.8MB/s 1877.2MB/s 2046.2MB/s READ: 1755.8MB/s 1710.3MB/s 1964.7MB/s WRITE: 1750.5MB/s 1705.9MB/s 1958.8MB/s jobs7 READ: 21103MB/s 20677MB/s 21482MB/s READ: 18522MB/s 18379MB/s 19443MB/s WRITE: 4022.5MB/s 4067.4MB/s 6755.9MB/s WRITE: 3691.7MB/s 3695.5MB/s 5925.6MB/s READ: 1841.5MB/s 1933.9MB/s 2090.5MB/s WRITE: 1842.7MB/s 1935.3MB/s 2091.9MB/s READ: 1832.4MB/s 1856.4MB/s 1971.5MB/s WRITE: 1822.3MB/s 1846.2MB/s 1960.6MB/s jobs8 READ: 20463MB/s 20194MB/s 20862MB/s READ: 18178MB/s 17978MB/s 18299MB/s WRITE: 4085.9MB/s 4060.2MB/s 7023.8MB/s WRITE: 3776.3MB/s 3737.9MB/s 6278.2MB/s READ: 1957.6MB/s 1944.4MB/s 2109.5MB/s WRITE: 1959.2MB/s 1946.2MB/s 2111.4MB/s READ: 1900.6MB/s 1885.7MB/s 2082.1MB/s WRITE: 1896.2MB/s 1881.4MB/s 2078.3MB/s jobs9 READ: 19692MB/s 19734MB/s 19334MB/s READ: 17678MB/s 18249MB/s 17666MB/s WRITE: 4004.7MB/s 4064.8MB/s 6990.7MB/s WRITE: 3724.7MB/s 3772.1MB/s 6193.6MB/s READ: 1953.7MB/s 1967.3MB/s 2105.6MB/s WRITE: 1953.4MB/s 1966.7MB/s 2104.1MB/s READ: 1860.4MB/s 1897.4MB/s 2068.5MB/s WRITE: 1858.9MB/s 1895.9MB/s 2066.8MB/s jobs10 READ: 19730MB/s 19579MB/s 19492MB/s READ: 18028MB/s 18018MB/s 18221MB/s WRITE: 4027.3MB/s 4090.6MB/s 7020.1MB/s WRITE: 3810.5MB/s 3846.8MB/s 6426.8MB/s READ: 1956.1MB/s 1994.6MB/s 2145.2MB/s WRITE: 1955.9MB/s 1993.5MB/s 2144.8MB/s READ: 1852.8MB/s 1911.6MB/s 2075.8MB/s WRITE: 1855.7MB/s 1914.6MB/s 2078.1MB/s perf stat 4 streams 8 streams per-cpu ==================================================================================================================== jobs1 stalled-cycles-frontend 23,174,811,209 ( 38.21%) 23,220,254,188 ( 38.25%) 23,061,406,918 ( 38.34%) stalled-cycles-backend 11,514,174,638 ( 18.98%) 11,696,722,657 ( 19.27%) 11,370,852,810 ( 18.90%) instructions 73,925,005,782 ( 1.22) 73,903,177,632 ( 1.22) 73,507,201,037 ( 1.22) branches 14,455,124,835 ( 756.063) 14,455,184,779 ( 755.281) 14,378,599,509 ( 758.546) branch-misses 69,801,336 ( 0.48%) 80,225,529 ( 0.55%) 72,044,726 ( 0.50%) jobs2 stalled-cycles-frontend 49,912,741,782 ( 46.11%) 50,101,189,290 ( 45.95%) 32,874,195,633 ( 35.11%) stalled-cycles-backend 27,080,366,230 ( 25.02%) 27,949,970,232 ( 25.63%) 16,461,222,706 ( 17.58%) instructions 122,831,629,690 ( 1.13) 122,919,846,419 ( 1.13) 121,924,786,775 ( 1.30) branches 23,725,889,239 ( 692.663) 23,733,547,140 ( 688.062) 23,553,950,311 ( 794.794) branch-misses 90,733,041 ( 0.38%) 96,320,895 ( 0.41%) 84,561,092 ( 0.36%) jobs3 stalled-cycles-frontend 66,437,834,608 ( 45.58%) 63,534,923,344 ( 43.69%) 42,101,478,505 ( 33.19%) stalled-cycles-backend 34,940,799,661 ( 23.97%) 34,774,043,148 ( 23.91%) 21,163,324,388 ( 16.68%) instructions 171,692,121,862 ( 1.18) 171,775,373,044 ( 1.18) 170,353,542,261 ( 1.34) branches 32,968,962,622 ( 628.723) 32,987,739,894 ( 630.512) 32,729,463,918 ( 717.027) branch-misses 111,522,732 ( 0.34%) 110,472,894 ( 0.33%) 99,791,291 ( 0.30%) jobs4 stalled-cycles-frontend 98,741,701,675 ( 49.72%) 94,797,349,965 ( 47.59%) 54,535,655,381 ( 33.53%) stalled-cycles-backend 54,642,609,615 ( 27.51%) 55,233,554,408 ( 27.73%) 27,882,323,541 ( 17.14%) instructions 220,884,807,851 ( 1.11) 220,930,887,273 ( 1.11) 218,926,845,851 ( 1.35) branches 42,354,518,180 ( 592.105) 42,362,770,587 ( 590.452) 41,955,552,870 ( 716.154) branch-misses 138,093,449 ( 0.33%) 131,295,286 ( 0.31%) 121,794,771 ( 0.29%) jobs5 stalled-cycles-frontend 116,219,747,212 ( 48.14%) 110,310,397,012 ( 46.29%) 66,373,082,723 ( 33.70%) stalled-cycles-backend 66,325,434,776 ( 27.48%) 64,157,087,914 ( 26.92%) 32,999,097,299 ( 16.76%) instructions 270,615,008,466 ( 1.12) 270,546,409,525 ( 1.14) 268,439,910,948 ( 1.36) branches 51,834,046,557 ( 599.108) 51,811,867,722 ( 608.883) 51,412,576,077 ( 729.213) branch-misses 158,197,086 ( 0.31%) 142,639,805 ( 0.28%) 133,425,455 ( 0.26%) jobs6 stalled-cycles-frontend 138,009,414,492 ( 48.23%) 139,063,571,254 ( 48.80%) 75,278,568,278 ( 32.80%) stalled-cycles-backend 79,211,949,650 ( 27.68%) 79,077,241,028 ( 27.75%) 37,735,797,899 ( 16.44%) instructions 319,763,993,731 ( 1.12) 319,937,782,834 ( 1.12) 316,663,600,784 ( 1.38) branches 61,219,433,294 ( 595.056) 61,250,355,540 ( 598.215) 60,523,446,617 ( 733.706) branch-misses 169,257,123 ( 0.28%) 154,898,028 ( 0.25%) 141,180,587 ( 0.23%) jobs7 stalled-cycles-frontend 162,974,812,119 ( 49.20%) 159,290,061,987 ( 48.43%) 88,046,641,169 ( 33.21%) stalled-cycles-backend 92,223,151,661 ( 27.84%) 91,667,904,406 ( 27.87%) 44,068,454,971 ( 16.62%) instructions 369,516,432,430 ( 1.12) 369,361,799,063 ( 1.12) 365,290,380,661 ( 1.38) branches 70,795,673,950 ( 594.220) 70,743,136,124 ( 597.876) 69,803,996,038 ( 732.822) branch-misses 181,708,327 ( 0.26%) 165,767,821 ( 0.23%) 150,109,797 ( 0.22%) jobs8 stalled-cycles-frontend 185,000,017,027 ( 49.30%) 182,334,345,473 ( 48.37%) 99,980,147,041 ( 33.26%) stalled-cycles-backend 105,753,516,186 ( 28.18%) 107,937,830,322 ( 28.63%) 51,404,177,181 ( 17.10%) instructions 418,153,161,055 ( 1.11) 418,308,565,828 ( 1.11) 413,653,475,581 ( 1.38) branches 80,035,882,398 ( 592.296) 80,063,204,510 ( 589.843) 79,024,105,589 ( 730.530) branch-misses 199,764,528 ( 0.25%) 177,936,926 ( 0.22%) 160,525,449 ( 0.20%) jobs9 stalled-cycles-frontend 210,941,799,094 ( 49.63%) 204,714,679,254 ( 48.55%) 114,251,113,756 ( 33.96%) stalled-cycles-backend 122,640,849,067 ( 28.85%) 122,188,553,256 ( 28.98%) 58,360,041,127 ( 17.35%) instructions 468,151,025,415 ( 1.10) 467,354,869,323 ( 1.11) 462,665,165,216 ( 1.38) branches 89,657,067,510 ( 585.628) 89,411,550,407 ( 588.990) 88,360,523,943 ( 730.151) branch-misses 218,292,301 ( 0.24%) 191,701,247 ( 0.21%) 178,535,678 ( 0.20%) jobs10 stalled-cycles-frontend 233,595,958,008 ( 49.81%) 227,540,615,689 ( 49.11%) 160,341,979,938 ( 43.07%) stalled-cycles-backend 136,153,676,021 ( 29.03%) 133,635,240,742 ( 28.84%) 65,909,135,465 ( 17.70%) instructions 517,001,168,497 ( 1.10) 516,210,976,158 ( 1.11) 511,374,038,613 ( 1.37) branches 98,911,641,329 ( 585.796) 98,700,069,712 ( 591.583) 97,646,761,028 ( 728.712) branch-misses 232,341,823 ( 0.23%) 199,256,308 ( 0.20%) 183,135,268 ( 0.19%) per-cpu streams tend to cause significantly less stalled cycles; execute less branches and hit less branch-misses. perf stat reported execution time 4 streams 8 streams per-cpu ==================================================================== jobs1 seconds elapsed 20.909073870 20.875670495 20.817838540 jobs2 seconds elapsed 18.529488399 18.720566469 16.356103108 jobs3 seconds elapsed 18.991159531 18.991340812 16.766216066 jobs4 seconds elapsed 19.560643828 19.551323547 16.246621715 jobs5 seconds elapsed 24.746498464 25.221646740 20.696112444 jobs6 seconds elapsed 28.258181828 28.289765505 22.885688857 jobs7 seconds elapsed 32.632490241 31.909125381 26.272753738 jobs8 seconds elapsed 35.651403851 36.027596308 29.108024711 jobs9 seconds elapsed 40.569362365 40.024227989 32.898204012 jobs10 seconds elapsed 44.673112304 43.874898137 35.632952191 Please see Link: http://marc.info/?l=linux-kernel&m=146166970727530 Link: http://marc.info/?l=linux-kernel&m=146174716719650 for more test results (under low memory conditions). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zsmalloc: require GFP in zs_malloc()Sergey Senozhatsky2017-09-251-2/+2
| | | | | | | | | | | | | | | | | | Pass GFP flags to zs_malloc() instead of using a fixed mask supplied to zs_create_pool(), so we can be more flexible, but, more importantly, we need this to switch zram to per-cpu compression streams -- zram will try to allocate handle with preemption disabled in a fast path and switch to a slow path (using different gfp mask) if the fast one has failed. Apart from that, this also align zs_malloc() interface with zspool/zbud. [sergey.senozhatsky@gmail.com: pass GFP flags to zs_malloc() instead of using a fixed mask] Link: http://lkml.kernel.org/r/20160429150942.GA637@swordfish Link: http://lkml.kernel.org/r/20160429150942.GA637@swordfish Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zsmalloc: account the number of compacted pagesSergey Senozhatsky2017-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | | Compaction returns back to zram the number of migrated objects, which is quite uninformative -- we have objects of different sizes so user space cannot obtain any valuable data from that number. Change compaction to operate in terms of pages and return back to compaction issuer the number of pages that were freed during compaction. So from now on we will export more meaningful value in zram<id>/mm_stat -- the number of freed (compacted) pages. This requires: (a) a rename of `num_migrated' to 'pages_compacted' (b) a internal API change -- return first_page's fullness_group from putback_zspage(), so we know when putback_zspage() did free_zspage(). It helps us to account compaction stats correctly. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zsmalloc/zram: introduce zs_pool_stats apiSergey Senozhatsky2017-09-251-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | `zs_compact_control' accounts the number of migrated objects but it has a limited lifespan -- we lose it as soon as zs_compaction() returns back to zram. It worked fine, because (a) zram had it's own counter of migrated objects and (b) only zram could trigger compaction. However, this does not work for automatic pool compaction (not issued by zram). To account objects migrated during auto-compaction (issued by the shrinker) we need to store this number in zs_pool. Define a new `struct zs_pool_stats' structure to keep zs_pool's stats there. It provides only `num_migrated', as of this writing, but it surely can be extended. A new zsmalloc zs_pool_stats() symbol exports zs_pool's stats back to caller. Use zs_pool_stats() in zram and remove `num_migrated' from zram_stats. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: don't call idr_remove() from zram_remove()Jerome Marchand2017-09-251-3/+4
| | | | | | | | | | | | | | | | | | The use of idr_remove() is forbidden in the callback functions of idr_for_each(). It is therefore unsafe to call idr_remove in zram_remove(). This patch moves the call to idr_remove() from zram_remove() to hot_remove_store(). In the detroy_devices() path, idrs are removed by idr_destroy(). This solves an use-after-free detected by KASan. [akpm@linux-foundation.org: fix coding stype, per Sergey] Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: make is_partial_io/valid_io_request/page_zero_filled return booleanGeliang Tang2017-09-251-9/+9
| | | | | | | | | | | Make is_partial_io()/valid_io_request()/page_zero_filled() return boolean, since each function only uses either one or zero as its return value. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: keep the exact overcommited value in mem_used_maxSergey SENOZHATSKY2017-09-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `mem_used_max' is designed to store the max amount of memory zram consumed to store the data. However, it does not represent the actual 'overcommited' (max) value. The existing code goes to -ENOMEM overcommited case before it updates `->stats.max_used_pages', which hides the reason we went to -ENOMEM in the first place -- we actually used more memory than `->limit_pages': alloced_pages = zs_get_total_pages(meta->mem_pool); if (zram->limit_pages && alloced_pages > zram->limit_pages) { zs_free(meta->mem_pool, handle); ret = -ENOMEM; goto out; } update_used_max(zram, alloced_pages); Which is misleading. User will see -ENOMEM, check `->limit_pages', check `->stats.max_used_pages', which will keep the value BEFORE zram passed `->limit_pages', and see: `->stats.max_used_pages' < `->limit_pages' Move update_used_max() before we do `->limit_pages' check, so that user will see: `->stats.max_used_pages' > `->limit_pages' should the overcommit and -ENOMEM happen. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: introduce comp algorithm fallback functionalityLuis Henriques2017-09-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the user supplies an unsupported compression algorithm, keep the previously selected one (knowingly supported) or the default one (if the compression algorithm hasn't been changed yet). Note that previously this operation (i.e. setting an invalid algorithm) would result in no algorithm being selected, which means that this represents a small change in the default behaviour. Minchan said: For initializing zram, we need to set up 3 optional parameters in advance. 1. the number of compression streams 2. memory limitation 3. compression algorithm Although user pass completely wrong value to set up for 1 and 2 parameters, it's okay because they have default value so zram will be initialized with the default value (of course, when user passes a wrong value via *echo*, sysfs returns -EINVAL so the user can notice it). But 3 is not consistent with other optional parameters. IOW, if the user passes a wrong value to set up 3 parameter, zram's initialization would fail unlike other optional parameters. So this patch makes them consistent. Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: fix pool name truncationSergey Senozhatsky2017-09-251-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | zram_meta_alloc() constructs a pool name for zs_create_pool() call as snprintf(pool_name, sizeof(pool_name), "zram%d", device_id); However, it defines pool name buffer to be only 8 bytes long (minus trailing zero), which means that we can have only 1000 pool names: zram0 -- zram999. With CONFIG_ZSMALLOC_STAT enabled an attempt to create a device zram1000 can fail if device zram100 already exists, because snprintf() will truncate new pool name to zram100 and pass it debugfs_create_dir(), causing: debugfs dir <zram100> creation failed zram: Error creating memory pool ... and so on. Fix it by passing zram->disk->disk_name to zram_meta_alloc() instead of divice_id. We construct zram%d name earlier and keep it as a ->disk_name, no need to snprintf() it again. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: check comp algorithm availability earlierSergey Senozhatsky2017-09-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Improvement idea by Marcin Jabrzyk. comp_algorithm_store() silently accepts any supplied algorithm name, because zram performs algorithm availability check later, during the device configuration phase in disksize_store() and emits the following error: "zram: Cannot initialise %s compressing backend" this error line is somewhat generic and, besides, can indicate a failed attempt to allocate compression backend's working buffers. add algorithm availability check to comp_algorithm_store(): echo lzz > /sys/block/zram0/comp_algorithm -bash: echo: write error: Invalid argument Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: cut trailing newline in algorithm nameSergey Senozhatsky2017-09-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Supplied sysfs values sometimes contain new-line symbols (echo vs. echo -n), which we also copy as a compression algorithm name. it works fine when we lookup for compression algorithm, because we use sysfs_streq() which takes care of new line symbols. however, it doesn't look nice when we print compression algorithm name if zcomp_create() failed: zram: Cannot initialise LXZ compressing backend cut trailing new-line, so the error string will look like zram: Cannot initialise LXZ compressing backend we also now can replace sysfs_streq() in zcomp_available_show() with strcmp(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: cosmetic zram_bvec_write() cleanupSergey Senozhatsky2017-09-251-5/+3
| | | | | | | | | | | | `bool locked' local variable tells us if we should perform zcomp_strm_release() or not (jumped to `out' label before zcomp_strm_find() occurred), which is equivalent to `zstrm' being or not being NULL. remove `locked' and check `zstrm' instead. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add dynamic device add/remove functionalitySergey Senozhatsky2017-09-251-3/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently don't support on-demand device creation. The one and only way to have N zram devices is to specify num_devices module parameter (default value: 1). IOW if, for some reason, at some point, user wants to have N + 1 devies he/she must umount all the existing devices, unload the module, load the module passing num_devices equals to N + 1. And do this again, if needed. This patch introduces zram control sysfs class, which has two sysfs attrs: - hot_add -- add a new zram device - hot_remove -- remove a specific (device_id) zram device hot_add sysfs attr is read-only and has only automatic device id assignment mode (as requested by Minchan Kim). read operation performed on this attr creates a new zram device and returns back its device_id or error status. Usage example: # add a new specific zram device cat /sys/class/zram-control/hot_add 2 # remove a specific zram device echo 4 > /sys/class/zram-control/hot_remove Returning zram_add() error code back to user (-ENOMEM in this case) cat /sys/class/zram-control/hot_add cat: /sys/class/zram-control/hot_add: Cannot allocate memory NOTE, there might be users who already depend on the fact that at least zram0 device gets always created by zram_init(). Preserve this behavior. [minchan@kernel.org: use zram->claim to avoid lockdep splat] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: close race by open overridingSergey Senozhatsky2017-09-251-19/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Original patch from Minchan Kim <minchan@kernel.org> ] Commit ba6b17d68c8e ("zram: fix umount-reset_store-mount race condition") introduced bdev->bd_mutex to protect a race between mount and reset. At that time, we don't have dynamic zram-add/remove feature so it was okay. However, as we introduce dynamic device feature, bd_mutex became trouble. CPU 0 echo 1 > /sys/block/zram<id>/reset -> kernfs->s_active(A) -> zram:reset_store->bd_mutex(B) CPU 1 echo <id> > /sys/class/zram/zram-remove ->zram:zram_remove: bd_mutex(B) -> sysfs_remove_group -> kernfs->s_active(A) IOW, AB -> BA deadlock The reason we are holding bd_mutex for zram_remove is to prevent any incoming open /dev/zram[0-9]. Otherwise, we could remove zram others already have opened. But it causes above deadlock problem. To fix the problem, this patch overrides block_device.open and it returns -EBUSY if zram asserts he claims zram to reset so any incoming open will be failed so we don't need to hold bd_mutex for zram_remove ayn more. This patch is to prepare for zram-add/remove feature. [sergey.senozhatsky@gmail.com: simplify reset_store()] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: return zram device_id from zram_add()Sergey Senozhatsky2017-09-251-9/+14
| | | | | | | | | | | This patch prepares zram to enable on-demand device creation. zram_add() performs automatic device_id assignment and returns new device id (>= 0) or error code (< 0). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: trivial: correct flag operations commentSergey Senozhatsky2017-09-251-1/+1
| | | | | | | | | | We don't have meta->tb_lock anymore and use meta table entry bit_spin_lock instead. update corresponding comment. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: report every added and removed deviceSergey Senozhatsky2017-09-251-2/+3
| | | | | | | | | | | | | | | | | | | | | With dynamic device creation/removal (which will be introduced later in the series) printing num_devices in zram_init() will not make a lot of sense, as well as printing the number of destroyed devices in destroy_devices(). Print per-device action (added/removed) in zram_add() and zram_remove() instead. Example: [ 3645.259652] zram: Added device: zram5 [ 3646.152074] zram: Added device: zram6 [ 3650.585012] zram: Removed device: zram5 [ 3655.845584] zram: Added device: zram8 [ 3660.975223] zram: Removed device: zram6 Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove max_num_devices limitationSergey Senozhatsky2017-09-251-7/+1
| | | | | | | | | | | Limiting the number of zram devices to 32 (default max_num_devices value) is confusing, let's drop it. A user with 2TB or 4TB of RAM, for example, can request as many devices as he can handle. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: reorganize code layoutSergey Senozhatsky2017-09-251-320/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch looks big, but basically it just moves code blocks. No functional changes. Our current code layout looks like a sandwitch. For example, a) between read/write handlers, we have update_used_max() helper function: static int zram_decompress_page static int zram_bvec_read static inline void update_used_max static int zram_bvec_write static int zram_bvec_rw b) RW request handlers __zram_make_request/zram_bio_discard are divided by sysfs attr reset_store() function and corresponding zram_reset_device() handler: static void zram_bio_discard static void zram_reset_device static ssize_t disksize_store static ssize_t reset_store static void __zram_make_request c) we first a bunch of sysfs read/store functions. then a number of one-liners, then helper functions, RW functions, sysfs functions, helper functions again, and so on. Reorganize layout to be more logically grouped (a brief description, `cat zram_drv.c | grep static` gives a bigger picture): -- one-liners: zram_test_flag/etc. -- helpers: is_partial_io/update_position/etc -- sysfs attr show/store functions + ZRAM_ATTR_RO() generated stats show() functions exception: reset and disksize store functions are required to be after meta() functions. because we do device create/destroy actions in these sysfs handlers. -- "mm" functions: meta get/put, meta alloc/free, page free static inline bool zram_meta_get static inline void zram_meta_put static void zram_meta_free static struct zram_meta *zram_meta_alloc static void zram_free_page -- a block of I/O functions static int zram_decompress_page static int zram_bvec_read static int zram_bvec_write static void zram_bio_discard static int zram_bvec_rw static void __zram_make_request static void zram_make_request static void zram_slot_free_notify static int zram_rw_page -- device contol: add/remove/init/reset functions (+zram-control class will sit here) static int zram_reset_device static ssize_t reset_store static ssize_t disksize_store static int zram_add static void zram_remove static int __init zram_init static void __exit zram_exit Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: use idr instead of `zram_devices' arraySergey Senozhatsky2017-09-251-37/+50
| | | | | | | | | | | | | | | | | | This patch makes some preparations for on-demand device add/remove functionality. Remove `zram_devices' array and switch to id-to-pointer translation (idr). idr doesn't bloat zram struct with additional members, f.e. list_head, yet still provides ability to match the device_id with the device pointer. No user-space visible changes. [Julia.Lawall@lip6.fr: return -ENOMEM when `queue' alloc fails] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: cosmetic ZRAM_ATTR_RO code formatting tweakSergey Senozhatsky2017-09-251-1/+1
| | | | | | | | | Fix a misplaced backslash. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove obsolete ZRAM_DEBUG optionMarcin Jabrzyk2017-09-251-4/+0
| | | | | | | | | | | This config option doesn't provide any usage for zram. Signed-off-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram/zsmalloc: Squashed fixes zcomp lz4 header fixMister Oyster2017-09-251-1/+1
| | | | | | fix zram drv h include fix build
* block: zram: Backport from Linux 4.1Sultan Qasim Khan2017-09-251-157/+408
| | | | Change-Id: I23f6f75979077992298d848efd79a6efc0d776bd
* Revert zram updates to merge 4.1 driversMister Oyster2017-09-251-30/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert "zram: do not use copy_page with non-page aligned address" This reverts commit ed3e8707d2e19d6da506d8ab298e68e79b6621f2. Revert "zram: sym permissions -> octal perm (checkpath warnings)" This reverts commit 920095f4566b901834f9b41395968b739b402d4c. Revert "zram: fix indents/warnings from checkpath" This reverts commit 0a2fdee5446969c8c70bbdc9f8fde93eb1d47327. Revert "UPSTREAM: zram/zcomp: do not zero out zcomp private pages" This reverts commit d13c0c08323df29367affc7b7623d9d2d0ccfbb2. Revert "UPSTREAM: zram: pass gfp from zcomp frontend to backend" This reverts commit 6d22d73c07a0f2ffe706e88c302d52371ad29206. Revert "UPSTREAM: zram: try vmalloc() after kmalloc()" This reverts commit e6af82ad8a5599a783e9850aca8f1b32fc1f93f4. Revert "UPSTREAM: zram/zcomp: use GFP_NOIO to allocate streams" This reverts commit 38e34f1f6f1c9ee9c7f3958fcb35e72174337690. Revert "zram: Fix a wrong return after merged new LZ4 version" This reverts commit 7832ce6d8a006747a4c27840b4f7e7d3c12f0dbb. Revert "zram: change usage of LZ4 to work with new LZ4 version" This reverts commit 56622e86d4356054aad833aa8547992fdb76e4e3. Revert "zram: avoid lockdep splat by revalidate_disk" This reverts commit 149cadf4d8043f55a0d92cacc4b3d3d9cfb75148. Revert "zram: revalidate disk after capacity change" This reverts commit 270bdcb8d33f5c4769edab61f33f2fe43c8636f8.
* zram: do not use copy_page with non-page aligned addressMinchan Kim2017-05-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d72e9a7a93e4f8e9e52491921d99e0c8aa89eb4e upstream. The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joe Maples <joe@frap129.org>
* zram: sym permissions -> octal perm (checkpath warnings)Mister Oyster2017-04-161-8/+8
|
* zram: fix indents/warnings from checkpathMister Oyster2017-04-161-0/+4
|
* zram: avoid lockdep splat by revalidate_diskMinchan Kim2017-04-111-4/+18
| | | | | | | | | | | | | | | | | | | | | | | Sasha reported lockdep warning [1] introduced by [2]. It could be fixed by doing disk revalidation out of the init_lock. It's okay because disk capacity change is protected by init_lock so that revalidate_disk always sees up-to-date value so there is no race. [1] https://lkml.org/lkml/2014/7/3/735 [2] zram: revalidate disk after capacity change Fixes 2e32baea46ce ("zram: revalidate disk after capacity change"). Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: "Alexander E. Patrakov" <patrakov@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: revalidate disk after capacity changeMinchan Kim2017-04-111-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexander reported mkswap on /dev/zram0 is failed if other process is opening the block device file. Step is as follows, 0. Reset the unused zram device. 1. Use a program that opens /dev/zram0 with O_RDWR and sleeps until killed. 2. While that program sleeps, echo the correct value to /sys/block/zram0/disksize. 3. Verify (e.g. in /proc/partitions) that the disk size is applied correctly. It is. 4. While that program still sleeps, attempt to mkswap /dev/zram0. This fails: mkswap: error: swap area needs to be at least 40 KiB When I investigated, the size get by ioctl(fd, BLKGETSIZE64, xxx) on mkswap to get a size of blockdev was zero although zram0 has right size by 2. The reason is zram didn't revalidate disk after changing capacity so that size of blockdev's inode is not uptodate until all of file is close. This patch should fix the BUG. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Alexander E. Patrakov <patrakov@gmail.com> Tested-by: Alexander E. Patrakov <patrakov@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: correct offset usage in zram_bio_discardWeijie Yang2016-12-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to skip the physical block(PAGE_SIZE) which is partially covered by the discard bio, so we check the remaining size and subtract it if there is a need to goto the next physical block. The current offset usage in zram_bio_discard is incorrect, it will cause its upper filesystem breakdown. Consider the following scenario: On some architecture or config, PAGE_SIZE is 64K for example, filesystem is set up on zram disk without PAGE_SIZE aligned, a discard bio leads to a offset = 4K and size=72K, normally, it should not really discard any physical block as it partially cover two physical blocks. However, with the current offset usage, it will discard the second physical block and free its memory, which will cause filesystem breakdown. This patch corrects the offset usage in zram_bio_discard. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: support REQ_DISCARDJoonsoo Kim2016-12-111-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | zram is ram based block device and can be used by backend of filesystem. When filesystem deletes a file, it normally doesn't do anything on data block of that file. It just marks on metadata of that file. This behavior has no problem on disk based block device, but has problems on ram based block device, since we can't free memory used for data block. To overcome this disadvantage, there is REQ_DISCARD functionality. If block device support REQ_DISCARD and filesystem is mounted with discard option, filesystem sends REQ_DISCARD to block device whenever some data blocks are discarded. All we have to do is to handle this request. This patch implements to flag up QUEUE_FLAG_DISCARD and handle this REQ_DISCARD request. With it, we can free memory used by zram if it isn't used. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
* set number of streams to 3DerTeufel2016-12-111-1/+1
|
* zram: use scnprintf() in attrs show() methodsSergey Senozhatsky2016-12-111-6/+6
| | | | | | | | | | | | | | | | | | | | | sysfs.txt documentation lists the following requirements: - The buffer will always be PAGE_SIZE bytes in length. On i386, this is 4096. - show() methods should return the number of bytes printed into the buffer. This is the return value of scnprintf(). - show() should always use scnprintf(). Use scnprintf() in show() functions. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: propagate error to userMinchan Kim2016-12-111-4/+13
| | | | | | | | | | | | | | | | | | | | | When we initialized zcomp with single, we couldn't change max_comp_streams without zram reset but current interface doesn't show any error to user and even it changes max_comp_streams's value without any effect so it would make user very confusing. This patch prevents max_comp_streams's change when zcomp was initialized as single zcomp and emit the error to user(ex, echo). [akpm@linux-foundation.org: don't return with the lock held, per Sergey] [fengguang.wu@intel.com: fix coccinelle warnings] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: return error-valued pointer from zcomp_create()Sergey Senozhatsky2016-12-111-9/+10
| | | | | | | | | | | | | | | | | | | | | Instead of returning just NULL, return ERR_PTR from zcomp_create() if compressing backend creation has failed. ERR_PTR(-EINVAL) for unsupported compression algorithm request, ERR_PTR(-ENOMEM) for allocation (zcomp or compression stream) error. Perform IS_ERR() check of returned from zcomp_create() value in disksize_store() and set return code to PTR_ERR(). Change suggested by Jerome Marchand. [akpm@linux-foundation.org: clean up error recovery flow] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Jerome Marchand <jmarchan@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: move comp allocation out of init_lockSergey Senozhatsky2016-12-111-12/+15
| | | | | | | | | | | | | | | | | | While fixing lockdep spew of ->init_lock reported by Sasha Levin [1], Minchan Kim noted [2] that it's better to move compression backend allocation (using GPF_KERNEL) out of the ->init_lock lock, same way as with zram_meta_alloc(), in order to prevent the same lockdep spew. [1] https://lkml.org/lkml/2014/2/27/337 [2] https://lkml.org/lkml/2014/3/3/32 Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: make compression algorithm selection possibleSergey Senozhatsky2016-12-111-3/+34
| | | | | | | | | | | | | | | | | | | Add and document `comp_algorithm' device attribute. This attribute allows to show supported compression and currently selected compression algorithms: cat /sys/block/zram0/comp_algorithm [lzo] lz4 and change selected compression algorithm: echo lzo > /sys/block/zram0/comp_algorithm Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add set_max_streams knobSergey Senozhatsky2016-12-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | This patch allows to change max_comp_streams on initialised zcomp. Introduce zcomp set_max_streams() knob, zcomp_strm_multi_set_max_streams() and zcomp_strm_single_set_max_streams() callbacks to change streams limit for zcomp_strm_multi and zcomp_strm_single, accordingly. set_max_streams for single steam zcomp does nothing. If user has lowered the limit, then zcomp_strm_multi_set_max_streams() attempts to immediately free extra streams (as much as it can, depending on idle streams availability). Note, this patch does not allow to change stream 'policy' from single to multi stream (or vice versa) on already initialised compression backend. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add multi stream functionalitySergey Senozhatsky2016-12-111-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing zram (zcomp) implementation has only one compression stream (buffer and algorithm private part), so in order to prevent data corruption only one write (compress operation) can use this compression stream, forcing all concurrent write operations to wait for stream lock to be released. This patch changes zcomp to keep a compression streams list of user-defined size (via sysfs device attr). Each write operation still exclusively holds compression stream, the difference is that we can have N write operations (depending on size of streams list) executing in parallel. See TEST section later in commit message for performance data. Introduce struct zcomp_strm_multi and a set of functions to manage zcomp_strm stream access. zcomp_strm_multi has a list of idle zcomp_strm structs, spinlock to protect idle list and wait queue, making it possible to perform parallel compressions. The following set of functions added: - zcomp_strm_multi_find()/zcomp_strm_multi_release() find and release a compression stream, implement required locking - zcomp_strm_multi_create()/zcomp_strm_multi_destroy() create and destroy zcomp_strm_multi zcomp ->strm_find() and ->strm_release() callbacks are set during initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release() correspondingly. Each time zcomp issues a zcomp_strm_multi_find() call, the following set of operations performed: - spin lock strm_lock - if idle list is not empty, remove zcomp_strm from idle list, spin unlock and return zcomp stream pointer to caller - if idle list is empty, current adds itself to wait queue. it will be awaken by zcomp_strm_multi_release() caller. zcomp_strm_multi_release(): - spin lock strm_lock - add zcomp stream to idle list - spin unlock, wake up sleeper Minchan Kim reported that spinlock-based locking scheme has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16) base spinlock mutex ==Initial write ==Initial write ==Initial write records: 5 records: 5 records: 5 avg: 1642424.35 avg: 699610.40 avg: 1655583.71 std: 39890.95(2.43%) std: 232014.19(33.16%) std: 52293.96 max: 1690170.94 max: 1163473.45 max: 1697164.75 min: 1568669.52 min: 573429.88 min: 1553410.23 ==Rewrite ==Rewrite ==Rewrite records: 5 records: 5 records: 5 avg: 1611775.39 avg: 501406.64 avg: 1684419.11 std: 17144.58(1.06%) std: 15354.41(3.06%) std: 18367.42 max: 1641800.95 max: 531356.78 max: 1706445.84 min: 1593515.27 min: 488817.78 min: 1655335.73 When only one compression stream available, mutex with spin on owner tends to perform much better than frequent wait_event()/wake_up(). This is why single stream implemented as a special case with mutex locking. Introduce and document zram device attribute max_comp_streams. This attr shows and stores current zcomp's max number of zcomp streams (max_strm). Extend zcomp's zcomp_create() with `max_strm' parameter. `max_strm' limits the number of zcomp_strm structs in compression backend's idle list (max_comp_streams). max_comp_streams used during initialisation as follows: -- passing to zcomp_create() max_strm equals to 1 will initialise zcomp using single compression stream zcomp_strm_single (mutex-based locking). -- passing to zcomp_create() max_strm greater than 1 will initialise zcomp using multi compression stream zcomp_strm_multi (spinlock-based locking). default max_comp_streams value is 1, meaning that zram with single stream will be initialised. Later patch will introduce configuration knob to change max_comp_streams on already initialised and used zcomp. TEST iozone -t 3 -R -r 16K -s 60M -I +Z test base 1 strm (mutex) 3 strm (spinlock) ----------------------------------------------------------------------- Initial write 589286.78 583518.39 718011.05 Rewrite 604837.97 596776.38 1515125.72 Random write 584120.11 595714.58 1388850.25 Pwrite 535731.17 541117.38 739295.27 Fwrite 1418083.88 1478612.72 1484927.06 Usage example: set max_comp_streams to 4 echo 4 > /sys/block/zram0/max_comp_streams show current max_comp_streams (default value is 1). cat /sys/block/zram0/max_comp_streams Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: Documentation/ABI/testing/sysfs-block-zram
* zram: use zcomp compressing backendsSergey Senozhatsky2016-12-111-38/+31
| | | | | | | | | | | | | | | | Do not perform direct LZO compress/decompress calls, initialise and use zcomp LZO backend (single compression stream) instead. [akpm@linux-foundation.org: resolve conflicts with zram-delete-zram_init_device-fix.patch] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: drivers/block/zram/zram_drv.c
generated by cgit v1.2.3 (git 2.39.1) at 2026-04-29 16:04:19 +0000