1 files changed, 132 insertions, 4 deletions
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index c039fe131..69cfc6e09 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -276,10 +276,138 @@ extern unsigned long preset_lpj;
 /*
  * Convert various time units to each other:
  */
-extern unsigned int jiffies_to_msecs(const unsigned long j);
-extern unsigned int jiffies_to_usecs(const unsigned long j);
-extern unsigned long msecs_to_jiffies(const unsigned int m);
-extern unsigned long usecs_to_jiffies(const unsigned int u);
+
+/*
+ * Avoid unnecessary multiplications/divisions in the
+ * two most common HZ cases:
+ */
+static __always_inline unsigned int
+__inline_jiffies_to_msecs(const unsigned long j)
+{
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+	return (MSEC_PER_SEC / HZ) * j;
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+	return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
+#else
+# if BITS_PER_LONG == 32
+	return (HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32;
+# else
+	return (j * HZ_TO_MSEC_NUM) / HZ_TO_MSEC_DEN;
+# endif
+#endif
+}
+extern unsigned int __jiffies_to_msecs(const unsigned long j);
+
+#define jiffies_to_msecs(x)			\
+	(__builtin_constant_p(x) ?		\
+	 __inline_jiffies_to_msecs(x) :		\
+	 __jiffies_to_msecs(x))
+
+static __always_inline unsigned int
+__inline_jiffies_to_usecs(const unsigned long j)
+{
+#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
+	return (USEC_PER_SEC / HZ) * j;
+#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
+	return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
+#else
+# if BITS_PER_LONG == 32
+	return (HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
+# else
+	return (j * HZ_TO_USEC_NUM) / HZ_TO_USEC_DEN;
+# endif
+#endif
+}
+extern unsigned int __jiffies_to_usecs(const unsigned long j);
+
+#define jiffies_to_usecs(x)			\
+	(__builtin_constant_p(x) ?		\
+	 __inline_jiffies_to_usecs(x) :		\
+	 __jiffies_to_usecs(x))
+
+/*
+ * When we convert to jiffies then we interpret incoming values
+ * the following way:
+ *
+ * - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET)
+ *
+ * - 'too large' values [that would result in larger than
+ *   MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
+ *
+ * - all other values are converted to jiffies by either multiplying
+ *   the input value by a factor or dividing it with a factor
+ *
+ * We must also be careful about 32-bit overflows.
+ */
+static __always_inline unsigned long
+__inline_msecs_to_jiffies(const unsigned int m)
+{
+	/*
+	 * Negative value, means infinite timeout:
+	 */
+	if ((int)m < 0)
+		return MAX_JIFFY_OFFSET;
+
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+	/*
+	 * HZ is equal to or smaller than 1000, and 1000 is a nice
+	 * round multiple of HZ, divide with the factor between them,
+	 * but round upwards:
+	 */
+	return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+	/*
+	 * HZ is larger than 1000, and HZ is a nice round multiple of
+	 * 1000 - simply multiply with the factor between them.
+	 *
+	 * But first make sure the multiplication result cannot
+	 * overflow:
+	 */
+	if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+
+	return m * (HZ / MSEC_PER_SEC);
+#else
+	/*
+	 * Generic case - multiply, round and divide. But first
+	 * check that if we are doing a net multiplication, that
+	 * we wouldn't overflow:
+	 */
+	if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+
+	return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
+		>> MSEC_TO_HZ_SHR32;
+#endif
+}
+extern unsigned long __msecs_to_jiffies(const unsigned int m);
+
+#define msecs_to_jiffies(x)			\
+	(__builtin_constant_p(x) ?		\
+	 __inline_msecs_to_jiffies(x) :		\
+	 __msecs_to_jiffies(x))
+
+static __always_inline unsigned long
+__inline_usecs_to_jiffies(const unsigned int u)
+{
+	if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
+	return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
+#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
+	return u * (HZ / USEC_PER_SEC);
+#else
+	return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
+		>> USEC_TO_HZ_SHR32;
+#endif
+}
+extern unsigned long __usecs_to_jiffies(const unsigned int u);
+
+#define usecs_to_jiffies(x)			\
+	(__builtin_constant_p(x) ?		\
+	 __inline_usecs_to_jiffies(x) :		\
+	 __usecs_to_jiffies(x))
+
 extern unsigned long timespec_to_jiffies(const struct timespec *value);
 extern void jiffies_to_timespec(const unsigned long jiffies,
 				struct timespec *value);