first commit

1 files changed, 387 insertions, 0 deletions

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
new file mode 100644
index 000000000..a782f3ca7
--- /dev/null
+++ b/include/linux/serial_core.h
@@ -0,0 +1,387 @@
+/*
+ *  linux/drivers/char/serial_core.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef LINUX_SERIAL_CORE_H
+#define LINUX_SERIAL_CORE_H
+
+
+#include <linux/compiler.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/mutex.h>
+#include <linux/sysrq.h>
+#include <uapi/linux/serial_core.h>
+
+struct uart_port;
+struct serial_struct;
+struct device;
+
+/*
+ * This structure describes all the operations that can be done on the
+ * physical hardware.  See Documentation/serial/driver for details.
+ */
+struct uart_ops {
+	unsigned int	(*tx_empty)(struct uart_port *);
+	void		(*set_mctrl)(struct uart_port *, unsigned int mctrl);
+	unsigned int	(*get_mctrl)(struct uart_port *);
+	void		(*stop_tx)(struct uart_port *);
+	void		(*start_tx)(struct uart_port *);
+	void		(*throttle)(struct uart_port *);
+	void		(*unthrottle)(struct uart_port *);
+	void		(*send_xchar)(struct uart_port *, char ch);
+	void		(*stop_rx)(struct uart_port *);
+	void		(*enable_ms)(struct uart_port *);
+	void		(*break_ctl)(struct uart_port *, int ctl);
+	int		(*startup)(struct uart_port *);
+	void		(*shutdown)(struct uart_port *);
+	void		(*flush_buffer)(struct uart_port *);
+	void		(*set_termios)(struct uart_port *, struct ktermios *new,
+				       struct ktermios *old);
+	void		(*set_ldisc)(struct uart_port *, int new);
+	void		(*pm)(struct uart_port *, unsigned int state,
+			      unsigned int oldstate);
+	int		(*set_wake)(struct uart_port *, unsigned int state);
+	void		(*wake_peer)(struct uart_port *);
+
+	/*
+	 * Return a string describing the type of the port
+	 */
+	const char	*(*type)(struct uart_port *);
+
+	/*
+	 * Release IO and memory resources used by the port.
+	 * This includes iounmap if necessary.
+	 */
+	void		(*release_port)(struct uart_port *);
+
+	/*
+	 * Request IO and memory resources used by the port.
+	 * This includes iomapping the port if necessary.
+	 */
+	int		(*request_port)(struct uart_port *);
+	void		(*config_port)(struct uart_port *, int);
+	int		(*verify_port)(struct uart_port *, struct serial_struct *);
+	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
+#ifdef CONFIG_CONSOLE_POLL
+	int		(*poll_init)(struct uart_port *);
+	void		(*poll_put_char)(struct uart_port *, unsigned char);
+	int		(*poll_get_char)(struct uart_port *);
+#endif
+};
+
+#define NO_POLL_CHAR		0x00ff0000
+#define UART_CONFIG_TYPE	(1 << 0)
+#define UART_CONFIG_IRQ		(1 << 1)
+
+struct uart_icount {
+	__u32	cts;
+	__u32	dsr;
+	__u32	rng;
+	__u32	dcd;
+	__u32	rx;
+	__u32	tx;
+	__u32	frame;
+	__u32	overrun;
+	__u32	parity;
+	__u32	brk;
+	__u32	buf_overrun;
+};
+
+typedef unsigned int __bitwise__ upf_t;
+
+struct uart_port {
+	spinlock_t		lock;			/* port lock */
+	unsigned long		iobase;			/* in/out[bwl] */
+	unsigned char __iomem	*membase;		/* read/write[bwl] */
+	unsigned int		(*serial_in)(struct uart_port *, int);
+	void			(*serial_out)(struct uart_port *, int, int);
+	void			(*set_termios)(struct uart_port *,
+				               struct ktermios *new,
+				               struct ktermios *old);
+	int			(*handle_irq)(struct uart_port *);
+	void			(*pm)(struct uart_port *, unsigned int state,
+				      unsigned int old);
+	void			(*handle_break)(struct uart_port *);
+	unsigned int		irq;			/* irq number */
+	unsigned long		irqflags;		/* irq flags  */
+	unsigned int		uartclk;		/* base uart clock */
+	unsigned int		fifosize;		/* tx fifo size */
+	unsigned char		x_char;			/* xon/xoff char */
+	unsigned char		regshift;		/* reg offset shift */
+	unsigned char		iotype;			/* io access style */
+	unsigned char		unused1;
+
+#define UPIO_PORT		(0)
+#define UPIO_HUB6		(1)
+#define UPIO_MEM		(2)
+#define UPIO_MEM32		(3)
+#define UPIO_AU			(4)			/* Au1x00 and RT288x type IO */
+#define UPIO_TSI		(5)			/* Tsi108/109 type IO */
+
+	unsigned int		read_status_mask;	/* driver specific */
+	unsigned int		ignore_status_mask;	/* driver specific */
+	struct uart_state	*state;			/* pointer to parent state */
+	struct uart_icount	icount;			/* statistics */
+
+	struct console		*cons;			/* struct console, if any */
+#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
+	unsigned long		sysrq;			/* sysrq timeout */
+#endif
+
+	upf_t			flags;
+
+#define UPF_FOURPORT		((__force upf_t) (1 << 1))
+#define UPF_SAK			((__force upf_t) (1 << 2))
+#define UPF_SPD_MASK		((__force upf_t) (0x1030))
+#define UPF_SPD_HI		((__force upf_t) (0x0010))
+#define UPF_SPD_VHI		((__force upf_t) (0x0020))
+#define UPF_SPD_CUST		((__force upf_t) (0x0030))
+#define UPF_SPD_SHI		((__force upf_t) (0x1000))
+#define UPF_SPD_WARP		((__force upf_t) (0x1010))
+#define UPF_SKIP_TEST		((__force upf_t) (1 << 6))
+#define UPF_AUTO_IRQ		((__force upf_t) (1 << 7))
+#define UPF_HARDPPS_CD		((__force upf_t) (1 << 11))
+#define UPF_LOW_LATENCY		((__force upf_t) (1 << 13))
+#define UPF_BUGGY_UART		((__force upf_t) (1 << 14))
+#define UPF_NO_TXEN_TEST	((__force upf_t) (1 << 15))
+#define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
+/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */
+#define UPF_HARD_FLOW		((__force upf_t) (1 << 21))
+/* Port has hardware-assisted s/w flow control */
+#define UPF_SOFT_FLOW		((__force upf_t) (1 << 22))
+#define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
+#define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
+#define UPF_EXAR_EFR		((__force upf_t) (1 << 25))
+#define UPF_BUG_THRE		((__force upf_t) (1 << 26))
+/* The exact UART type is known and should not be probed.  */
+#define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
+#define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
+#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
+#define UPF_DEAD		((__force upf_t) (1 << 30))
+#define UPF_IOREMAP		((__force upf_t) (1 << 31))
+
+#define UPF_CHANGE_MASK		((__force upf_t) (0x17fff))
+#define UPF_USR_MASK		((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
+
+	unsigned int		mctrl;			/* current modem ctrl settings */
+	unsigned int		timeout;		/* character-based timeout */
+	unsigned int		type;			/* port type */
+	const struct uart_ops	*ops;
+	unsigned int		custom_divisor;
+	unsigned int		line;			/* port index */
+	resource_size_t		mapbase;		/* for ioremap */
+	struct device		*dev;			/* parent device */
+	unsigned char		hub6;			/* this should be in the 8250 driver */
+	unsigned char		suspended;
+	unsigned char		irq_wake;
+	unsigned char		unused[2];
+	void			*private_data;		/* generic platform data pointer */
+};
+
+static inline int serial_port_in(struct uart_port *up, int offset)
+{
+	return up->serial_in(up, offset);
+}
+
+static inline void serial_port_out(struct uart_port *up, int offset, int value)
+{
+	up->serial_out(up, offset, value);
+}
+
+/**
+ * enum uart_pm_state - power states for UARTs
+ * @UART_PM_STATE_ON: UART is powered, up and operational
+ * @UART_PM_STATE_OFF: UART is powered off
+ * @UART_PM_STATE_UNDEFINED: sentinel
+ */
+enum uart_pm_state {
+	UART_PM_STATE_ON = 0,
+	UART_PM_STATE_OFF = 3, /* number taken from ACPI */
+	UART_PM_STATE_UNDEFINED,
+};
+
+/*
+ * This is the state information which is persistent across opens.
+ */
+struct uart_state {
+	struct tty_port		port;
+
+	enum uart_pm_state	pm_state;
+	struct circ_buf		xmit;
+
+	struct uart_port	*uart_port;
+};
+
+#define UART_XMIT_SIZE	PAGE_SIZE
+
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS		256
+
+struct module;
+struct tty_driver;
+
+struct uart_driver {
+	struct module		*owner;
+	const char		*driver_name;
+	const char		*dev_name;
+	int			 major;
+	int			 minor;
+	int			 nr;
+	struct console		*cons;
+
+	/*
+	 * these are private; the low level driver should not
+	 * touch these; they should be initialised to NULL
+	 */
+	struct uart_state	*state;
+	struct tty_driver	*tty_driver;
+};
+
+void uart_write_wakeup(struct uart_port *port);
+
+/*
+ * Baud rate helpers.
+ */
+void uart_update_timeout(struct uart_port *port, unsigned int cflag,
+			 unsigned int baud);
+unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+				struct ktermios *old, unsigned int min,
+				unsigned int max);
+unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
+
+/* Base timer interval for polling */
+static inline int uart_poll_timeout(struct uart_port *port)
+{
+	int timeout = port->timeout;
+
+	return timeout > 6 ? (timeout / 2 - 2) : 1;
+}
+
+/*
+ * Console helpers.
+ */
+struct uart_port *uart_get_console(struct uart_port *ports, int nr,
+				   struct console *c);
+void uart_parse_options(char *options, int *baud, int *parity, int *bits,
+			int *flow);
+int uart_set_options(struct uart_port *port, struct console *co, int baud,
+		     int parity, int bits, int flow);
+struct tty_driver *uart_console_device(struct console *co, int *index);
+void uart_console_write(struct uart_port *port, const char *s,
+			unsigned int count,
+			void (*putchar)(struct uart_port *, int));
+
+/*
+ * Port/driver registration/removal
+ */
+int uart_register_driver(struct uart_driver *uart);
+void uart_unregister_driver(struct uart_driver *uart);
+int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_match_port(struct uart_port *port1, struct uart_port *port2);
+
+/*
+ * Power Management
+ */
+int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
+int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
+
+#define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
+#define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)
+
+#define uart_circ_chars_pending(circ)	\
+	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_circ_chars_free(circ)	\
+	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+static inline int uart_tx_stopped(struct uart_port *port)
+{
+	struct tty_struct *tty = port->state->port.tty;
+	if(tty->stopped || tty->hw_stopped)
+		return 1;
+	return 0;
+}
+
+/*
+ * The following are helper functions for the low level drivers.
+ */
+
+extern void uart_handle_dcd_change(struct uart_port *uport,
+		unsigned int status);
+extern void uart_handle_cts_change(struct uart_port *uport,
+		unsigned int status);
+
+extern void uart_insert_char(struct uart_port *port, unsigned int status,
+		 unsigned int overrun, unsigned int ch, unsigned int flag);
+
+#ifdef SUPPORT_SYSRQ
+static inline int
+uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
+{
+	if (port->sysrq) {
+		if (ch && time_before(jiffies, port->sysrq)) {
+			handle_sysrq(ch);
+			port->sysrq = 0;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+	return 0;
+}
+#else
+#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
+#endif
+
+/*
+ * We do the SysRQ and SAK checking like this...
+ */
+static inline int uart_handle_break(struct uart_port *port)
+{
+	struct uart_state *state = port->state;
+
+	if (port->handle_break)
+		port->handle_break(port);
+
+#ifdef SUPPORT_SYSRQ
+	if (port->cons && port->cons->index == port->line) {
+		if (!port->sysrq) {
+			port->sysrq = jiffies + HZ*5;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+#endif
+	if (port->flags & UPF_SAK)
+		do_SAK(state->port.tty);
+	return 0;
+}
+
+/*
+ *	UART_ENABLE_MS - determine if port should enable modem status irqs
+ */
+#define UART_ENABLE_MS(port,cflag)	((port)->flags & UPF_HARDPPS_CD || \
+					 (cflag) & CRTSCTS || \
+					 !((cflag) & CLOCAL))
+
+#endif /* LINUX_SERIAL_CORE_H */