3.10.102-> 3.10.103

61 files changed, 364 insertions, 279 deletions

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index a02a91cd1..c5e3dd938 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -385,6 +385,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	int result;
 	struct acpi_pci_root *root;
 	u32 flags, base_flags;
+	bool no_aspm = false, clear_aspm = false;
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
@@ -445,31 +446,10 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
 	acpi_pci_osc_support(root, flags);
 
-	/*
-	 * TBD: Need PCI interface for enumeration/configuration of roots.
-	 */
-
 	mutex_lock(&acpi_pci_root_lock);
 	list_add_tail(&root->node, &acpi_pci_roots);
 	mutex_unlock(&acpi_pci_root_lock);
 
-	/*
-	 * Scan the Root Bridge
-	 * --------------------
-	 * Must do this prior to any attempt to bind the root device, as the
-	 * PCI namespace does not get created until this call is made (and
-	 * thus the root bridge's pci_dev does not exist).
-	 */
-	root->bus = pci_acpi_scan_root(root);
-	if (!root->bus) {
-		printk(KERN_ERR PREFIX
-			    "Bus %04x:%02x not present in PCI namespace\n",
-			    root->segment, (unsigned int)root->secondary.start);
-		result = -ENODEV;
-		goto out_del_root;
-	}
-
-	/* Indicate support for various _OSC capabilities. */
 	if (pci_ext_cfg_avail())
 		flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
 	if (pcie_aspm_support_enabled()) {
@@ -483,7 +463,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		if (ACPI_FAILURE(status)) {
 			dev_info(&device->dev, "ACPI _OSC support "
 				"notification failed, disabling PCIe ASPM\n");
-			pcie_no_aspm();
+			no_aspm = true;
 			flags = base_flags;
 		}
 	}
@@ -515,7 +495,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 				 * We have ASPM control, but the FADT indicates
 				 * that it's unsupported. Clear it.
 				 */
-				pcie_clear_aspm(root->bus);
+				clear_aspm = true;
 			}
 		} else {
 			dev_info(&device->dev,
@@ -524,7 +504,14 @@ static int acpi_pci_root_add(struct acpi_device *device,
 				acpi_format_exception(status), flags);
 			pr_info("ACPI _OSC control for PCIe not granted, "
 				"disabling ASPM\n");
-			pcie_no_aspm();
+			/*
+			 * We want to disable ASPM here, but aspm_disabled
+			 * needs to remain in its state from boot so that we
+			 * properly handle PCIe 1.1 devices.  So we set this
+			 * flag here, to defer the action until after the ACPI
+			 * root scan.
+			 */
+			no_aspm = true;
 		}
 	} else {
 		dev_info(&device->dev,
@@ -532,6 +519,33 @@ static int acpi_pci_root_add(struct acpi_device *device,
 			 "(_OSC support mask: 0x%02x)\n", flags);
 	}
 
+	/*
+	 * TBD: Need PCI interface for enumeration/configuration of roots.
+	 */
+
+	/*
+	 * Scan the Root Bridge
+	 * --------------------
+	 * Must do this prior to any attempt to bind the root device, as the
+	 * PCI namespace does not get created until this call is made (and
+	 * thus the root bridge's pci_dev does not exist).
+	 */
+	root->bus = pci_acpi_scan_root(root);
+	if (!root->bus) {
+		dev_err(&device->dev,
+			"Bus %04x:%02x not present in PCI namespace\n",
+			root->segment, (unsigned int)root->secondary.start);
+		result = -ENODEV;
+		goto end;
+	}
+
+	if (clear_aspm) {
+		dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n");
+		pcie_clear_aspm(root->bus);
+	}
+	if (no_aspm)
+		pcie_no_aspm();
+
 	pci_acpi_add_bus_pm_notifier(device, root->bus);
 	if (device->wakeup.flags.run_wake)
 		device_set_run_wake(root->bus->bridge, true);
@@ -548,11 +562,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	pci_bus_add_devices(root->bus);
 	return 1;
 
-out_del_root:
-	mutex_lock(&acpi_pci_root_lock);
-	list_del(&root->node);
-	mutex_unlock(&acpi_pci_root_lock);
-
 end:
 	kfree(root);
 	return result;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 063036d87..126eb86f2 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -604,7 +604,7 @@ void ata_scsi_error(struct Scsi_Host *host)
 	ata_scsi_port_error_handler(host, ap);
 
 	/* finish or retry handled scmd's and clean up */
-	WARN_ON(host->host_failed || !list_empty(&eh_work_q));
+	WARN_ON(!list_empty(&eh_work_q));
 
 	DPRINTK("EXIT\n");
 }
diff --git a/drivers/base/module.c b/drivers/base/module.c
index db930d3ee..2a215780e 100644
--- a/drivers/base/module.c
+++ b/drivers/base/module.c
@@ -24,10 +24,12 @@ static char *make_driver_name(struct device_driver *drv)
 
 static void module_create_drivers_dir(struct module_kobject *mk)
 {
-	if (!mk || mk->drivers_dir)
-		return;
+	static DEFINE_MUTEX(drivers_dir_mutex);
 
-	mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj);
+	mutex_lock(&drivers_dir_mutex);
+	if (mk && !mk->drivers_dir)
+		mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj);
+	mutex_unlock(&drivers_dir_mutex);
 }
 
 void module_add_driver(struct module *mod, struct device_driver *drv)
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 6789c1653..cde4a6e0f 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -806,7 +806,7 @@ int hash_process_data(
 						&device_data->state);
 				memmove(req_ctx->state.buffer,
 						device_data->state.buffer,
-						HASH_BLOCK_SIZE / sizeof(u32));
+						HASH_BLOCK_SIZE);
 				if (ret) {
 					dev_err(device_data->dev, "[%s] "
 							"hash_resume_state()"
@@ -858,7 +858,7 @@ int hash_process_data(
 
 			memmove(device_data->state.buffer,
 					req_ctx->state.buffer,
-					HASH_BLOCK_SIZE / sizeof(u32));
+					HASH_BLOCK_SIZE);
 			if (ret) {
 				dev_err(device_data->dev, "[%s] "
 						"hash_save_state()"
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 426c51dd4..ac11e455a 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -75,7 +75,7 @@ MODULE_DEVICE_TABLE(i2c, pca953x_id);
 #define MAX_BANK 5
 #define BANK_SZ 8
 
-#define NBANK(chip) (chip->gpio_chip.ngpio / BANK_SZ)
+#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
 
 struct pca953x_chip {
 	unsigned gpio_start;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index b78cbe74d..93b74107d 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -1313,7 +1313,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 			  int n, int width, int height)
 {
 	int c, o;
-	struct drm_device *dev = fb_helper->dev;
 	struct drm_connector *connector;
 	struct drm_connector_helper_funcs *connector_funcs;
 	struct drm_encoder *encoder;
@@ -1334,7 +1333,7 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	if (modes[n] == NULL)
 		return best_score;
 
-	crtcs = kzalloc(dev->mode_config.num_connector *
+	crtcs = kzalloc(fb_helper->connector_count *
 			sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
 	if (!crtcs)
 		return best_score;
@@ -1381,7 +1380,7 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 			best_crtc = crtc;
 			best_score = score;
 			memcpy(best_crtcs, crtcs,
-			       dev->mode_config.num_connector *
+			       fb_helper->connector_count *
 			       sizeof(struct drm_fb_helper_crtc *));
 		}
 	}
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_pkg_sender.c b/drivers/gpu/drm/gma500/mdfld_dsi_pkg_sender.c
index 489ffd2c6..a3d37e4a8 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_pkg_sender.c
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_pkg_sender.c
@@ -85,7 +85,7 @@ static const char *const dsi_errors[] = {
 	"RX Prot Violation",
 	"HS Generic Write FIFO Full",
 	"LP Generic Write FIFO Full",
-	"Generic Read Data Avail"
+	"Generic Read Data Avail",
 	"Special Packet Sent",
 	"Tearing Effect",
 };
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index f3cce23f4..f4b9b1c0c 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1144,7 +1144,7 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
 		    le16_to_cpu(firmware_info->info.usReferenceClock);
 		p1pll->reference_div = 0;
 
-		if (crev < 2)
+		if ((frev < 2) && (crev < 2))
 			p1pll->pll_out_min =
 				le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output);
 		else
@@ -1153,7 +1153,7 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
 		p1pll->pll_out_max =
 		    le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output);
 
-		if (crev >= 4) {
+		if (((frev < 2) && (crev >= 4)) || (frev >= 2)) {
 			p1pll->lcd_pll_out_min =
 				le16_to_cpu(firmware_info->info_14.usLcdMinPixelClockPLL_Output) * 100;
 			if (p1pll->lcd_pll_out_min == 0)
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 8c44ef578..a7e1893de 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -11,6 +11,7 @@
 #include <acpi/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <linux/pci.h>
+#include <linux/delay.h>
 
 #include "radeon_acpi.h"
 
@@ -252,6 +253,10 @@ static int radeon_atpx_set_discrete_state(struct radeon_atpx *atpx, u8 state)
 		if (!info)
 			return -EIO;
 		kfree(info);
+
+		/* 200ms delay is required after off */
+		if (state == 0)
+			msleep(200);
 	}
 	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 1fbd38b37..ea62810ae 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1691,7 +1691,6 @@ radeon_add_atom_connector(struct drm_device *dev,
 						      1);
 			/* no HPD on analog connectors */
 			radeon_connector->hpd.hpd = RADEON_HPD_NONE;
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 			connector->interlace_allowed = true;
 			connector->doublescan_allowed = true;
 			break;
@@ -1889,8 +1888,10 @@ radeon_add_atom_connector(struct drm_device *dev,
 	}
 
 	if (radeon_connector->hpd.hpd == RADEON_HPD_NONE) {
-		if (i2c_bus->valid)
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		if (i2c_bus->valid) {
+			connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+			                    DRM_CONNECTOR_POLL_DISCONNECT;
+		}
 	} else
 		connector->polled = DRM_CONNECTOR_POLL_HPD;
 
@@ -1962,7 +1963,6 @@ radeon_add_legacy_connector(struct drm_device *dev,
 					      1);
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
-		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		connector->interlace_allowed = true;
 		connector->doublescan_allowed = true;
 		break;
@@ -2047,10 +2047,13 @@ radeon_add_legacy_connector(struct drm_device *dev,
 	}
 
 	if (radeon_connector->hpd.hpd == RADEON_HPD_NONE) {
-		if (i2c_bus->valid)
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		if (i2c_bus->valid) {
+			connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+			                    DRM_CONNECTOR_POLL_DISCONNECT;
+		}
 	} else
 		connector->polled = DRM_CONNECTOR_POLL_HPD;
+
 	connector->display_info.subpixel_order = subpixel_order;
 	drm_sysfs_connector_add(connector);
 }
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 8df1525f7..e9db3f812 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -449,6 +449,23 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 /*
  * GPU helpers function.
  */
+
+/**
+ * radeon_device_is_virtual - check if we are running is a virtual environment
+ *
+ * Check if the asic has been passed through to a VM (all asics).
+ * Used at driver startup.
+ * Returns true if virtual or false if not.
+ */
+static bool radeon_device_is_virtual(void)
+{
+#ifdef CONFIG_X86
+	return boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#else
+	return false;
+#endif
+}
+
 /**
  * radeon_card_posted - check if the hw has already been initialized
  *
@@ -462,6 +479,10 @@ bool radeon_card_posted(struct radeon_device *rdev)
 {
 	uint32_t reg;
 
+	/* for pass through, always force asic_init */
+	if (radeon_device_is_virtual())
+		return false;
+
 	/* required for EFI mode on macbook2,1 which uses an r5xx asic */
 	if (efi_enabled(EFI_BOOT) &&
 	    (rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) &&
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 1419f8bd1..8fae6e3ca 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1101,7 +1101,7 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 		return;
 
 	/* report the usage code as scancode if the key status has changed */
-	if (usage->type == EV_KEY && !!test_bit(usage->code, input->key) != value)
+	if (usage->type == EV_KEY && (!!test_bit(usage->code, input->key)) != value)
 		input_event(input, EV_MSC, MSC_SCAN, usage->hid);
 
 	input_event(input, usage->type, usage->code, value);
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 2f1ddca6f..700145b15 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -516,13 +516,13 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd,
 					goto inval;
 			} else if (uref->usage_index >= field->report_count)
 				goto inval;
-
-			else if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) &&
-				 (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
-				  uref->usage_index + uref_multi->num_values > field->report_count))
-				goto inval;
 		}
 
+		if ((cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) &&
+		    (uref_multi->num_values > HID_MAX_MULTI_USAGES ||
+		     uref->usage_index + uref_multi->num_values > field->report_count))
+			goto inval;
+
 		switch (cmd) {
 		case HIDIOCGUSAGE:
 			uref->value = field->value[uref->usage_index];
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index 7c9a1d97d..a22c42745 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -81,7 +81,7 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
 
 	mutex_lock(&st->buf_lock);
 	ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
-	if (ret)
+	if (ret < 0)
 		goto error_ret;
 	st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C);
 	st->tx[1] = (ret & ~KXSD9_FS_MASK) | i;
@@ -163,7 +163,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
-		if (ret)
+		if (ret < 0)
 			goto error_ret;
 		*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
 		ret = IIO_VAL_INT_PLUS_MICRO;
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index c2744a75c..6569a4e2a 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -406,7 +406,7 @@ static int ad7266_probe(struct spi_device *spi)
 	st = iio_priv(indio_dev);
 
 	st->reg = regulator_get(&spi->dev, "vref");
-	if (!IS_ERR_OR_NULL(st->reg)) {
+	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
 			goto error_put_reg;
@@ -417,6 +417,10 @@ static int ad7266_probe(struct spi_device *spi)
 
 		st->vref_uv = ret;
 	} else {
+		/* Any other error indicates that the regulator does exist */
+		if (PTR_ERR(st->reg) != -ENODEV)
+			return PTR_ERR(st->reg);
+
 		/* Use internal reference */
 		st->vref_uv = 2500000;
 	}
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 4d6c7d84e..301becccf 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -203,22 +203,35 @@ static int iio_trigger_attach_poll_func(struct iio_trigger *trig,
 
 	/* Prevent the module from being removed whilst attached to a trigger */
 	__module_get(pf->indio_dev->info->driver_module);
+
+	/* Get irq number */
 	pf->irq = iio_trigger_get_irq(trig);
+	if (pf->irq < 0)
+		goto out_put_module;
+
+	/* Request irq */
 	ret = request_threaded_irq(pf->irq, pf->h, pf->thread,
 				   pf->type, pf->name,
 				   pf);
-	if (ret < 0) {
-		module_put(pf->indio_dev->info->driver_module);
-		return ret;
-	}
+	if (ret < 0)
+		goto out_put_irq;
 
+	/* Enable trigger in driver */
 	if (trig->ops && trig->ops->set_trigger_state && notinuse) {
 		ret = trig->ops->set_trigger_state(trig, true);
 		if (ret < 0)
-			module_put(pf->indio_dev->info->driver_module);
+			goto out_free_irq;
 	}
 
 	return ret;
+
+out_free_irq:
+	free_irq(pf->irq, pf);
+out_put_irq:
+	iio_trigger_put_irq(trig, pf->irq);
+out_put_module:
+	module_put(pf->indio_dev->info->driver_module);
+	return ret;
 }
 
 static int iio_trigger_detach_poll_func(struct iio_trigger *trig,
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index f2f63933e..5befec118 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -48,6 +48,7 @@
 
 #include <asm/uaccess.h>
 
+#include <rdma/ib.h>
 #include <rdma/ib_cm.h>
 #include <rdma/ib_user_cm.h>
 #include <rdma/ib_marshall.h>
@@ -1104,6 +1105,9 @@ static ssize_t ib_ucm_write(struct file *filp, const char __user *buf,
 	struct ib_ucm_cmd_hdr hdr;
 	ssize_t result;
 
+	if (WARN_ON_ONCE(!ib_safe_file_access(filp)))
+		return -EACCES;
+
 	if (len < sizeof(hdr))
 		return -EINVAL;
 
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 5ca44cd9b..99f1c1707 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -43,6 +43,7 @@
 #include <linux/sysctl.h>
 #include <linux/module.h>
 
+#include <rdma/ib.h>
 #include <rdma/rdma_user_cm.h>
 #include <rdma/ib_marshall.h>
 #include <rdma/rdma_cm.h>
@@ -1249,6 +1250,9 @@ static ssize_t ucma_write(struct file *filp, const char __user *buf,
 	struct rdma_ucm_cmd_hdr hdr;
 	ssize_t ret;
 
+	if (WARN_ON_ONCE(!ib_safe_file_access(filp)))
+		return -EACCES;
+
 	if (len < sizeof(hdr))
 		return -EINVAL;
 
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index b6062b923..f50623d07 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -48,6 +48,8 @@
 
 #include <asm/uaccess.h>
 
+#include <rdma/ib.h>
+
 #include "uverbs.h"
 
 MODULE_AUTHOR("Roland Dreier");
@@ -588,6 +590,9 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf,
 	struct ib_uverbs_file *file = filp->private_data;
 	struct ib_uverbs_cmd_hdr hdr;
 
+	if (WARN_ON_ONCE(!ib_safe_file_access(filp)))
+		return -EACCES;
+
 	if (count < sizeof hdr)
 		return -EINVAL;
 
diff --git a/drivers/infiniband/hw/mlx4/ah.c b/drivers/infiniband/hw/mlx4/ah.c
index 890c23b3d..f55d69500 100644
--- a/drivers/infiniband/hw/mlx4/ah.c
+++ b/drivers/infiniband/hw/mlx4/ah.c
@@ -65,6 +65,7 @@ static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr,
 
 	ah->av.ib.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24));
 	ah->av.ib.g_slid  = ah_attr->src_path_bits;
+	ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28);
 	if (ah_attr->ah_flags & IB_AH_GRH) {
 		ah->av.ib.g_slid   |= 0x80;
 		ah->av.ib.gid_index = ah_attr->grh.sgid_index;
@@ -82,7 +83,6 @@ static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr,
 		       !(1 << ah->av.ib.stat_rate & dev->caps.stat_rate_support))
 			--ah->av.ib.stat_rate;
 	}
-	ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28);
 
 	return &ah->ibah;
 }
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 262a18437..1fe3bdb0d 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -346,7 +346,7 @@ static int send_wqe_overhead(enum mlx4_ib_qp_type type, u32 flags)
 			sizeof (struct mlx4_wqe_raddr_seg);
 	case MLX4_IB_QPT_RC:
 		return sizeof (struct mlx4_wqe_ctrl_seg) +
-			sizeof (struct mlx4_wqe_atomic_seg) +
+			sizeof (struct mlx4_wqe_masked_atomic_seg) +
 			sizeof (struct mlx4_wqe_raddr_seg);
 	case MLX4_IB_QPT_SMI:
 	case MLX4_IB_QPT_GSI:
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index b56c9428f..8cb29b36c 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -45,6 +45,8 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 
+#include <rdma/ib.h>
+
 #include "qib.h"
 #include "qib_common.h"
 #include "qib_user_sdma.h"
@@ -1977,6 +1979,9 @@ static ssize_t qib_write(struct file *fp, const char __user *data,
 	ssize_t ret = 0;
 	void *dest;
 
+	if (WARN_ON_ONCE(!ib_safe_file_access(fp)))
+		return -EACCES;
+
 	if (count < sizeof(cmd.type)) {
 		ret = -EINVAL;
 		goto bail;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index b6e049a3c..a481094af 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -887,7 +887,9 @@ struct ipoib_neigh *ipoib_neigh_get(struct net_device *dev, u8 *daddr)
 				neigh = NULL;
 				goto out_unlock;
 			}
-			neigh->alive = jiffies;
+
+			if (likely(skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE))
+				neigh->alive = jiffies;
 			goto out_unlock;
 		}
 	}
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 856c1b03e..685e125d6 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -843,6 +843,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_endpoint_descriptor *ep_irq_in;
 	int i, error;
 
+	if (intf->cur_altsetting->desc.bNumEndpoints != 2)
+		return -ENODEV;
+
 	for (i = 0; xpad_device[i].idVendor; i++) {
 		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
 		    (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index a0a4bbaef..3f2f3ac96 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -835,9 +835,15 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 }
 
 #ifdef CONFIG_COMPAT
+
+#define UI_SET_PHYS_COMPAT	_IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t)
+
 static long uinput_compat_ioctl(struct file *file,
 				unsigned int cmd, unsigned long arg)
 {
+	if (cmd == UI_SET_PHYS_COMPAT)
+		cmd = UI_SET_PHYS;
+
 	return uinput_ioctl_handler(file, cmd, arg, compat_ptr(arg));
 }
 #endif
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 9a83be6b6..abba11220 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -28,7 +28,7 @@ MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-#define W8001_MAX_LENGTH	11
+#define W8001_MAX_LENGTH	13
 #define W8001_LEAD_MASK		0x80
 #define W8001_LEAD_BYTE		0x80
 #define W8001_TAB_MASK		0x40
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index a7e493978..eab916793 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2295,8 +2295,8 @@ _hfcpci_softirq(struct device *dev, void *arg)
 static void
 hfcpci_softirq(void *arg)
 {
-	(void) driver_for_each_device(&hfc_driver.driver, NULL, arg,
-				      _hfcpci_softirq);
+	WARN_ON_ONCE(driver_for_each_device(&hfc_driver.driver, NULL, arg,
+				      _hfcpci_softirq) != 0);
 
 	/* if next event would be in the past ... */
 	if ((s32)(hfc_jiffies + tics - jiffies) <= 0)
diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c
index 7fcf21cb4..a9a47cd02 100644
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -286,10 +286,16 @@ static int flakey_map(struct dm_target *ti, struct bio *bio)
 		pb->bio_submitted = true;
 
 		/*
-		 * Map reads as normal.
+		 * Map reads as normal only if corrupt_bio_byte set.
 		 */
-		if (bio_data_dir(bio) == READ)
-			goto map_bio;
+		if (bio_data_dir(bio) == READ) {
+			/* If flags were specified, only corrupt those that match. */
+			if (fc->corrupt_bio_byte && (fc->corrupt_bio_rw == READ) &&
+			    all_corrupt_bio_flags_match(bio, fc))
+				goto map_bio;
+			else
+				return -EIO;
+		}
 
 		/*
 		 * Drop writes?
@@ -327,12 +333,13 @@ static int flakey_end_io(struct dm_target *ti, struct bio *bio, int error)
 
 	/*
 	 * Corrupt successful READs while in down state.
-	 * If flags were specified, only corrupt those that match.
 	 */
-	if (fc->corrupt_bio_byte && !error && pb->bio_submitted &&
-	    (bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) &&
-	    all_corrupt_bio_flags_match(bio, fc))
-		corrupt_bio_data(bio, fc);
+	if (!error && pb->bio_submitted && (bio_data_dir(bio) == READ)) {
+		if (fc->corrupt_bio_byte)
+			corrupt_bio_data(bio, fc);
+		else
+			return -EIO;
+	}
 
 	return error;
 }
diff --git a/drivers/media/dvb-frontends/stb6100.c b/drivers/media/dvb-frontends/stb6100.c
index cea175d19..4ef8a5c70 100644
--- a/drivers/media/dvb-frontends/stb6100.c
+++ b/drivers/media/dvb-frontends/stb6100.c
@@ -193,7 +193,7 @@ static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int st
 		.len	= len + 1
 	};
 
-	if (1 + len > sizeof(buf)) {
+	if (1 + len > sizeof(cmdbuf)) {
 		printk(KERN_WARNING
 		       "%s: i2c wr: len=%d is too big!\n",
 		       KBUILD_MODNAME, len);
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 961d7ff75..eb92027ce 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1000,6 +1000,11 @@ static int match_child(struct device *dev, void *data)
 	return !strcmp(dev_name(dev), (char *)data);
 }
 
+static void s5p_mfc_memdev_release(struct device *dev)
+{
+	dma_release_declared_memory(dev);
+}
+
 static void *mfc_get_drv_data(struct platform_device *pdev);
 
 static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
@@ -1012,6 +1017,9 @@ static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
 		mfc_err("Not enough memory\n");
 		return -ENOMEM;
 	}
+
+	dev_set_name(dev->mem_dev_l, "%s", "s5p-mfc-l");
+	dev->mem_dev_l->release = s5p_mfc_memdev_release;
 	device_initialize(dev->mem_dev_l);
 	of_property_read_u32_array(dev->plat_dev->dev.of_node,
 			"samsung,mfc-l", mem_info, 2);
@@ -1029,6 +1037,9 @@ static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
 		mfc_err("Not enough memory\n");
 		return -ENOMEM;
 	}
+
+	dev_set_name(dev->mem_dev_r, "%s", "s5p-mfc-r");
+	dev->mem_dev_r->release = s5p_mfc_memdev_release;
 	device_initialize(dev->mem_dev_r);
 	of_property_read_u32_array(dev->plat_dev->dev.of_node,
 			"samsung,mfc-r", mem_info, 2);
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index e0431a5cb..65ed30232 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2114,8 +2114,8 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq,
 
 	packed_cmd_hdr = packed->cmd_hdr;
 	memset(packed_cmd_hdr, 0, sizeof(packed->cmd_hdr));
-	packed_cmd_hdr[0] = (packed->nr_entries << 16) |
-		(PACKED_CMD_WR << 8) | PACKED_CMD_VER;
+	packed_cmd_hdr[0] = cpu_to_le32((packed->nr_entries << 16) |
+		(PACKED_CMD_WR << 8) | PACKED_CMD_VER);
 	hdr_blocks = mmc_large_sector(card) ? 8 : 1;
 
 	/*
@@ -2129,14 +2129,14 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq,
 			((brq->data.blocks * brq->data.blksz) >=
 			 card->ext_csd.data_tag_unit_size);
 		/* Argument of CMD23 */
-		packed_cmd_hdr[(i * 2)] =
+		packed_cmd_hdr[(i * 2)] = cpu_to_le32(
 			(do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) |
 			(do_data_tag ? MMC_CMD23_ARG_TAG_REQ : 0) |
-			blk_rq_sectors(prq);
+			blk_rq_sectors(prq));
 		/* Argument of CMD18 or CMD25 */
-		packed_cmd_hdr[((i * 2)) + 1] =
+		packed_cmd_hdr[((i * 2)) + 1] = cpu_to_le32(
 			mmc_card_blockaddr(card) ?
-			blk_rq_pos(prq) : blk_rq_pos(prq) << 9;
+			blk_rq_pos(prq) : blk_rq_pos(prq) << 9);
 		packed->blocks += blk_rq_sectors(prq);
 		i++;
 	}
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 1efc8cfd0..76ba27478 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1174,6 +1174,9 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
 			goto out_detach;
 	}
 
+	/* Make device "available" before it becomes accessible via sysfs */
+	ubi_devices[ubi_num] = ubi;
+
 	err = uif_init(ubi, &ref);
 	if (err)
 		goto out_detach;
@@ -1220,7 +1223,6 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
 	wake_up_process(ubi->bgt_thread);
 	spin_unlock(&ubi->wl_lock);
 
-	ubi_devices[ubi_num] = ubi;
 	ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
 	return ubi_num;
 
@@ -1231,6 +1233,7 @@ out_uif:
 	ubi_assert(ref);
 	uif_close(ubi);
 out_detach:
+	ubi_devices[ubi_num] = NULL;
 	ubi_wl_close(ubi);
 	ubi_free_internal_volumes(ubi);
 	kfree(ubi->vtbl);
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 8330703c0..96131eb34 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -534,13 +534,6 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 		spin_unlock(&ubi->volumes_lock);
 	}
 
-	/* Change volume table record */
-	vtbl_rec = ubi->vtbl[vol_id];
-	vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs);
-	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
-	if (err)
-		goto out_acc;
-
 	if (pebs < 0) {
 		for (i = 0; i < -pebs; i++) {
 			err = ubi_eba_unmap_leb(ubi, vol, reserved_pebs + i);
@@ -558,6 +551,24 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 		spin_unlock(&ubi->volumes_lock);
 	}
 
+	/*
+	 * When we shrink a volume we have to flush all pending (erase) work.
+	 * Otherwise it can happen that upon next attach UBI finds a LEB with
+	 * lnum > highest_lnum and refuses to attach.
+	 */
+	if (pebs < 0) {
+		err = ubi_wl_flush(ubi, vol_id, UBI_ALL);
+		if (err)
+			goto out_acc;
+	}
+
+	/* Change volume table record */
+	vtbl_rec = ubi->vtbl[vol_id];
+	vtbl_rec.reserved_pebs = cpu_to_be32(reserved_pebs);
+	err = ubi_change_vtbl_record(ubi, vol_id, &vtbl_rec);
+	if (err)
+		goto out_acc;
+
 	vol->reserved_pebs = reserved_pebs;
 	if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
 		vol->used_ebs = reserved_pebs;
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 535d5dd8d..024078c5f 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -731,9 +731,10 @@ static int at91_poll_rx(struct net_device *dev, int quota)
 
 	/* upper group completed, look again in lower */
 	if (priv->rx_next > get_mb_rx_low_last(priv) &&
-	    quota > 0 && mb > get_mb_rx_last(priv)) {
+	    mb > get_mb_rx_last(priv)) {
 		priv->rx_next = get_mb_rx_first(priv);
-		goto again;
+		if (quota > 0)
+			goto again;
 	}
 
 	return received;
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index f66aeb79a..464e5f66b 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -772,6 +772,11 @@ static int can_newlink(struct net *src_net, struct net_device *dev,
 	return -EOPNOTSUPP;
 }
 
+static void can_dellink(struct net_device *dev, struct list_head *head)
+{
+	return;
+}
+
 static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.kind		= "can",
 	.maxtype	= IFLA_CAN_MAX,
@@ -779,6 +784,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.setup		= can_setup,
 	.newlink	= can_newlink,
 	.changelink	= can_changelink,
+	.dellink	= can_dellink,
 	.get_size	= can_get_size,
 	.fill_info	= can_fill_info,
 	.get_xstats_size = can_get_xstats_size,
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index a85a9c2f1..7357e54f1 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -86,9 +86,14 @@ static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp)
 	while (!cur_buf->skb && next != rxq->read_idx) {
 		struct alx_rfd *rfd = &rxq->rfd[cur];
 
-		skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp);
+		skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size + 64, gfp);
 		if (!skb)
 			break;
+
+		/* Workround for the HW RX DMA overflow issue */
+		if (((unsigned long)skb->data & 0xfff) == 0xfc0)
+			skb_reserve(skb, 64);
+
 		dma = dma_map_single(&alx->hw.pdev->dev,
 				     skb->data, alx->rxbuf_size,
 				     DMA_FROM_DEVICE);
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index d5643c143..df3af299a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -210,7 +210,7 @@
 /* Various constants */
 
 /* Coalescing */
-#define MVNETA_TXDONE_COAL_PKTS		1
+#define MVNETA_TXDONE_COAL_PKTS		0	/* interrupt per packet */
 #define MVNETA_RX_COAL_PKTS		32
 #define MVNETA_RX_COAL_USEC		100
 
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 74581cbca..a58024193 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -477,6 +477,13 @@ advance:
 	if (cdc_ncm_setup(ctx))
 		goto error2;
 
+	/* Some firmwares need a pause here or they will silently fail
+	 * to set up the interface properly.  This value was decided
+	 * empirically on a Sierra Wireless MC7455 running 02.08.02.00
+	 * firmware.
+	 */
+	usleep_range(10000, 20000);
+
 	/* configure data interface */
 	temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
 	if (temp)
@@ -598,24 +605,13 @@ EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
 
 static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
-
 	/* MBIM backwards compatible function? */
 	cdc_ncm_select_altsetting(dev, intf);
 	if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
 		return -ENODEV;
 
 	/* NCM data altsetting is always 1 */
-	ret = cdc_ncm_bind_common(dev, intf, 1);
-
-	/*
-	 * We should get an event when network connection is "connected" or
-	 * "disconnected". Set network connection in "disconnected" state
-	 * (carrier is OFF) during attach, so the IP network stack does not
-	 * start IPv6 negotiation and more.
-	 */
-	usbnet_link_change(dev, 0, 0);
-	return ret;
+	return cdc_ncm_bind_common(dev, intf, 1);
 }
 
 static void cdc_ncm_align_tail(struct sk_buff *skb, size_t modulus, size_t remainder, size_t max)
@@ -1161,7 +1157,8 @@ static void cdc_ncm_disconnect(struct usb_interface *intf)
 
 static const struct driver_info cdc_ncm_info = {
 	.description = "CDC NCM",
-	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET,
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+			| FLAG_LINK_INTR,
 	.bind = cdc_ncm_bind,
 	.unbind = cdc_ncm_unbind,
 	.check_connect = cdc_ncm_check_connect,
@@ -1175,7 +1172,7 @@ static const struct driver_info cdc_ncm_info = {
 static const struct driver_info wwan_info = {
 	.description = "Mobile Broadband Network Device",
 	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
-			| FLAG_WWAN,
+			| FLAG_LINK_INTR | FLAG_WWAN,
 	.bind = cdc_ncm_bind,
 	.unbind = cdc_ncm_unbind,
 	.check_connect = cdc_ncm_check_connect,
@@ -1189,7 +1186,7 @@ static const struct driver_info wwan_info = {
 static const struct driver_info wwan_noarp_info = {
 	.description = "Mobile Broadband Network Device (NO ARP)",
 	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
-			| FLAG_WWAN | FLAG_NOARP,
+			| FLAG_LINK_INTR | FLAG_WWAN | FLAG_NOARP,
 	.bind = cdc_ncm_bind,
 	.unbind = cdc_ncm_unbind,
 	.check_connect = cdc_ncm_check_connect,
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index f77ef36ac..61879b1f7 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -77,7 +77,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath5k_led_devices) = {
 	/* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
 	/* HP Compaq C700 (nitrousnrg@gmail.com) */
-	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
+	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 0) },
 	/* LiteOn AR5BXB63 (magooz@salug.it) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_ATHEROS, 0x3067), ATH_LED(3, 0) },
 	/* IBM-specific AR5212 (all others) */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index cb34c7895..735c26620 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1931,6 +1931,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
 	if (!info->attrs[HWSIM_ATTR_ADDR_TRANSMITTER] ||
 	   !info->attrs[HWSIM_ATTR_FLAGS] ||
 	   !info->attrs[HWSIM_ATTR_COOKIE] ||
+	   !info->attrs[HWSIM_ATTR_SIGNAL] ||
 	   !info->attrs[HWSIM_ATTR_TX_INFO])
 		goto out;
 
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 6fc0853fd..d066f74f7 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -1392,9 +1392,9 @@ void rtl_watchdog_wq_callback(void *data)
 		if (((rtlpriv->link_info.num_rx_inperiod +
 		      rtlpriv->link_info.num_tx_inperiod) > 8) ||
 		    (rtlpriv->link_info.num_rx_inperiod > 2))
-			rtlpriv->enter_ps = true;
-		else
 			rtlpriv->enter_ps = false;
+		else
+			rtlpriv->enter_ps = true;
 
 		/* LeisurePS only work in infra mode. */
 		schedule_work(&rtlpriv->works.lps_change_work);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d332d5588..2d7cd0c08 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -173,9 +173,6 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	struct pci_bus_region region;
 	bool bar_too_big = false, bar_disabled = false;
 
-	if (dev->non_compliant_bars)
-		return 0;
-
 	mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
 
 	/* No printks while decoding is disabled! */
@@ -295,6 +292,9 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 {
 	unsigned int pos, reg;
 
+	if (dev->non_compliant_bars)
+		return;
+
 	for (pos = 0; pos < howmany; pos++) {
 		struct resource *res = &dev->resource[pos];
 		reg = PCI_BASE_ADDRESS_0 + (pos << 2);
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index d111c8687..46497c6cb 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -640,6 +640,11 @@ static int hp_wmi_rfkill_setup(struct platform_device *device)
 	if (err)
 		return err;
 
+	err = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, &wireless,
+				   sizeof(wireless), 0);
+	if (err)
+		return err;
+
 	if (wireless & 0x1) {
 		wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
 					   RFKILL_TYPE_WLAN,
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index ec8ccdae7..0090de46a 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -898,6 +898,7 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
 		qeth_l2_set_offline(cgdev);
 
 	if (card->dev) {
+		netif_napi_del(&card->napi);
 		unregister_netdev(card->dev);
 		card->dev = NULL;
 	}
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index c1b0b2761..7366bef74 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3333,6 +3333,7 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev)
 		qeth_l3_set_offline(cgdev);
 
 	if (card->dev) {
+		netif_napi_del(&card->napi);
 		unregister_netdev(card->dev);
 		card->dev = NULL;
 	}
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 6a0d362e2..284efac5f 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -590,10 +590,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
 					}
 					return -EFAULT;
 				}
-				/* We used to udelay() here but that absorbed
-				 * a CPU when a timeout occured. Not very
-				 * useful. */
-				cpu_relax();
+				/*
+				 * Allow other processes / CPUS to use core
+				 */
+				schedule();
 			}
 		} else if (down_interruptible(&fibptr->event_wait)) {
 			/* Do nothing ... satisfy
@@ -1920,6 +1920,10 @@ int aac_command_thread(void *data)
 		if (difference <= 0)
 			difference = 1;
 		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (kthread_should_stop())
+			break;
+
 		schedule_timeout(difference);
 
 		if (kthread_should_stop())
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index a683a8315..022781308 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -2978,7 +2978,7 @@ be_sgl_create_contiguous(void *virtual_address,
 {
 	WARN_ON(!virtual_address);
 	WARN_ON(!physical_address);
-	WARN_ON(!length > 0);
+	WARN_ON(!length);
 	WARN_ON(!sgl);
 
 	sgl->va = virtual_address;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 25ac2c00f..2891faa8e 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9607,6 +9607,7 @@ static int ipr_probe_ioa(struct pci_dev *pdev,
 		ioa_cfg->intr_flag = IPR_USE_MSI;
 	else {
 		ioa_cfg->intr_flag = IPR_USE_LSI;
+		ioa_cfg->clear_isr = 1;
 		ioa_cfg->nvectors = 1;
 		dev_info(&pdev->dev, "Cannot enable MSI.\n");
 	}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 9acbc8852..5ba69ea8e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -898,7 +898,6 @@ static int scsi_request_sense(struct scsi_cmnd *scmd)
  */
 void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
 {
-	scmd->device->host->host_failed--;
 	scmd->eh_eflags = 0;
 	list_move_tail(&scmd->eh_entry, done_q);
 }
@@ -1892,6 +1891,9 @@ int scsi_error_handler(void *data)
 		else
 			scsi_unjam_host(shost);
 
+		/* All scmds have been handled */
+		shost->host_failed = 0;
+
 		/*
 		 * Note - if the above fails completely, the action is to take
 		 * individual devices offline and flush the queue of any
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9f3168e8e..60031e15d 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -546,66 +546,6 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
 
 static void __scsi_release_buffers(struct scsi_cmnd *, int);
 
-/*
- * Function:    scsi_end_request()
- *
- * Purpose:     Post-processing of completed commands (usually invoked at end
- *		of upper level post-processing and scsi_io_completion).
- *
- * Arguments:   cmd	 - command that is complete.
- *              error    - 0 if I/O indicates success, < 0 for I/O error.
- *              bytes    - number of bytes of completed I/O
- *		requeue  - indicates whether we should requeue leftovers.
- *
- * Lock status: Assumed that lock is not held upon entry.
- *
- * Returns:     cmd if requeue required, NULL otherwise.
- *
- * Notes:       This is called for block device requests in order to
- *              mark some number of sectors as complete.
- * 
- *		We are guaranteeing that the request queue will be goosed
- *		at some point during this call.
- * Notes:	If cmd was requeued, upon return it will be a stale pointer.
- */
-static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
-					  int bytes, int requeue)
-{
-	struct request_queue *q = cmd->device->request_queue;
-	struct request *req = cmd->request;
-
-	/*
-	 * If there are blocks left over at the end, set up the command
-	 * to queue the remainder of them.
-	 */
-	if (blk_end_request(req, error, bytes)) {
-		/* kill remainder if no retrys */
-		if (error && scsi_noretry_cmd(cmd))
-			blk_end_request_all(req, error);
-		else {
-			if (requeue) {
-				/*
-				 * Bleah.  Leftovers again.  Stick the
-				 * leftovers in the front of the
-				 * queue, and goose the queue again.
-				 */
-				scsi_release_buffers(cmd);
-				scsi_requeue_command(q, cmd);
-				cmd = NULL;
-			}
-			return cmd;
-		}
-	}
-
-	/*
-	 * This will goose the queue request function at the end, so we don't
-	 * need to worry about launching another command.
-	 */
-	__scsi_release_buffers(cmd, 0);
-	scsi_next_command(cmd);
-	return NULL;
-}
-
 static inline unsigned int scsi_sgtable_index(unsigned short nents)
 {
 	unsigned int index;
@@ -735,16 +675,9 @@ static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
  *
  * Returns:     Nothing
  *
- * Notes:       This function is matched in terms of capabilities to
- *              the function that created the scatter-gather list.
- *              In other words, if there are no bounce buffers
- *              (the normal case for most drivers), we don't need
- *              the logic to deal with cleaning up afterwards.
- *
- *		We must call scsi_end_request().  This will finish off
- *		the specified number of sectors.  If we are done, the
- *		command block will be released and the queue function
- *		will be goosed.  If we are not done then we have to
+ * Notes:       We will finish off the specified number of sectors.  If we
+ *		are done, the command block will be released and the queue
+ *		function will be goosed.  If we are not done then we have to
  *		figure out what to do next:
  *
  *		a) We can call scsi_requeue_command().  The request
@@ -753,7 +686,7 @@ static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
  *		   be used if we made forward progress, or if we want
  *		   to switch from READ(10) to READ(6) for example.
  *
- *		b) We can call scsi_queue_insert().  The request will
+ *		b) We can call __scsi_queue_insert().  The request will
  *		   be put back on the queue and retried using the same
  *		   command as before, possibly after a delay.
  *
@@ -857,12 +790,28 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	}
 
 	/*
-	 * A number of bytes were successfully read.  If there
-	 * are leftovers and there is some kind of error
-	 * (result != 0), retry the rest.
+	 * special case: failed zero length commands always need to
+	 * drop down into the retry code. Otherwise, if we finished
+	 * all bytes in the request we are done now.
 	 */
-	if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
-		return;
+	if (!(blk_rq_bytes(req) == 0 && error) &&
+	    !blk_end_request(req, error, good_bytes))
+		goto next_command;
+
+	/*
+	 * Kill remainder if no retrys.
+	 */
+	if (error && scsi_noretry_cmd(cmd)) {
+		blk_end_request_all(req, error);
+		goto next_command;
+	}
+
+	/*
+	 * If there had been no error, but we have leftover bytes in the
+	 * requeues just queue the command up again.
+	 */
+	if (result == 0)
+		goto requeue;
 
 	error = __scsi_error_from_host_byte(cmd, result);
 
@@ -984,7 +933,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	switch (action) {
 	case ACTION_FAIL:
 		/* Give up and fail the remainder of the request */
-		scsi_release_buffers(cmd);
 		if (!(req->cmd_flags & REQ_QUIET)) {
 			if (description)
 				scmd_printk(KERN_INFO, cmd, "%s\n",
@@ -994,12 +942,11 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 				scsi_print_sense("", cmd);
 			scsi_print_command(cmd);
 		}
-		if (blk_end_request_err(req, error))
-			scsi_requeue_command(q, cmd);
-		else
-			scsi_next_command(cmd);
-		break;
+		if (!blk_end_request_err(req, error))
+			goto next_command;
+		/*FALLTHRU*/
 	case ACTION_REPREP:
+	requeue:
 		/* Unprep the request and put it back at the head of the queue.
 		 * A new command will be prepared and issued.
 		 */
@@ -1015,6 +962,11 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 		__scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0);
 		break;
 	}
+	return;
+
+next_command:
+	__scsi_release_buffers(cmd, 0);
+	scsi_next_command(cmd);
 }
 
 static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 34d18dcfa..109a535b6 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -315,7 +315,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 		}
 
 		/* See if there is more data to send */
-		if (!xspi->remaining_bytes > 0)
+		if (xspi->remaining_bytes <= 0)
 			break;
 	}
 
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index 32950ad94..b30c41b3e 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -588,7 +588,7 @@ static ssize_t sca3000_read_frequency(struct device *dev,
 		goto error_ret_mut;
 	ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
 	mutex_unlock(&st->lock);
-	if (ret)
+	if (ret < 0)
 		goto error_ret;
 	val = ret;
 	if (base_freq > 0)
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index a9af1b9ae..1f6e09649 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -371,34 +371,22 @@ static void to_utf8(struct vc_data *vc, uint c)
 
 static void do_compute_shiftstate(void)
 {
-	unsigned int i, j, k, sym, val;
+	unsigned int k, sym, val;
 
 	shift_state = 0;
 	memset(shift_down, 0, sizeof(shift_down));
 
-	for (i = 0; i < ARRAY_SIZE(key_down); i++) {
-
-		if (!key_down[i])
+	for_each_set_bit(k, key_down, min(NR_KEYS, KEY_CNT)) {
+		sym = U(key_maps[0][k]);
+		if (KTYP(sym) != KT_SHIFT && KTYP(sym) != KT_SLOCK)
 			continue;
 
-		k = i * BITS_PER_LONG;
-
-		for (j = 0; j < BITS_PER_LONG; j++, k++) {
-
-			if (!test_bit(k, key_down))
-				continue;
+		val = KVAL(sym);
+		if (val == KVAL(K_CAPSSHIFT))
+			val = KVAL(K_SHIFT);
 
-			sym = U(key_maps[0][k]);
-			if (KTYP(sym) != KT_SHIFT && KTYP(sym) != KT_SLOCK)
-				continue;
-
-			val = KVAL(sym);
-			if (val == KVAL(K_CAPSSHIFT))
-				val = KVAL(K_SHIFT);
-
-			shift_down[val]++;
-			shift_state |= (1 << val);
-		}
+		shift_down[val]++;
+		shift_state |= BIT(val);
 	}
 }
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f10040a00..5e3f8c7e5 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1110,10 +1110,11 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg)
 
 static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 {
-	struct usbdevfs_connectinfo ci = {
-		.devnum = ps->dev->devnum,
-		.slow = ps->dev->speed == USB_SPEED_LOW
-	};
+	struct usbdevfs_connectinfo ci;
+
+	memset(&ci, 0, sizeof(ci));
+	ci.devnum = ps->dev->devnum;
+	ci.slow = ps->dev->speed == USB_SPEED_LOW;
 
 	if (copy_to_user(arg, &ci, sizeof(ci)))
 		return -EFAULT;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4819202bb..cc8ec875d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -239,6 +239,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 #define HUB_DEBOUNCE_STEP	  25
 #define HUB_DEBOUNCE_STABLE	 100
 
+static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
 #define usb_sndaddr0pipe()	(PIPE_CONTROL << 30)
@@ -1155,10 +1156,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -1355,6 +1366,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func3);
 			schedule_delayed_work(&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1375,6 +1387,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9d3044bde..c6cc52016 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -581,14 +581,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 		musb_writew(ep->regs, MUSB_TXCSR, 0);
 
 	/* scrub all previous state, clearing toggle */
-	} else {
-		csr = musb_readw(ep->regs, MUSB_RXCSR);
-		if (csr & MUSB_RXCSR_RXPKTRDY)
-			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
-				musb_readw(ep->regs, MUSB_RXCOUNT));
-
-		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
 	}
+	csr = musb_readw(ep->regs, MUSB_RXCSR);
+	if (csr & MUSB_RXCSR_RXPKTRDY)
+		WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+			musb_readw(ep->regs, MUSB_RXCOUNT));
+
+	musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
 
 	/* target addr and (for multipoint) hub addr/port */
 	if (musb->is_multipoint) {
@@ -948,9 +947,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
 	if (is_in) {
 		dma = is_dma_capable() ? ep->rx_channel : NULL;
 
-		/* clear nak timeout bit */
+		/*
+		 * Need to stop the transaction by clearing REQPKT first
+		 * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED
+		 * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2
+		 */
 		rx_csr = musb_readw(epio, MUSB_RXCSR);
 		rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, rx_csr);
 		rx_csr &= ~MUSB_RXCSR_DATAERROR;
 		musb_writew(epio, MUSB_RXCSR, rx_csr);
 
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index ed4949faa..64223a923 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -558,6 +558,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct usbhs_pipe *pipe;
 	int ret = -EIO;
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
 
 	/*
 	 * if it already have pipe,
@@ -566,7 +569,8 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	if (uep->pipe) {
 		usbhs_pipe_clear(uep->pipe);
 		usbhs_pipe_sequence_data0(uep->pipe);
-		return 0;
+		ret = 0;
+		goto usbhsg_ep_enable_end;
 	}
 
 	pipe = usbhs_pipe_malloc(priv,
@@ -594,6 +598,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 		ret = 0;
 	}
 
+usbhsg_ep_enable_end:
+	usbhs_unlock(priv, flags);
+
 	return ret;
 }
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a53974966..f9e43048e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -281,6 +281,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
+#define TELIT_PRODUCT_LE910_USBCFG4		0x1206
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -1214,6 +1215,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 7d7add5ce..148e8ea1b 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -177,6 +177,8 @@ static void leak_balloon(struct virtio_balloon *vb, size_t num)
 	num = min(num, ARRAY_SIZE(vb->pfns));
 
 	mutex_lock(&vb->balloon_lock);
+	/* We can't release more pages than taken */
+	num = min(num, (size_t)vb->num_pages);
 	for (vb->num_pfns = 0; vb->num_pfns < num;
 	     vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
 		page = balloon_page_dequeue(vb_dev_info);
diff --git a/drivers/xen/xen-acpi-processor.c b/drivers/xen/xen-acpi-processor.c
index 8abd7d579..2e4517277 100644
--- a/drivers/xen/xen-acpi-processor.c
+++ b/drivers/xen/xen-acpi-processor.c
@@ -426,36 +426,7 @@ upload:
 
 	return 0;
 }
-static int __init check_prereq(void)
-{
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (!xen_initial_domain())
-		return -ENODEV;
-
-	if (!acpi_gbl_FADT.smi_command)
-		return -ENODEV;
-
-	if (c->x86_vendor == X86_VENDOR_INTEL) {
-		if (!cpu_has(c, X86_FEATURE_EST))
-			return -ENODEV;
 
-		return 0;
-	}
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		/* Copied from powernow-k8.h, can't include ../cpufreq/powernow
-		 * as we get compile warnings for the static functions.
-		 */
-#define CPUID_FREQ_VOLT_CAPABILITIES    0x80000007
-#define USE_HW_PSTATE                   0x00000080
-		u32 eax, ebx, ecx, edx;
-		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
-		if ((edx & USE_HW_PSTATE) != USE_HW_PSTATE)
-			return -ENODEV;
-		return 0;
-	}
-	return -ENODEV;
-}
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance __percpu *acpi_perf_data;
 
@@ -511,10 +482,10 @@ static struct syscore_ops xap_syscore_ops = {
 static int __init xen_acpi_processor_init(void)
 {
 	unsigned int i;
-	int rc = check_prereq();
+	int rc;
 
-	if (rc)
-		return rc;
+	if (!xen_initial_domain())
+		return -ENODEV;
 
 	nr_acpi_bits = get_max_acpi_id() + 1;
 	acpi_ids_done = kcalloc(BITS_TO_LONGS(nr_acpi_bits), sizeof(unsigned long), GFP_KERNEL);
diff --git a/drivers/xen/xen-pciback/conf_space.c b/drivers/xen/xen-pciback/conf_space.c
index 75fe3d466..ba3fac831 100644
--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -183,8 +183,7 @@ int xen_pcibk_config_read(struct pci_dev *dev, int offset, int size,
 		field_start = OFFSET(cfg_entry);
 		field_end = OFFSET(cfg_entry) + field->size;
 
-		if ((req_start >= field_start && req_start < field_end)
-		    || (req_end > field_start && req_end <= field_end)) {
+		 if (req_end > field_start && field_end > req_start) {
 			err = conf_space_read(dev, cfg_entry, field_start,
 					      &tmp_val);
 			if (err)
@@ -230,8 +229,7 @@ int xen_pcibk_config_write(struct pci_dev *dev, int offset, int size, u32 value)
 		field_start = OFFSET(cfg_entry);
 		field_end = OFFSET(cfg_entry) + field->size;
 
-		if ((req_start >= field_start && req_start < field_end)
-		    || (req_end > field_start && req_end <= field_end)) {
+		 if (req_end > field_start && field_end > req_start) {
 			tmp_val = 0;
 
 			err = xen_pcibk_config_read(dev, field_start,