diff options
Diffstat (limited to 'MediaTek/fmradiolibs/autofm/fm_cust_cfg.h')
| -rw-r--r-- | MediaTek/fmradiolibs/autofm/fm_cust_cfg.h | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/MediaTek/fmradiolibs/autofm/fm_cust_cfg.h b/MediaTek/fmradiolibs/autofm/fm_cust_cfg.h new file mode 100644 index 0000000..1cc1d03 --- /dev/null +++ b/MediaTek/fmradiolibs/autofm/fm_cust_cfg.h @@ -0,0 +1,119 @@ +/* Copyright Statement: + * + * This software/firmware and related documentation ("MediaTek Software") are + * protected under relevant copyright laws. The information contained herein is + * confidential and proprietary to MediaTek Inc. and/or its licensors. Without + * the prior written permission of MediaTek inc. and/or its licensors, any + * reproduction, modification, use or disclosure of MediaTek Software, and + * information contained herein, in whole or in part, shall be strictly + * prohibited. + * + * MediaTek Inc. (C) 2014. All rights reserved. + * + * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES + * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") + * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER + * ON AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL + * WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED + * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR + * NONINFRINGEMENT. NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH + * RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, + * INCORPORATED IN, OR SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES + * TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. + * RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO + * OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN MEDIATEK + * SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE + * RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR + * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S + * ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE + * RELEASED HEREUNDER WILL BE, AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE + * MEDIATEK SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE + * CHARGE PAID BY RECEIVER TO MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. + * + * The following software/firmware and/or related documentation ("MediaTek + * Software") have been modified by MediaTek Inc. All revisions are subject to + * any receiver's applicable license agreements with MediaTek Inc. + */ + +#ifndef __FM_CUST_CFG_H__ +#define __FM_CUST_CFG_H__ + +//scan sort algorithm +enum{ + FM_SCAN_SORT_NON = 0, + FM_SCAN_SORT_UP, + FM_SCAN_SORT_DOWN, + FM_SCAN_SORT_MAX +}; + +//***************************************************************************************** +//***********************************FM config for customer: start****************************** +//***************************************************************************************** +//RX +#define FM_RX_RSSI_TH_LONG 0xFF01 //FM radio long antenna RSSI threshold(11.375dBuV) +#define FM_RX_RSSI_TH_SHORT 0xFEE0 //FM radio short antenna RSSI threshold(-1dBuV) +#define FM_RX_CQI_TH 0x00E9 //FM radio Channel quality indicator threshold(0x0000~0x00FF) +#define FM_RX_MR_TH 0x01BD //FM radio MR threshold +#define FM_RX_SEEK_SPACE 1 //FM radio seek space,1:100KHZ; 2:200KHZ +#define FM_RX_SCAN_CH_SIZE 40 //FM radio scan max channel size +#define FM_RX_BAND 1 //FM radio band, 1:87.5MHz~108.0MHz; 2:76.0MHz~90.0MHz; 3:76.0MHz~108.0MHz; 4:special +#define FM_RX_BAND_FREQ_L 875 //FM radio special band low freq(Default 87.5MHz) +#define FM_RX_BAND_FREQ_H 1080 //FM radio special band high freq(Default 108.0MHz) +#define FM_RX_SCAN_SORT_SELECT FM_SCAN_SORT_NON +#define FM_RX_FAKE_CH_NUM 1 +#define FM_RX_FAKE_CH_RSSI 40 +#define FM_RX_FAKE_CH_1 1075 +#define FM_RX_FAKE_CH_2 0 +#define FM_RX_FAKE_CH_3 0 +#define FM_RX_FAKE_CH_4 0 +#define FM_RX_FAKE_CH_5 0 +#define FM_RX_DEEMPHASIS 0 //0-50us, China Mainland; 1-75us China Taiwan +#define FM_RX_OSC_FREQ 0 //0-26MHz; 1-19MHz; 2-24MHz; 3-38.4MHz; 4-40MHz; 5-52MHz + +//TX +#define FM_TX_PWR_LEVEL_MAX 120 +#define FM_TX_SCAN_HOLE_LOW 923 //92.3MHz~95.4MHz should not show to user +#define FM_TX_SCAN_HOLE_HIGH 954 //92.3MHz~95.4MHz should not show to user + + +//***************************************************************************************** +//***********************************FM config for customer:end ******************************* +//***************************************************************************************** +// band +#define FM_BAND_UNKNOWN 0 +#define FM_BAND_UE 1 // US/Europe band 87.5MHz ~ 108MHz (DEFAULT) +#define FM_BAND_JAPAN 2 // Japan band 76MHz ~ 90MHz +#define FM_BAND_JAPANW 3 // Japan wideband 76MHZ ~ 108MHz +#define FM_BAND_SPECIAL 4 // special band between 76MHZ and 108MHz +#define FM_BAND_DEFAULT FM_BAND_UE +#define FM_FREQ_MIN FM_RX_BAND_FREQ_L +#define FM_FREQ_MAX FM_RX_BAND_FREQ_H +#define FM_RAIDO_BAND FM_BAND_UE +// space +#define FM_SPACE_UNKNOWN 0 +#define FM_SPACE_100K 1 +#define FM_SPACE_200K 2 +#define FM_SPACE_DEFAULT FM_RX_SEEK_SPACE +#define FM_SEEK_SPACE FM_RX_SEEK_SPACE +//max scan chl num +#define FM_MAX_CHL_SIZE FM_RX_SCAN_CH_SIZE +// auto HiLo +#define FM_AUTO_HILO_OFF 0 +#define FM_AUTO_HILO_ON 1 +// seek direction +#define FM_SEEK_UP 0 +#define FM_SEEK_DOWN 1 + +#define FM_CHIP_AR1000 0x1000 +#define FM_CHIP_MT5192 0x91 +#define FM_CHIP_MT5193 0x92 +#define FM_CHIP_MT6616 0x6616 +#define FM_CHIP_MT6626 0x6626 +#define FM_CHIP_MT6628 0x6628 +#define FM_CHIP_MT6620 0x6620 +#define FM_CHIP_UNSUPPORTED 0xffff + +// seek threshold +#define FM_SEEKTH_LEVEL_DEFAULT 4 + +#endif // __FM_CUST_CFG_H__ |