sdcc/debugger
SDCDB debugger - Development notes.
======================
ddd - Notes from Martin Helmling, May 23, 2003
========================
Additionally following new commands work:
ignore <breakpointnumber> <ignorecount> - ignore the breakpoint n times
condition <breakpointnumber> <variable> <|>|<=|>=|==|!= <constant> - break condition
commands - see gdb description -
ddd - Notes from Martin Helmling, April 28, 2003
========================
To fullfill the requirements of 'ddd' ( Data Display Debugger ) to use it at
graphical frontend to 'sdcdb' some new commands must be implemented.
Now you can run the ddd with the commandline
ddd -debugger 'sdcdb -cpu 8032 <file>'
Following commands are additional implemented:
1. execution:
stepi - Step one instruction exactly using simulator 'step' command.
nexti - Step one instruction, but proceed through subroutine calls using simulator 'next' command.
break *<addr> - Set breakpoint at program address
log examples:
-> "stepi\n"
<- "Simulator stopped at Address 0x0051\n"
"\032\032x.c:31:1:beg:0x00000051\n"
"(sdcdb) "
-> "nexti\n"
<- "Simulator stopped at Address 0x0055\n"
"\032\032x.c:33:1:beg:0x00000055\n"
"(sdcdb) "
2. show machine code window:
x /i - disassemble one asm command
x disassemble asm commands
log examples:
-> "x /i 0x00000055\n"
<- "0x00000055 <main+6>:\t\tmov\tr0,#_l\n"
"(sdcdb) "
-> "disassemble 0x00000055\n"
<- "Dump of assembler code for function main:\n"
"0x0000004f <main>:\t\tmov\tr0,#_ttt\n"
"0x00000051 <main+2>:\t\tmov\t@r0,#0x01\n"
<- "0x00000053 <main+4>:\t\tmov\tr2,#0x09\n"
"0x00000055 <main+6>:\t\tmov\tr0,#_l\n"
...
"0x000000c1 <main+114>:\t\tret\n"
"End of assembler dump.\n"
"(sdcdb) "
-> "disassemble 0x40 0x45\n"
<- "Dump of assembler code from 0x00000040 to 0x00000045:\n"
"0x00000040 <subfunc1+8>:\t\tinc\tr0\n"
"0x00000041 <subfunc1+9>:\t\tmov\t@r0,ar3\n"
"0x00000043 <subfunc1+11>:\t\tmov\ta,r3\n"
"0x00000044 <subfunc1+12>:\t\trlc\ta\n"
"0x00000045 <subfunc1+13>:\t\tsubb\ta,acc\n"
"End of assembler dump.\n"
"(sdcdb) "
-> "break x.c:23\n"
<- "Breakpoint 1 at 0x4b: file x.c, line 23.\n"
"(sdcdb) "
-> "info breakpoints\n"
<- "Num Type Disp Enb Address What\n"
"1 breakpoint keep y 0x0000004b at x.c:23\n"
"(sdcdb) "
->
3. show registers and stack
frame - print information about the current Stack
where - print stack
up - Select and print stack frame that called this one
down - Select and print stack frame that called this one
info registers - show registers
info all-registers - show also special these function registers,
which are symbolical defined.
help <cmd> show short help for ddd tooltip info
log examples:
-> "where\n"
<- "#0 0x0000004b in subfunc1 () at x.c:23\n"
"#1 0x0000004f in main () at x.c:31\n"
"(sdcdb) "
-> "frame\n"
<- "#0 0x0000004b in subfunc1 () at x.c:23\n"
"\032\032x.c:23:1:beg:0x0000004b\n"
"(sdcdb) "
-> "up\n"
<- "#1 0x0000004f in main () at x.c:31\n"
"\032\032x.c:31:1:beg:0x0000004f\n"
"(sdcdb) "
-> "frame\n"
<- "#1 0x0000004f in main () at x.c:31\n"
"\032\032x.c:31:1:beg:0x0000004f\n"
"(sdcdb) "
-> "down\n"
<- "#0 0x0000004b in subfunc1 () at x.c:23\n"
"\032\032x.c:23:1:beg:0x0000004b\n"
"(sdcdb) "
-> "frame\n"
<- "#0 0x0000004b in subfunc1 () at x.c:23\n"
"\032\032x.c:23:1:beg:0x0000004b\n"
"(sdcdb) "
-> "info registers\n"
<- "R0 : 0x87 135 .\n"
"R1 : 0x00 0 .\n"
"R2 : 0x05 5 .\n"
"R3 : 0x00 0 .\n"
"R4 : 0x00 0 .\n"
"R5 : 0x08 8 .\n"
"R6 : 0x00 0 .\n"
"ACC : 0x00 0 .\n"
"B : 0x00 0 .\n"
"DPTR: 0x0005 5\n"
"@DPTR: 0x00 0 .\n"
"PSW : 0x00 | CY : 0 | AC : 0 | OV : 0 | P : 0\n"
"(sdcdb) "
# Showing all registers.
-> "info all-registers\n"
<- "R0 : 0x87 135 .\n"
"R1 : 0x00 0 .\n"
"R2 : 0x05 5 .\n"
"R3 : 0x00 0 .\n"
"R4 : 0x00 0 .\n"
"R5 : 0x08 8 .\n"
"R6 : 0x00 0 .\n"
"ACC : 0x00 0 .\n"
"B : 0x00 0 .\n"
"DPTR: 0x0005 5\n"
"@DPTR: 0x00 0 .\n"
"PSW : 0x00 | CY : 0 | AC : 0 | OV : 0 | P : 0\n"
"Special Function Registers:\n"
<- "P0=0xff P0_0=1 P0_1=1 P0_2=1 P0_3=1\n"
"SP=0x13\n"
"(sdcdb) "
-> "help step\n"
<- "Step program until it reaches a different source line.\n"
"(sdcdb) "
-> "help stepi\n"
<- "Step one instruction exactly.\n"
"(sdcdb) "
4. show and set variables:
output [/<fmt>] <expr1> print value of <expr1> without newline for tooltip of ddd
print [/<fmt>] <expr1> print value of <expr1> with newline
display [/<fmt>] <expr1> print value of <expr1> every time the program is stopped
or 'display' command without args is used.
set variable <expr1> = <value>
<fmt> is the format for the basic type which is print out.
If no format is set the default format is used.
format is set by ddd 'x' as hex 'o' as octal, 'd' as dezimal and 't' as binary.
<expr1> can by a variable , a array element , a structure element ( [] and . is parsed ).
indices of arrays may be constants or variables.
( dereference of pointers and casting today not implemented !! )
log examples:
code:
typedef unsigned char uchar;
idata long l;
typedef struct _txstate
{
uchar dstatus[4];
uchar avalue [8 ];
} txstate_t;
xdata txstate_t txstates[8];
-> "output l\n"
<- "5(sdcdb) "
-> "display l\n"
<- "(sdcdb) "
-> "display /x l\n"
<- "(sdcdb) "
-> "display\n"
<- "2: /x l = 0x00000005\n"
"1: l = 5\n"
"(sdcdb) "
-> "display /o l\n"
<- "(sdcdb) "
-> "display\n"
<- "3: /o l = 00000000005\n"
"2: /x l = 0x00000005\n"
"1: l = 5\n"
"(sdcdb) "
-> "display /d l\n"
<- "(sdcdb) "
-> "display\n"
<- "4: /d l = 5\n"
"3: /o l = 00000000005\n"
"2: /x l = 0x00000005\n"
"1: l = 5\n"
"(sdcdb) "
-> "display /t l\n"
<- "(sdcdb) "
-> "display\n"
<- "5: /t l = 00000000000000000000000000000101\n"
"4: /d l = 5\n"
"3: /o l = 00000000005\n"
"2: /x l = 0x00000005\n"
"1: l = 5\n"
"(sdcdb) "
-> "output l\n"
<- "5(sdcdb) "
-> "print txstates\n"
<- "$2 = { { dstatus = {\'\\1\',\'\\0\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\'}},
{ dstatus = {\'\\0\',\'\\2\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\'}},
{ dstatus = {\'\\0\',\'\\0\',\'\\375\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\'}},
{ dstatus = {\'\\0\',\'\\0\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\4\',\'\\0\',\'\\0\',\'\\0\',\
'\\0\'}}, { dstatus = {\'\\0\',\'\\0\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\'}},
{ dstatus = {\'\\0\',\'\\0\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\'}},
{ dstatus = {\'\\0\',\'\\0\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\'}},
{ dstatus = {\'\\0\',\'\\0\',\'\\0\',\'\\0\'},
avalue = {\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\0\',\'\\
0\'}}}\n"
"(sdcdb) "
-> "print txstates[1].dstatus[1]\n"
<- "$5 = \'\\2\'\n"
"(sdcdb) "
-> "print /x txstates[1].dstatus[1]\n"
<- "$7 = 0x02\n"
-> "output txstates[1].dstatus[1]\n"
<- "\'\\2\'(sdcdb) "
-> "set variable txstates[1].dstatus[1] = 0x10\n"
<- "(sdcdb) "
-> "print /t txstates[1].dstatus[1]\n"
<- "$9 = 00010000\n"
-> "print /x txstates[1].dstatus[1]\n"
<- "$10 = 0x10\n"
-> "output l\n"
<- "5(sdcdb) "
-> "set variable l = 2\n"
<- "(sdcdb) "
-> "print l\n"
<- "$15 = 2\n"
-> "print /x txstates[l].dstatus[2]\n"
<- "$16 = 0xfd\n"
---------------------------------------------------
Implementation Notes:
IMEM and XMEM are cached to optimize the printaut of structures and arrays
Notes April 23, 2003
========================
Martin Helmling added support for ddd GUI debugger.
Code added to display assembly, set variables, and other commands
to interface to ddd.
From Martins email:
in the attachment is my actual patch.
The 'up' and 'down' stack commands are not implemented.
But the features for 'ddd' to see bopth the c source and the assembler
works,
also the display of variables.
Set variables are only implemented for basic types.
Register variables can also displayed, but here I think a problem in the
*.cdb file exists.
Sometimes the register name not exists:
S:LcacheTxAnalogValue$offset$1$1({1}SC:U),E,0,0
S:LcacheTxAnalogValue$i$1$1({1}SC:S),R,0,0,[]
S:LcacheTxAnalogValue$val$1$1({4}ST__00020000:S),E,0,0
S:LcacheTxAnalogValue$value$1$1({1}SC:U),R,0,0,[]
S:LcacheTxAnalogValue$sloc0$1$0({4}SL:U),E,0,0
S:LsetRelays$addr$1$1({1}SC:U),R,0,0,[r2]
S:LsetRelays$state$1$1({1}SC:U),R,0,0,[r3]
S:LsetRelays$value$1$1({1}SC:U),R,0,0,[r5]
S:L_main$i$1$1({1}SC:U),R,0,0,[]
S:L_main$j$1$1({1}SC:U),R,0,0,[r3]
S:L_main$ok$1$1({1}SC:U),R,0,0,[r3]
the empty [] I mean !!
Is this a known bug in sdcc ?
Also sometimes not the correct breakpoints for stepping found in sdcdb.
I try to fix this tomorrow.
Additional patches and notes from Martin(4-24-03):
in the attachment you found three patches:
debugpatch: Only for debugging, you can switch on and off the 4 different
debug and you can grep the debug by the prefix.
signalpatch:Now the simulator stops if the user sends an interrupt
( or 'ddd' ) and also the simulator does not die by another
user signal.
sympatch: This is not a feature, THIS is the fix of a BUG !!!
In some circumstances in the *.cdb file the Symbol record
comes before the function record. So the symbol was
generated TWO TIMES in the symbol list. The L:G and L:XG
records then insert entry and exit address to the wrong
symbol. So before a new symbol is generated for the
function, a lookup in the symboltable is done.
Example of a *.cdb:
S:G$ZpuInitialize$0$0({2}DF,SV:S),C,0,0
S:G$ZpuInitialize$0$0({2}DF,SV:S),C,0,0
F:G$ZpuInitialize$0$0({2}DF,SV:S),Z,0,0,0,0,0
S:LZpuInitialize$i$1$1({2}SI:S),R,0,0,[]
L:G$ZpuInitialize$0$0:ADF
L:XG$ZpuInitialize$0$0:BBB
Notes Feb 10, 2002 - Karl Bongers
========================
SDCDB is a debugger for SDCC compiler. It works as a front
end to the ucSim simulator/disassembler program.
WARNING: SDCDB is EXPERIMENTAL and NOT A FULLY FUNCTIONING TOOL.
SDCDB does hold out promise for a nice debugger tool that
could integrate well with ucSim and other SDCC tools. It has
some nice functionality that could augment ucSim nicely.
It reads in a lot of symbolic information from the .CDB
debug files as well as the source code and assembly
listings referred to in these CDB files.
This can be used to display your program data, list
c or asm source code and set breakpoints.
Unfortunately, SDCDB is not quite finished and does not
function well enough yet to recommend for general use.
Usage Notes
======================
Compile with --debug option:
sdcc --debug hi.c
This should generate .cdb symbolic debug files.
Load sdcdb, like this:
sdcdb hi.ihx
Then you need to do an initial "run" command. It should hopefully
stop somewhere at the main() entrypoint.
Now you should be able to list code, and set breakpoints. Type
"c" to continue running to a breakpoint, or type "s" to single
step or "n" to skip function calls. Tpye "help" for a summary
of commands.
Use a preceeding bang("!") to do s51 simulator commands. So for
example:
!pc
will send the "pc" command to ucSim and
give you the program counter and list the current line of assembly.
!help
will give you the brief command line help listing of ucSim. But
this help will scroll of the screen. So to get a list, I redirect
stdout to a text file to examine like this:
sdcdb hi.ihx 2>&1 | tee sdcdb.log
Type '.' to toggle to a full time ucSim prompt.
SDCDB problem areas.
======================
Ok, so what are some of its problems? Lets try to itemize
them so we can fix them:
* It hangs sometimes when trying to do step or next.
This probably has something to do with the context
sdcdb tries to build dynamically. Sdcdb tries to
trace program operation by placing hidden breakpoints
and stepping threw the simulation between these.
* Does not print variables properly. Seems to use the
wrong address for the variable. (fixed)
* ASM listing not implemented.
This should be easy enough to add. This feature
really needs to be implemented before this is a useful
tool. That or addresses of code functions need to be
readily available for raw ucSim commands.
* No way to browse symbols, files names.
Preferably, it is easy to learn the addresses of variables
and functions too.
(working on this... see new ls,lm,lf commands)
* Does not allow listing, setting breakpoints or viewing variables
before starting the simulation.
(I am fixing now, partly fixed)
* p codestr - print on code char * broken, could be CDB info invalid.
Changes Made
======================
Added a -z option. Any options after -z on sdcdb invocation line
are passed directly to ucSim.
Fixed print basic variable command(was not parsing or expecting
"0x" in data coming from ucSim). Dump bit command changed from
"db" to "dump".
Add support for the following alternative ucSim binaries:
-mz80 - use "uz80" simulator.
-mavr - use "uavr" simulator.
-mxa - use "uxa" simulator.
Note that Z80(and probably avr/xa) does not produce enough
CDB debugging information to
make SDCDB useful. Hopefully CDB support will be
added to these other linkers and code generators.
Added lf,lm,ls commands(list functions, list modules, list symbols).
This allows browsing some the CDB information SDCDB pulls in
to do the wonderful things it does.
Added '.' prefix/command, used alone switches back and forth
from ucSim/SDCDB command mode). Also when at the (ucsim) prompt,
if a command is prefixed with '.' it will route the command to
the SDCDB command processor. (This could obsolete the '!' prefix).
======================
Fix any remaining shortcomings above and make sdcdb integrate better with
ucSim.
Concerning the hanging on next/step instructions: This is critical
to fix. I beleive the problem is related to SDCDB's attempt to
dynamically track context. To do this, it sets many temporary break
points and uses these to progress step by step through the source code.
It does not seem reliable. It might be an idea to offer a simplified
mode of stepping and breakpoints. Need to study this more.
Make SDCDB integrate better with ucSim.
I think if sdcdb can act more transparently in regard to ucSim
it would be used more. So stress adding value and enhancing
ucSim operation, and not block or hide the functionality of ucSim.
* combine print "p" & "pt" together. We have room on the screen,
might as well print its type, address and value in one command.
* "fr" command prints the current position in the C code.
Should also print the raw code address for dumping ucSim code.
Developer Notes:
======================
To debug, it might be helpful to turn on verbose debug dumps
by uncommenting #define SDCDB_DEBUG in sdcdb.h.
Some basic layout:
sdcdb.c - main shell of the program.
cmd.c - process user commands typed in.
simi.c - handle talking to the simulator via a socket connection.
symtab.c - Misc. functions to translate and process linked list
structures(modules, functions, symbols, etc) and CDB file
parsing.
break.c - track and implement break points.
Understanding the structures and access mechanisms of SDCDB
is a bit of work. The structures include generic linked list
and function access. These lists are accessed in part by the
functions from ../../src/SDCCset.c and SDCChash.c. See the
cmd.c:infoSymbols() routine to gain some insight into these
main program structures. Or type "info symbols" to dump
out some of these. The new ls,lm,lf commands are also based
on showing information about these lists of structures.
Generic functions are used to act on these linked lists of
structures. For example, in cmd.c, DEFSETFUNC(funcWithName)
function will find a function structure with a given name.
So the linked list of function structures(with the head
"functions") is traversed and when one is found with a matching
name, a pointer to the function structure is returned.
The src/SDCCset.c,SDCCset.h contain much of the core helper
routines to allowed to implement these linked list access
functions.
The dynamic context tracking is difficult to understand.
It has some concept of stack use, as in
cmd.c:printSymValue(), where it can print variables relative
to the stack pointer.
Xavi Del Campo
53953142e7