# Binary Encoding

This document describes the [portable](Portability.md) binary encoding of the WebAssembly modules.

The binary encoding is a dense representation of module information that enables 
small files, fast decoding, and reduced memory usage.
See the [rationale document](Rationale.md#why-a-binary-encoding) for more detail.

The encoding is split into three layers:

* **Layer 0** is a simple pre-order encoding of the AST and related data structures.
  The encoding is dense and trivial to interact with, making it suitable for
  scenarios like JIT, instrumentation tools, and debugging.
* **Layer 1** provides structural compression on top of layer 0, exploiting
  specific knowledge about the nature of the syntax tree and its nodes.
  The structural compression introduces more efficient encoding of values, 
  rearranges values within the module, and prunes structurally identical
  tree nodes.
* **Layer 2** Layer 2 applies generic compression algorithms, like [gzip](http://www.gzip.org/) and [Brotli](https://datatracker.ietf.org/doc/draft-alakuijala-brotli/), that are already available in browsers and other tooling.

Most importantly, the layering approach allows development and standardization to
occur incrementally. For example, Layer 1 and Layer 2 encoding techniques can be
experimented with by application-level decompressing to the layer below. As 
compression techniques  stabilize, they can be standardized and moved into native 
implementations.

# Data types

### int8
A single-byte signed integer.

### uint8
A single-byte unsigned integer.

### uint16
A two-byte little endian unsigned integer.

### uint32
A four-byte little endian unsigned integer.

### varint32
A [Signed LEB128](https://en.wikipedia.org/wiki/LEB128#Signed_LEB128) variable-length integer, limited to int32 values.

### varuint32
A [LEB128](https://en.wikipedia.org/wiki/LEB128) variable-length integer, limited to uint32 values. `varuint32` values may contain leading zeros.

### varint64
A [Signed LEB128](https://en.wikipedia.org/wiki/LEB128#Signed_LEB128) variable-length integer, limited to int64 values.

### value_type
A single-byte unsigned integer indicating a [value type](AstSemantics.md#types). These types are encoded as:
* `1` indicating type `i32` 
* `2` indicating type `i64` 
* `3` indicating type `f32` 
* `4` indicating type `f64`


# Definitions

### Pre-order encoding
Refers to an approach for encoding syntax trees, where each node begins with an identifying binary
sequence, then followed recursively by any child nodes. 

* Examples
  * Given a simple AST node: `I32Add(left: AstNode, right: AstNode)`
    * First write the opcode for `I32Add` (uint8)
    * Then recursively write the left and right nodes.

  * Given a call AST node: `Call(callee_index: uint32_t, args: AstNode[])`
    * First write the opcode of `Call` (uint8)
    * Then write the (variable-length) integer `callee_index` (varuint32)
    * Then recursively write each argument node, where arity is determined by looking up `callee_index` in a table of signatures

# Module structure

The following documents the current prototype format. This format is based on and supersedes the v8-native prototype format, originally in a [public design doc](https://docs.google.com/document/d/1-G11CnMA0My20KI9D7dBR6ZCPOBCRD0oCH6SHCPFGx0/edit?usp=sharing).

## High-level structure

The module starts with a magic number and version as follows.

| Field | Type | Description |
| ----- |  ----- | ----- |
| magic number | `uint32` |  Magic number `0x6d736100` (i.e., '\0asm') |
| version | `uint32` | Version number, currently 10. The version for MVP will be reset to 1. |

This is followed by a sequence of sections. Sections can in general be repeated, but some can occur only once or have dependent sections that must preceed them but not immediately as unknown sections can occur in any order. Each section is identified by an immediate string. Sections whose identity is unknown to the WebAssembly implementation are ignored and this is supported by including the size in bytes for all sections. The encoding of all sections begins as follows:

| Field | Type | Description |
| ----- |  ----- | ----- |
| size  | `varuint32` | size of this section in bytes, excluding this size |
| id_len | `varuint32` | section identifier string length |
| id_str | `bytes` | section identifier string of id_len bytes |

### Memory section

ID: `memory`

The memory section declares the size and characteristics of the memory associated with the module.
A module may contain at most one memory section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| min_mem_pages | `varuint32` | minimize memory size in 64KiB pages |
| max_mem_pages | `varuint32` | maximum memory size in 64KiB pages |
| exported | `uint8` | `1` if the memory is visible outside the module |

### Signatures section

ID: `signatures`

The signatures section declares all function signatures that will be used in the module.
A module may contain at most one signatures section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of signature entries to follow |
| entries | `signature_entry*` | repeated signature entries as described below |

#### Signature entry
| Field | Type | Description |
| ----- |  ----- | ----- |
| param_count | `uint8` | the number of parameters to the function |
| return_type | `value_type?` | the return type of the function, with `0` indicating no return type |
| param_types | `value_type*` | the parameter types of the function |

### Import table section

ID: `import_table`

The import section declares all imports that will be used in the module.
A module may contain at most one import table section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of import entries to follow |
| entries | `import_entry*` | repeated import entries as described below |

#### Import entry
| Field | Type | Description |
| ----- |  ----- | ----- |
| sig_index | `uint16` | signature index of the import |
| module_len | `varuint32` | module string length |
| module_str | `bytes` | module string of `module_len` bytes |
| function_len | `varuint32` | function string length |
| function_str | `bytes` | function string of `function_len` bytes |

### Functions section

ID: `functions`

The Functions section declares the functions in the module and must be preceded by a [Signatures](#signatures-section) section. A module may contain at most one functions section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of function entries to follow |
| entries | `function_entry*` | repeated function entries as described below |

#### Function Entry

Each function entry describes a function that can be optionally named, imported and/or exported. Non-imported functions
must contain a function body. Imported and exported functions must have a name. Imported functions do not contain a body.

| Field | Type |  Present?  | Description |
| ----- |  ----- |  ----- |  ----- |
| flags | `uint8` | always | flags indicating attributes of a function <br>bit `1` : the function is an import<br>bit `2` : the function has local variables<br>bit `3` : the function is an export |
| signature | `uint16` | always | index into the Signature section |
| body size | `uint16` | `flags[0] == 0` | size of function body to follow, in bytes |
| body | `bytes` | `flags[0] == 0` | function body |

### Export Table section

ID: `export_table`

The export table section declares all exports from the module.
A module may contain at most one export table section.
This section must be preceded by a [Functions](#functions-section) section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of export entries to follow |
| entries | `export_entry*` | repeated export entries as described below |

#### Export entry
| Field | Type | Description |
| ----- |  ----- | ----- |
| sig_index | `uint16` | signature index of the export |
| func_index | `uint16` | index into the function table |
| function_len | `varuint32` | function string length |
| function_str | `bytes` | function string of `function_len` bytes |

### Start Function section

ID: `start_function`

A module may contain at most one start fuction section.
This section must be preceded by a [Functions](#functions-section) section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| index | `varuint32` | start function index |

### Data Segments section

ID: `data_segments`

The data segemnts section declares the initialized data that should be loaded into the linear memory.
A module may only contain one data segments section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of data segments to follow |
| entries | `data_segment*` | repeated data segments as described below |

* ```varuint32```: The number of data segments in the section.
* For each data segment:
  - ```uint32```: The base address of the data segment in memory.
  - ```uint32```: The offset of the data segment's data in the file.
  - ```uint32```: The size of the data segment (in bytes)
  - ```uint8```: ```1``` if the segment's data should be automatically loaded into memory at module load time.

### Indirect Function Table section

ID: `function_table`

The indirect function table section declares the size and entries of the indirect function table, which consist
of indexes into the [Functions](#functions-section) section.
This section must be preceded by a [Functions](#functions-section) section.

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of entries to follow |
| entries | `uint16*` | repeated indexes into the function table |

### Names section

ID: `names`

This section may occur 0 or 1 times and does not change execution semantics. A
validation error in this section does not cause validation for the whole module
to fail and is instead treated as if the section was absent. The expectation is
that, when a binary WebAssembly module is viewed in a browser or other
development environment, the names in this section will be used as the names of
functions and locals in the [text format](TextFormat.md).

| Field | Type | Description |
| ----- |  ----- | ----- |
| count | `varuint32` | count of entries to follow |
| entries | `function_names*` | sequence of names |

The sequence of `function_name` assigns names to the corresponding
function index. The count may be greater or less than the actual number of
functions.

#### Function names

| Field | Type | Description |
| ----- |  ----- | ----- |
| fun_name_len | `varuint32` | string length, in bytes |
| fun_name_str | `bytes` | valid utf8 encoding |
| local_count | `varuint32` | count of local names to follow |
| local_names | `local_name*` | sequence of local names |

The sequence of `local_name` assigns names to the corresponding local index. The
count may be greater or less than the actual number of locals.

#### Local name

| Field | Type | Description |
| ----- |  ----- | ----- |
| local_name_len | `varuint32` | string length, in bytes |
| local_name_str | `bytes` | valid utf8 encoding |

### End section

ID: `end`

This indicates the end of the sections. Additional data that follows this section marker is not interpreted
by the decoder. It can used, for example, to store function names or data segment bodies.

| Field | Type | Description |
| ----- |  ----- | ----- |

### Unknown sections

| Field | Type | Description |
| ----- |  ----- | ----- |
| body  | `bytes`     | contents of this section |

Sections whose ID is unknown to the WebAssembly implementation are ignored.

# Function Bodies

Function bodies consist of a sequence of local variable declarations followed by a 
dense pre-order encoding of an [Abstract Syntax Tree](AstSemantics.md).
Each node in the abstract syntax tree corresponds to an operator, such as `i32.add` or `if` or `block`.
Operators are encoding by an opcode byte followed by immediate bytes (if any), followed by children 
nodes (if any).

| Name | Opcode |Description |
| ----- | ----- | ----- |
| local count | `varuint32` | number of local entries |
| locals | `local_entry*` | local variables |
| ast    | `byte*` | pre-order encoded AST |

#### Local Entry

Each local entry declares a number of local variables of a given type.
It is legal to have several entries with the same type.

| Field | Type | Description |
| ----- | ----- | ----- |
| count | `varuint32` | number of local variables of the following type |
| type | `value_type` | type of the variables |


## Control flow operators ([described here](AstSemantics.md#control-flow-structures))

| Name | Opcode | Immediate | Description |
| ---- | ---- | ---- | ---- |
| `nop` | `0x00` | | no operation |
| `block` | `0x01` | count = `uint8` | a sequence of expressions, the last of which yields a value |
| `loop` | `0x02` | count = `uint8` | a block which can also form control flow loops |
| `if` | `0x03` | | high-level one-armed if |
| `if_else` | `0x04` | | high-level two-armed if |
| `select` | `0x05` | | select one of two values based on condition |
| `br` | `0x06` | relative_depth = `uint8` | break that targets a outer nested block |
| `br_if` | `0x07` | relative_depth = `uint8` | conditional break that targets a outer nested block |
| `br_table` | `0x08` | see below | branch table control flow construct |
| `return` | `0x14` | | return zero or one value from this function |
| `unreachable` | `0x15` | | trap immediately |

The `br_table` operator has an immediate operand which is encoded as follows:

| Field | Type | Description |
| ---- | ---- | ---- |
| target_count | `uint16` | number of targets in the target_table |
| target_table | `uint16*` | target entries that indicate an outer block or loop to which to break |
| default_target | `uint16` | an outer block or loop to which to break in the default case |

The `br_table` operator implements an indirect branch. It accepts one `i32` expression as input and 
branches to the block or loop at the given offset within the `target_table`. If the input value is 
out of range, `br_table` branches to the default target.

## Basic operators ([described here](AstSemantics.md#constants))
| Name | Opcode | Immediate | Description |
| ---- | ---- | ---- | ---- |
| `i32.const` | `0x0a` | value = `varint32` | a constant value interpreted as `i32` |
| `i64.const` | `0x0b` | value = `varint64` | a constant value interpreted as `i64` |
| `f64.const` | `0x0c` | value = `uint64` | a constant value interpreted as `f64` |
| `f32.const` | `0x0d` | value = `uint32` | a constant value interpreted as `f32` |
| `get_local` | `0x0e` | local_index = `varuint32` | read a local variable or parameter |
| `set_local` | `0x0f` | local_index = `varuint32` | write a local variable or parameter |
| `load_global` | `0x10` | index = `varuint32` | * nonstandard internal opcode |
| `store_global` | `0x11` | index = `varuint32` | * nonstandard internal opcode |
| `call` | `0x12` | function_index = `varuint32` | call a function by its index |
| `call_indirect` | `0x13` | signature_index = `varuint32` | call a function indirect with an expected signature |
| `call_import` | `0x1f` | import_index = `varuint32` | call an imported function by its index |

## Memory-related operators ([described here](AstSemantics.md#linear-memory-accesses))

| Name | Opcode | Immediate | Description |
| ---- | ---- | ---- | ---- |
| `i32.load8_s` | `0x20` | `memory_immediate` | load from memory |
| `i32.load8_u` | `0x21` | `memory_immediate` | load from memory  |
| `i32.load16_s` | `0x22` | `memory_immediate` | load from memory |
| `i32.load16_u` | `0x23` | `memory_immediate` | load from memory |
| `i64.load8_s` | `0x24` | `memory_immediate` | load from memory |
| `i64.load8_u` | `0x25` | `memory_immediate` | load from memory |
| `i64.load16_s` | `0x26` | `memory_immediate` | load from memory |
| `i64.load16_u` | `0x27` | `memory_immediate` | load from memory |
| `i64.load32_s` | `0x28` | `memory_immediate` | load from memory |
| `i64.load32_u` | `0x29` | `memory_immediate` | load from memory |
| `i32.load` | `0x2a` | `memory_immediate` | load from memory |
| `i64.load` | `0x2b` | `memory_immediate` | load from memory |
| `f32.load` | `0x2c` | `memory_immediate` | load from memory |
| `f64.load` | `0x2d` | `memory_immediate` | load from memory |
| `i32.store8` | `0x2e` | `memory_immediate` | store to memory |
| `i32.store16` | `0x2f` | `memory_immediate` | store to memory |
| `i64.store8` | `0x30` | `memory_immediate` | store to memory |
| `i64.store16` | `0x31` | `memory_immediate` | store to memory |
| `i64.store32` | `0x32` | `memory_immediate` | store to memory |
| `i32.store` | `0x33` | `memory_immediate` | store to memory |
| `i64.store` | `0x34` | `memory_immediate` | store to memory |
| `f32.store` | `0x35` | `memory_immediate` | store to memory |
| `f64.store` | `0x36` | `memory_immediate` | store to memory |
| `memory_size` | `0x3b` |  | query the size of memory |
| `grow_memory` | `0x39` |  | grow the size of memory |

The `memory_immediate` type is encoded as follows:

| Name | Type | Present? | Description |
| ---- | ---- | ---- | ---- |
| flags | `uint8` | always | a bitfield where<br>bit `4` indicates an offset follows<br>bit `7` indicates natural alignment<br>other bits are reserved for future use |
| offset | `varuint32` | `flags[4] == 1` | the value of the offset |

## Simple operators ([described here](AstSemantics#32-bit-integer-operators))

| Name | Opcode | Immediate | Description |
| ---- | ---- | ---- | ---- |
| `i32.add` | `0x40` | | |
| `i32.sub` | `0x41` | | |
| `i32.mul` | `0x42` | | |
| `i32.div_s` | `0x43` | | |
| `i32.div_u` | `0x44` | | |
| `i32.rem_s` | `0x45` | | |
| `i32.rem_u` | `0x46` | | |
| `i32.and` | `0x47` | | |
| `i32.or` | `0x48` | | |
| `i32.xor` | `0x49` | | |
| `i32.shl` | `0x4a` | | |
| `i32.shr_u` | `0x4b` | | |
| `i32.shr_s` | `0x4c` | | |
| `i32.eq` | `0x4d` | | |
| `i32.ne` | `0x4e` | | |
| `i32.lt_s` | `0x4f` | | |
| `i32.le_s` | `0x50` | | |
| `i32.lt_u` | `0x51` | | |
| `i32.le_u` | `0x52` | | |
| `i32.gt_s` | `0x53` | | |
| `i32.ge_s` | `0x54` | | |
| `i32.gt_u` | `0x55` | | |
| `i32.ge_u` | `0x56` | | |
| `i32.clz` | `0x57` | | |
| `i32.ctz` | `0x58` | | |
| `i32.popcnt` | `0x59` | | |
| `bool.not` | `0x5a` | | |
| `i64.add` | `0x5b` | | |
| `i64.sub` | `0x5c` | | |
| `i64.mul` | `0x5d` | | |
| `i64.div_s` | `0x5e` | | |
| `i64.div_u` | `0x5f` | | |
| `i64.rem_s` | `0x60` | | |
| `i64.rem_u` | `0x61` | | |
| `i64.and` | `0x62` | | |
| `i64.or` | `0x63` | | |
| `i64.xor` | `0x64` | | |
| `i64.shl` | `0x65` | | |
| `i64.shr_u` | `0x66` | | |
| `i64.shr_s` | `0x67` | | |
| `i64.eq` | `0x68` | | |
| `i64.ne` | `0x69` | | |
| `i64.lt_s` | `0x6a` | | |
| `i64.le_s` | `0x6b` | | |
| `i64.lt_u` | `0x6c` | | |
| `i64.le_u` | `0x6d` | | |
| `i64.gt_s` | `0x6e` | | |
| `i64.ge_s` | `0x6f` | | |
| `i64.gt_u` | `0x70` | | |
| `i64.ge_u` | `0x71` | | |
| `i64.clz` | `0x72` | | |
| `i64.ctz` | `0x73` | | |
| `i64.popcnt` | `0x74` | | |
| `f32.add` | `0x75` | | |
| `f32.sub` | `0x76` | | |
| `f32.mul` | `0x77` | | |
| `f32.div` | `0x78` | | |
| `f32.min` | `0x79` | | |
| `f32.max` | `0x7a` | | |
| `f32.abs` | `0x7b` | | |
| `f32.neg` | `0x7c` | | |
| `f32.copysign` | `0x7d` | | |
| `f32.ceil` | `0x7e` | | |
| `f32.floor` | `0x7f` | | |
| `f32.trunc` | `0x80` | | |
| `f32.nearest` | `0x81` | | |
| `f32.sqrt` | `0x82` | | |
| `f32.eq` | `0x83` | | |
| `f32.ne` | `0x84` | | |
| `f32.lt` | `0x85` | | |
| `f32.le` | `0x86` | | |
| `f32.gt` | `0x87` | | |
| `f32.ge` | `0x88` | | |
| `f64.add` | `0x89` | | |
| `f64.sub` | `0x8a` | | |
| `f64.mul` | `0x8b` | | |
| `f64.div` | `0x8c` | | |
| `f64.min` | `0x8d` | | |
| `f64.max` | `0x8e` | | |
| `f64.abs` | `0x8f` | | |
| `f64.neg` | `0x90` | | |
| `f64.copysign` | `0x91` | | |
| `f64.ceil` | `0x92` | | |
| `f64.floor` | `0x93` | | |
| `f64.trunc` | `0x94` | | |
| `f64.nearest` | `0x95` | | |
| `f64.sqrt` | `0x96` | | |
| `f64.eq` | `0x97` | | |
| `f64.ne` | `0x98` | | |
| `f64.lt` | `0x99` | | |
| `f64.le` | `0x9a` | | |
| `f64.gt` | `0x9b` | | |
| `f64.ge` | `0x9c` | | |
| `i32.trunc_s/f32` | `0x9d` | | |
| `i32.trunc_s/f64` | `0x9e` | | |
| `i32.trunc_u/f32` | `0x9f` | | |
| `i32.trunc_u/f64` | `0xa0` | | |
| `i32.wrap/i64` | `0xa1` | | |
| `i64.trunc_s/f32` | `0xa2` | | |
| `i64.trunc_s/f64` | `0xa3` | | |
| `i64.trunc_u/f32` | `0xa4` | | |
| `i64.trunc_u/f64` | `0xa5` | | |
| `i64.extend_s/i32` | `0xa6` | | |
| `i64.extend_u/i32` | `0xa7` | | |
| `f32.convert_s/i32` | `0xa8` | | |
| `f32.convert_u/i32` | `0xa9` | | |
| `f32.convert_s/i64` | `0xaa` | | |
| `f32.convert_u/i64` | `0xab` | | |
| `f32.demote/f64` | `0xac` | | |
| `f32.reinterpret/i32` | `0xad` | | |
| `f64.convert_s/i32` | `0xae` | | |
| `f64.convert_u/i32` | `0xaf` | | |
| `f64.convert_s/i64` | `0xb0` | | |
| `f64.convert_u/i64` | `0xb1` | | |
| `f64.promote/f32` | `0xb2` | | |
| `f64.reinterpret/i64` | `0xb3` | | |
| `i32.reinterpret/f32` | `0xb4` | | |
| `i64.reinterpret/f64` | `0xb5` | | |