//--------------------------------------------------------
//
//
//	Melfas MMS100 Series Download base v1.7 2011.09.23
//
//
//--------------------------------------------------------

#ifndef __MELFAS_DOWNLOAD_PORTING_H_INCLUDED__
#define __MELFAS_DOWNLOAD_PORTING_H_INCLUDED__

//============================================================
//
//	Porting order
//
//============================================================
/*

1. melfas_download_porting.h
   - Check typedef	[melfas_download_porting.h]

   - Check download options	[melfas_download_porting.h]

   - Add Port control code  ( CE, RESETB, I2C,... )	[melfas_download_porting.h]

   - Apply your delay function ( inside mcsdl_delaly() )	[melfas_download.c]
      Modify delay parameter constant ( ex. MCSDL_DELAY_5MS ) to make it fit to your delay function.

   - Rename 'uart_printf()' to your console print function for debugging. [melfas_download_porting.h]
   	  or, define uart_printf() as different function properly.

   - Check Watchdog timer, Interrupt factor

   - Including Melfas binary .c file

   - Basenad dealy function
      fill up mcsdl_delay()

   - Implement processing external Melfas binary .bin file.

*/

//============================================================
//
//	Type define
//
//============================================================

//typedef char				INT8;
//typedef unsigned char		UINT8;
//typedef unsigned char		uint8_t;
//typedef short				INT16;
//typedef unsigned short		UINT16;
//typedef unsigned short	uint16_t;
//typedef int					INT32;
//typedef unsigned int		UINT32;
typedef unsigned char		BOOLEAN;


#ifndef TRUE
#define TRUE 				(1==1)
#endif

#ifndef FALSE
#define FALSE 				(1==0)
#endif

#ifndef NULL
#define NULL 				0
#endif


//============================================================
//
//	Porting Download Options
//
//============================================================

// For printing debug information. ( Please check 'printing function' )
#define MELFAS_ENABLE_DBG_PRINT											1
#define MELFAS_ENABLE_DBG_PROGRESS_PRINT								1

// For delay function test. ( Disable after Porting is finished )
#define MELFAS_ENABLE_DELAY_TEST										0


//============================================================
//
//	IO Control poting.
//
//	Fill 'Using signal' up only.
// 	See MCSDL_USE_VDD_CONTROL,
//		MCSDL_USE_CE_CONTROL,
//
//============================================================

//----------------
// VDD
//----------------
#if MCSDL_USE_VDD_CONTROL
#define MCSDL_VDD_SET_HIGH()             			hwPowerOn ( MT6323_POWER_LDO_VGP2, VOL_3000, "TP" );
#define MCSDL_VDD_SET_LOW()              			hwPowerDown ( MT6323_POWER_LDO_VGP2, "TP" );
#else
#define MCSDL_VDD_SET_HIGH()             			// Nothing
#define MCSDL_VDD_SET_LOW()              			// Nothing
#endif

//----------------
// CE
//----------------
#if MCSDL_USE_CE_CONTROL
#define MCSDL_CE_SET_HIGH()   	          			____HERE!_____
#define MCSDL_CE_SET_LOW()      	        		____HERE!_____
#define MCSDL_CE_SET_OUTPUT()   	        		____HERE!_____
#else
#define MCSDL_CE_SET_HIGH()							// Nothing
#define MCSDL_CE_SET_LOW()							// Nothing
#define MCSDL_CE_SET_OUTPUT()						// Nothing
#endif


//----------------
// RESETB
//----------------
#if MCSDL_USE_RESETB_CONTROL
#define MCSDL_RESETB_SET_HIGH()             		mt_set_gpio_out(GPIO_CTP_EINT_PIN, 1);
#define MCSDL_RESETB_SET_LOW()              		mt_set_gpio_out(GPIO_CTP_EINT_PIN, 0);
#define MCSDL_RESETB_SET_OUTPUT()     		        mt_set_gpio_dir(GPIO_CTP_EINT_PIN, GPIO_DIR_OUT);
#define MCSDL_RESETB_SET_INPUT()            		mt_set_gpio_dir(GPIO_CTP_EINT_PIN, GPIO_DIR_IN);
#else
#define MCSDL_RESETB_SET_HIGH()                     // Nothing
#define MCSDL_RESETB_SET_LOW()                      // Nothing
#define MCSDL_RESETB_SET_OUTPUT()                   // Nothing
#define MCSDL_RESETB_SET_INPUT()                    // Nothing
#endif


//------------------
// I2C SCL & SDA
//------------------

#define MCSDL_GPIO_SCL_SET_HIGH()					mt_set_gpio_out(GPIO_I2C1_SCA_PIN, 1);
#define MCSDL_GPIO_SCL_SET_LOW()					mt_set_gpio_out(GPIO_I2C1_SCA_PIN, 0);

#define MCSDL_GPIO_SDA_SET_HIGH()					mt_set_gpio_out(GPIO_I2C1_SDA_PIN, 1);
#define MCSDL_GPIO_SDA_SET_LOW()					mt_set_gpio_out(GPIO_I2C1_SDA_PIN, 0);

#define MCSDL_GPIO_SCL_SET_OUTPUT()					mt_set_gpio_dir(GPIO_I2C1_SCA_PIN, GPIO_DIR_OUT);
#define MCSDL_GPIO_SCL_SET_INPUT()					mt_set_gpio_dir(GPIO_I2C1_SCA_PIN, GPIO_DIR_IN);
#define MCSDL_GPIO_SCL_IS_HIGH()					((gpio_get_value(GPIO_I2C1_SCA_PIN)>0)?1:0)

#define MCSDL_GPIO_SDA_SET_OUTPUT()					mt_set_gpio_dir(GPIO_I2C1_SDA_PIN, GPIO_DIR_OUT);
#define MCSDL_GPIO_SDA_SET_INPUT()					mt_set_gpio_dir(GPIO_I2C1_SDA_PIN, GPIO_DIR_IN);

#define MCSDL_GPIO_SDA_IS_HIGH()					((mt_get_gpio_in(GPIO_I2C1_SDA_PIN)>0)?1:0)

#define MCSDL_SET_GPIO_I2C()						// Nothing
#define MCSDL_SET_HW_I2C()							// Nothing



//============================================================
//
//	Delay parameter setting
//
//	These are used on 'mcsdl_delay()'
//
//============================================================

#define MCSDL_DELAY_1US			1
#define MCSDL_DELAY_3US			3
#define MCSDL_DELAY_7US			7
#define MCSDL_DELAY_10US		10
#define MCSDL_DELAY_20US		20
#define MCSDL_DELAY_40US		40

#define MCSDL_DELAY_100US		100
#define MCSDL_DELAY_150US		150
#define MCSDL_DELAY_300US		300

#define MCSDL_DELAY_25MS		25000
#define MCSDL_DELAY_30MS		30000
#define MCSDL_DELAY_40MS		40000
#define MCSDL_DELAY_60MS		60000

#define MCSDL_DELAY_100MS		100000
#define MCSDL_DELAY_500MS		500000


//============================================================
//
//	Defence External Effect
//
//============================================================
#if 0

#define MELFAS_DISABLE_BASEBAND_ISR()				____HERE!_____
#define MELFAS_DISABLE_WATCHDOG_TIMER_RESET()		____HERE!_____

#define MELFAS_ROLLBACK_BASEBAND_ISR()				____HERE!_____
#define MELFAS_ROLLBACK_WATCHDOG_TIMER_RESET()		____HERE!_____

#else

#define MELFAS_DISABLE_BASEBAND_ISR()				// Nothing
#define MELFAS_DISABLE_WATCHDOG_TIMER_RESET()		// Nothing

#define MELFAS_ROLLBACK_BASEBAND_ISR()				// Nothing
#define MELFAS_ROLLBACK_WATCHDOG_TIMER_RESET()		// Nothing

#endif



#endif