aboutsummaryrefslogtreecommitdiff
path: root/fs/ext4
Commit message (Collapse)AuthorAgeFilesLines
...
* ext4: Fix data corruption for mmap writesJan Kara2017-12-311-2/+16
| | | | | | | | | | | | | | | | | | mpage_submit_page() can race with another process growing i_size and writing data via mmap to the written-back page. As mpage_submit_page() samples i_size too early, it may happen that ext4_bio_write_page() zeroes out too large tail of the page and thus corrupts user data. Fix the problem by sampling i_size only after the page has been write-protected in page tables by clear_page_dirty_for_io() call. Reported-by: Michael Zimmer <michael@swarm64.com> CC: stable@vger.kernel.org Fixes: cb20d5188366f04d96d2e07b1240cc92170ade40 Signed-off-by: Jan Kara <jack@suse.cz> [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* Revert "ext4: fix data corruption for mmap writes"Mister Oyster2017-12-311-19/+5
| | | | This reverts commit 156b66c5bad7fa7621024c2537bfeb48e5a21da0.
* ext4: convert to mbcache2Jan Kara2017-12-314-75/+75
| | | | | | | | | | | The conversion is generally straightforward. The only tricky part is that xattr block corresponding to found mbcache entry can get freed before we get buffer lock for that block. So we have to check whether the entry is still valid after getting buffer lock. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: iterate over buffer heads correctly in move_extent_per_page()Eryu Guan2017-12-311-0/+1
| | | | | | | | | | | | | In commit bcff24887d00 ("ext4: don't read blocks from disk after extents being swapped") bh is not updated correctly in the for loop and wrong data has been written to disk. generic/324 catches this on sub-page block size ext4. Fixes: bcff24887d00 ("ext4: don't read blocks from disk after extentsbeing swapped") Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: enforce online defrag restriction for encrypted filesEric Whitney2017-12-311-0/+8
| | | | | | | | | | | | | | | | Online defragging of encrypted files is not currently implemented. However, the move extent ioctl can still return successfully when called. For example, this occurs when xfstest ext4/020 is run on an encrypted file system, resulting in a corrupted test file and a corresponding test failure. Until the proper functionality is implemented, fail the move extent ioctl if either the original or donor file is encrypted. Cc: stable@vger.kernel.org Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: don't read blocks from disk after extents being swappedEryu Guan2017-12-311-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I notice ext4/307 fails occasionally on ppc64 host, reporting md5 checksum mismatch after moving data from original file to donor file. The reason is that move_extent_per_page() calls __block_write_begin() and block_commit_write() to write saved data from original inode blocks to donor inode blocks, but __block_write_begin() not only maps buffer heads but also reads block content from disk if the size is not block size aligned. At this time the physical block number in mapped buffer head is pointing to the donor file not the original file, and that results in reading wrong data to page, which get written to disk in following block_commit_write call. This also can be reproduced by the following script on 1k block size ext4 on x86_64 host: mnt=/mnt/ext4 donorfile=$mnt/donor testfile=$mnt/testfile e4compact=~/xfstests/src/e4compact rm -f $donorfile $testfile # reserve space for donor file, written by 0xaa and sync to disk to # avoid EBUSY on EXT4_IOC_MOVE_EXT xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile # create test file written by 0xbb xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile # compute initial md5sum md5sum $testfile | tee md5sum.txt # drop cache, force e4compact to read data from disk echo 3 > /proc/sys/vm/drop_caches # test defrag echo "$testfile" | $e4compact -i -v -f $donorfile # check md5sum md5sum -c md5sum.txt Fix it by creating & mapping buffer heads only but not reading blocks from disk, because all the data in page is guaranteed to be up-to-date in mext_page_mkuptodate(). Cc: stable@vger.kernel.org Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: evict inline data when writing to memory mapEric Biggers2017-12-311-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the case of writing via mmap to a file with inline data is not handled. This is maybe a rare case since it requires a writable memory map of a very small file, but it is trivial to trigger with on inline_data filesystem, and it causes the 'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in ext4_writepages() to be hit: mkfs.ext4 -O inline_data /dev/vdb mount /dev/vdb /mnt xfs_io -f /mnt/file \ -c 'pwrite 0 1' \ -c 'mmap -w 0 1m' \ -c 'mwrite 0 1' \ -c 'fsync' kernel BUG at fs/ext4/inode.c:2723! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff88003d3a8040 task.stack: ffffc90000300000 RIP: 0010:ext4_writepages+0xc89/0xf8a RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283 RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246 RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5 R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698 R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff FS: 00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0 Call Trace: ? _raw_spin_unlock+0x27/0x2a ? kvm_clock_read+0x1e/0x20 do_writepages+0x23/0x2c ? do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x80/0x87 filemap_write_and_wait_range+0x67/0x8c ext4_sync_file+0x20e/0x472 vfs_fsync_range+0x8e/0x9f ? syscall_trace_enter+0x25b/0x2d0 vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 do_syscall_64+0x69/0x131 entry_SYSCALL64_slow_path+0x25/0x25 We could try to be smart and keep the inline data in this case, or at least support delayed allocation when allocating the block, but these solutions would be more complicated and don't seem worthwhile given how rare this case seems to be. So just fix the bug by calling ext4_convert_inline_data() when we're asked to make a page writable, so that any inline data gets evicted, with the block allocated immediately. Reported-by: Nick Alcock <nick.alcock@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix crashes in dioread_nolock modeJan Kara2017-12-311-20/+20
| | | | | | | | | | | | | | | | | | | Competing overwrite DIO in dioread_nolock mode will just overwrite pointer to io_end in the inode. This may result in data corruption or extent conversion happening from IO completion interrupt because we don't properly set buffer_defer_completion() when unlocked DIO races with locked DIO to unwritten extent. Since unlocked DIO doesn't need io_end for anything, just avoid allocating it and corrupting pointer from inode for locked DIO. A cleaner fix would be to avoid these games with io_end pointer from the inode but that requires more intrusive changes so we leave that for later. Cc: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: bugfix for mmaped pages in mpage_release_unused_pages()wangguang2017-12-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pages clear buffers after ext4 delayed block allocation failed, However, it does not clean its pte_dirty flag. if the pages unmap ,in cording to the pte_dirty , unmap_page_range may try to call __set_page_dirty, which may lead to the bugon at mpage_prepare_extent_to_map:head = page_buffers(page);. This patch just call clear_page_dirty_for_io to clean pte_dirty at mpage_release_unused_pages for pages mmaped. Steps to reproduce the bug: （1） mmap a file in ext4 addr = (char *)mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); memset(addr, 'i', 4096); （2） return EIO at ext4_writepages->mpage_map_and_submit_extent->mpage_map_one_extent which causes this log message to be print: ext4_msg(sb, KERN_CRIT, "Delayed block allocation failed for " "inode %lu at logical offset %llu with" " max blocks %u with error %d", inode->i_ino, (unsigned long long)map->m_lblk, (unsigned)map->m_len, -err); (3）Unmap the addr cause warning at __set_page_dirty:WARN_ON_ONCE(warn && !PageUptodate(page)); (4) wait for a minute,then bugon happen. Cc: stable@vger.kernel.org Signed-off-by: wangguang <wangguang03@zte.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix bh->b_state corruptionJan Kara2017-12-311-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | ext4 can update bh->b_state non-atomically in _ext4_get_block() and ext4_da_get_block_prep(). Usually this is fine since bh is just a temporary storage for mapping information on stack but in some cases it can be fully living bh attached to a page. In such case non-atomic update of bh->b_state can race with an atomic update which then gets lost. Usually when we are mapping bh and thus updating bh->b_state non-atomically, nobody else touches the bh and so things work out fine but there is one case to especially worry about: ext4_finish_bio() uses BH_Uptodate_Lock on the first bh in the page to synchronize handling of PageWriteback state. So when blocksize < pagesize, we can be atomically modifying bh->b_state of a buffer that actually isn't under IO and thus can race e.g. with delalloc trying to map that buffer. The result is that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock. Fix the problem by always updating bh->b_state bits atomically. CC: stable@vger.kernel.org Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix inline data error pathsTheodore Ts'o2017-12-312-6/+23
| | | | | | | | | | | The write_end() function must always unlock the page and drop its ref count, even on an error. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: clean up error handling when orphan list is corruptedTheodore Ts'o2017-12-311-24/+22
| | | | | | | | | | | | Instead of just printing warning messages, if the orphan list is corrupted, declare the file system is corrupted. If there are any reserved inodes in the orphaned inode list, declare the file system corrupted and stop right away to avoid doing more potential damage to the file system. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix oops on corrupted filesystemJan Kara2017-12-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When filesystem is corrupted in the right way, it can happen ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we subsequently remove inode from the in-memory orphan list. However this deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we leave i_orphan list_head with a stale content. Later we can look at this content causing list corruption, oops, or other issues. The reported trace looked like: WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100() list_del corruption, 0000000061c1d6e0->next is LIST_POISON1 0000000000100100) CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250 Stack: 60462947 62219960 602ede24 62219960 602ede24 603ca293 622198f0 602f02eb 62219950 6002c12c 62219900 601b4d6b Call Trace: [<6005769c>] ? vprintk_emit+0x2dc/0x5c0 [<602ede24>] ? printk+0x0/0x94 [<600190bc>] show_stack+0xdc/0x1a0 [<602ede24>] ? printk+0x0/0x94 [<602ede24>] ? printk+0x0/0x94 [<602f02eb>] dump_stack+0x2a/0x2c [<6002c12c>] warn_slowpath_common+0x9c/0xf0 [<601b4d6b>] ? __list_del_entry+0x6b/0x100 [<6002c254>] warn_slowpath_fmt+0x94/0xa0 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0 [<60023ebf>] ? set_signals+0x3f/0x50 [<600a205a>] ? kmem_cache_free+0x10a/0x180 [<602f4e88>] ? mutex_lock+0x18/0x30 [<601b4d6b>] __list_del_entry+0x6b/0x100 [<601177ec>] ext4_orphan_del+0x22c/0x2f0 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0 [<6010b973>] ? ext4_truncate+0x383/0x390 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0 [<6001bb50>] ? copy_from_user+0x0/0xb0 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0 [<60072c4f>] generic_perform_write+0xaf/0x1e0 [<600c4166>] ? file_update_time+0x46/0x110 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0 [<6010030f>] ext4_file_write_iter+0x15f/0x470 [<60094e10>] ? unlink_file_vma+0x0/0x70 [<6009b180>] ? unlink_anon_vmas+0x0/0x260 [<6008f169>] ? free_pgtables+0xb9/0x100 [<600a6030>] __vfs_write+0xb0/0x130 [<600a61d5>] vfs_write+0xa5/0x170 [<600a63d6>] SyS_write+0x56/0xe0 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0 [<6001b698>] handle_syscall+0x68/0x90 [<6002633d>] userspace+0x4fd/0x600 [<6002274f>] ? save_registers+0x1f/0x40 [<60028bd7>] ? arch_prctl+0x177/0x1b0 [<60017bd5>] fork_handler+0x85/0x90 Fix the problem by using list_del_init() as we always should with i_orphan list. CC: stable@vger.kernel.org Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix data corruption with EXT4_GET_BLOCKS_ZEROJan Kara2017-12-311-43/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: validate s_reserved_gdt_blocks on mountTheodore Ts'o2017-12-312-0/+10
| | | | | | | | | | | | | | | | | If s_reserved_gdt_blocks is extremely large, it's possible for ext4_init_block_bitmap(), which is called when ext4 sets up an uninitialized block bitmap, to corrupt random kernel memory. Add the same checks which e2fsck has --- it must never be larger than blocksize / sizeof(__u32) --- and then add a backup check in ext4_init_block_bitmap() in case the superblock gets modified after the file system is mounted. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: ignore quota mount options if the quota feature is enabledTheodore Ts'o2017-12-311-11/+11
| | | | | | | | | | | | | | | | Previously, ext4 would fail the mount if the file system had the quota feature enabled and quota mount options (used for the older quota setups) were present. This broke xfstests, since xfs silently ignores the usrquote and grpquota mount options if they are specified. This commit changes things so that we are consistent with xfs; having the mount options specified is harmless, so no sense break users by forbidding them. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: don't save the error information if the block device is read-onlyTheodore Ts'o2017-12-311-0/+2
| | | | | | | | | | | | | | | | .... because otherwise a corrupted root file file system (caused by flash corruption, etc.) will result in the device becoming bricked after an attempted OTA update --- which can only be recovered by a custom recovery image manually flashed onto the device (or a warantee return). Cherry picked from android-common 3.10 branch: 00a6e4dfa BUG=20939131 Change-Id: I7d5fe852c30efc35aa39fba7f708a22c034a1839 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: "Theodore Ts'o" <tytso@google.com>
* UPSTREAM: ext4: fix potential use after free in __ext4_journal_stopLukas Czerner2017-12-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd63b125dee8b15c705216d7186daea4625 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd63b125dee8b15c705216d7186daea4625 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org (cherry picked from commit 6934da9238da947628be83635e365df41064b09b) Signed-off-by: Bernie Thompson <bhthompson@google.com> Change-Id: I788135d7558d1c6ddcdef4366e106b17e9df80a5 Reviewed-on: https://chromium-review.googlesource.com/412985 Commit-Ready: Bernie Thompson <bhthompson@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Joe Maples <joe@frap129.org>
* UPSTREAM: ext4: fix NULL pointer dereference when journal restart failsLukas Czerner2017-12-311-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Cc: stable@vger.kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> (cherry picked from commit 9d506594069355d1fb2de3f9104667312ff08ed3) Signed-off-by: Bernie Thompson <bhthompson@google.com> Change-Id: Ic0b0f902ccbacb6d5f3388e601464e203b78ccf0 Reviewed-on: https://chromium-review.googlesource.com/412984 Commit-Ready: Bernie Thompson <bhthompson@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: reject journal options for ext2 mountsCarlos Maiolino2017-12-311-3/+3
| | | | | | | | | | There is no reason to allow ext2 filesystems be mounted with journal mount options. So, this patch adds them to the MOPT_NO_EXT2 mount options list. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* fs/ext4/super.c: use strreplace() in ext4_fill_super()Rasmus Villemoes2017-12-311-3/+1
| | | | | | | | | | This makes a very large function a little smaller. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: move procfs registration code to fs/ext4/sysfs.cTheodore Ts'o2017-12-316-106/+77
| | | | | | | | | | This allows us to refactor the procfs code, which saves a bit of compiled space. More importantly it isolates most of the procfs support code into a single file, so it's easier to #ifdef it out if the proc file system has been disabled. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: refactor sysfs support codeTheodore Ts'o2017-12-311-133/+128
| | | | | | | | Make the code more easily extensible as well as taking up less compiled space. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: move sysfs code from super.c to fs/ext4/sysfs.cTheodore Ts'o2017-12-314-410/+410
| | | | | | | | | Also statically allocate the ext4_kset and ext4_feat objects, since we only need exactly one of each, and it's simpler and less code if we drop the dynamic allocation and deallocation when it's not needed. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: optimize ext4_writepage() for attempted 4k delalloc writesTheodore Ts'o2017-12-311-1/+12
| | | | | | | | | | | | | | In cases where the file system block size is the same as the page size, and ext4_writepage() is asked to write out a page which is either has the unwritten bit set in the extent tree, or which does not yet have a block assigned due to delayed allocation, we can bail out early and, unlocking the page earlier and avoiding a round trip through ext4_bio_write_page() with the attendant calls to set_page_writeback() and redirty_page_for_writeback(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix an endianness bug in ext4_encrypted_follow_link()Al Viro2017-12-311-1/+1
| | | | | | | | | applying le32_to_cpu() to 16bit value is a bad idea... Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix an endianness bug in ext4_encrypted_zeroout()Al Viro2017-12-311-1/+1
| | | | | | | | | | | | | ex->ee_block is not host-endian (note that accesses of other fields of *ex right next to that line go through the helpers that do proper conversion from little-endian to host-endian; it might make sense to add similar for ->ee_block to avoid reintroducing that kind of bugs...) Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: remove unused definition for MAX_32_NUMFabian Frederick2017-12-311-2/+0
| | | | | | | | MAX_32_NUM isn't used in ext4 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: create EXT4_MAX_BLOCKS() macroFabian Frederick2017-12-313-14/+7
| | | | | | | | | Create a macro to calculate length + offset -> maximum blocks This adds more readability. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: improve ext4lazyinit scalabilityDmitry Monakhov2017-12-311-10/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ext4lazyinit is a global thread. This thread performs itable initalization under li_list_mtx mutex. It basically does the following: ext4_lazyinit_thread ->mutex_lock(&eli->li_list_mtx); ->ext4_run_li_request(elr) ->ext4_init_inode_table-> Do a lot of IO if the list is large And when new mount/umount arrive they have to block on ->li_list_mtx because lazy_thread holds it during full walk procedure. ext4_fill_super ->ext4_register_li_request ->mutex_lock(&ext4_li_info->li_list_mtx); ->list_add(&elr->lr_request, &ext4_li_info >li_request_list); In my case mount takes 40minutes on server with 36 * 4Tb HDD. Common user may face this in case of very slow dev ( /dev/mmcblkXXX) Even more. If one of filesystems was frozen lazyinit_thread will simply block on sb_start_write() so other mount/umount will be stuck forever. This patch changes logic like follows: - grab ->s_umount read sem before processing new li_request. After that it is safe to drop li_list_mtx because all callers of li_remove_request are holding ->s_umount for write. - li_thread skips frozen SB's Locking order: Mh KOrder is asserted by umount path like follows: s_umount ->li_list_mtx so the only way to to grab ->s_mount inside li_thread is via down_read_trylock xfstests:ext4/023 #PSBM-49658 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: remove checks for e_value_blockJan Kara2017-12-311-8/+7
| | | | | | | | | | | | Currently we don't support xattrs with e_value_block set. We don't allow them to pass initial xattr check so there's no point for checking for this later. Since these tests were untested, bugs were creeping in and not all places which should have checked were checking e_value_block anyway. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: explicit mount options parsing cleanupDmitry Monakhov2017-12-311-2/+6
| | | | | | | | | | Currently MOPT_EXPLICIT treated as EXPLICIT_DELALLOC which may be changed in future. Let's fix it now. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Pranav Vashi <neobuddy89@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: don't manipulate recovery flag when freezing no-journal fsEric Sandeen2017-12-311-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c642dc9e1aaed953597e7092d7df329e6234096e ] At some point along this sequence of changes: f6e63f9 ext4: fold ext4_nojournal_sops into ext4_sops bb04457 ext4: support freezing ext2 (nojournal) file systems 9ca9238 ext4: Use separate super_operations structure for no_journal filesystems ext4 started setting needs_recovery on filesystems without journals when they are unfrozen. This makes no sense, and in fact confuses blkid to the point where it doesn't recognize the filesystem at all. (freeze ext2; unfreeze ext2; run blkid; see no output; run dumpe2fs, see needs_recovery set on fs w/ no journal). To fix this, don't manipulate the INCOMPAT_RECOVER feature on filesystems without journals. Reported-by: Stu Mark <smark@datto.com> Reviewed-by: Jan Kara <jack@suse.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Pranav Vashi <neobuddy89@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: Check that external xattr value block is zeroJan Kara2017-12-311-0/+2
| | | | | | | | | | | Currently we don't support xattrs with values stored out of line. Check for that in ext4_xattr_check_names() to make sure we never work with such xattrs since not all the code counts with that resulting is possible weird corruption issues. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()Theodore Ts'o2017-12-313-54/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The xattr_sem deadlock problems fixed in commit 2e81a4eeedca: "ext4: avoid deadlock when expanding inode size" didn't include the use of xattr_sem in fs/ext4/inline.c. With the addition of project quota which added a new extra inode field, this exposed deadlocks in the inline_data code similar to the ones fixed by 2e81a4eeedca. The deadlock can be reproduced via: dmesg -n 7 mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768 mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc mkdir /vdc/a umount /vdc mount -t ext4 /dev/vdc /vdc echo foo > /vdc/a/foo and looks like this: [ 11.158815] [ 11.160276] ============================================= [ 11.161960] [ INFO: possible recursive locking detected ] [ 11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G W [ 11.161960] --------------------------------------------- [ 11.161960] bash/2519 is trying to acquire lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [<c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] [ 11.161960] but task is already holding lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] other info that might help us debug this: [ 11.161960] Possible unsafe locking scenario: [ 11.161960] [ 11.161960] CPU0 [ 11.161960] ---- [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] [ 11.161960] *** DEADLOCK *** [ 11.161960] [ 11.161960] May be due to missing lock nesting notation [ 11.161960] [ 11.161960] 4 locks held by bash/2519: [ 11.161960] #0: (sb_writers#3){.+.+.+}, at: [<c11a2414>] mnt_want_write+0x1e/0x3e [ 11.161960] #1: (&type->i_mutex_dir_key){++++++}, at: [<c119508b>] path_openat+0x338/0x67a [ 11.161960] #2: (jbd2_handle){++++..}, at: [<c123314a>] start_this_handle+0x582/0x622 [ 11.161960] #3: (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] stack backtrace: [ 11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G W 4.10.0-rc3-00015-g011b30a8a3cf #160 [ 11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 11.161960] Call Trace: [ 11.161960] dump_stack+0x72/0xa3 [ 11.161960] __lock_acquire+0xb7c/0xcb9 [ 11.161960] ? kvm_clock_read+0x1f/0x29 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] lock_acquire+0x106/0x18a [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] down_write+0x39/0x72 [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ? _raw_read_unlock+0x22/0x2c [ 11.161960] ? jbd2_journal_extend+0x1e2/0x262 [ 11.161960] ? __ext4_journal_get_write_access+0x3d/0x60 [ 11.161960] ext4_mark_inode_dirty+0x17d/0x26d [ 11.161960] ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_try_add_inline_entry+0x69/0x152 [ 11.161960] ext4_add_entry+0xa3/0x848 [ 11.161960] ? __brelse+0x14/0x2f [ 11.161960] ? _raw_spin_unlock_irqrestore+0x44/0x4f [ 11.161960] ext4_add_nondir+0x17/0x5b [ 11.161960] ext4_create+0xcf/0x133 [ 11.161960] ? ext4_mknod+0x12f/0x12f [ 11.161960] lookup_open+0x39e/0x3fb [ 11.161960] ? __wake_up+0x1a/0x40 [ 11.161960] ? lock_acquire+0x11e/0x18a [ 11.161960] path_openat+0x35c/0x67a [ 11.161960] ? sched_clock_cpu+0xd7/0xf2 [ 11.161960] do_filp_open+0x36/0x7c [ 11.161960] ? _raw_spin_unlock+0x22/0x2c [ 11.161960] ? __alloc_fd+0x169/0x173 [ 11.161960] do_sys_open+0x59/0xcc [ 11.161960] SyS_open+0x1d/0x1f [ 11.161960] do_int80_syscall_32+0x4f/0x61 [ 11.161960] entry_INT80_32+0x2f/0x2f [ 11.161960] EIP: 0xb76ad469 [ 11.161960] EFLAGS: 00000286 CPU: 0 [ 11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6 [ 11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0 [ 11.161960] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Cc: stable@vger.kernel.org # 3.10 (requires 2e81a4eeedca as a prereq) Reported-by: George Spelvin <linux@sciencehorizons.net> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix crash when a directory's i_size is too smallChandan Rajendra2017-12-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a ppc64 machine, when mounting a fuzzed ext2 image (generated by fsfuzzer) the following call trace is seen, VFS: brelse: Trying to free free buffer WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40 .__brelse.part.6+0x20/0x40 (unreliable) .ext4_find_entry+0x384/0x4f0 .ext4_lookup+0x84/0x250 .lookup_slow+0xdc/0x230 .walk_component+0x268/0x400 .path_lookupat+0xec/0x2d0 .filename_lookup+0x9c/0x1d0 .vfs_statx+0x98/0x140 .SyS_newfstatat+0x48/0x80 system_call+0x58/0x6c This happens because the directory that ext4_find_entry() looks up has inode->i_size that is less than the block size of the filesystem. This causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not reading any of the directory file's blocks. This renders the entries in bh_use[] array to continue to have garbage data. buffer_uptodate() on bh_use[0] can then return a zero value upon which brelse() function is invoked. This commit fixes the bug by returning -ENOENT when the directory file has no associated blocks. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Cc: stable@vger.kernel.org
* UPSTREAM: fscrypt: lock mutex before checking for bounce page poolEric Biggers2017-12-191-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fscrypt_initialize(), which allocates the global bounce page pool when an encrypted file is first accessed, uses "double-checked locking" to try to avoid locking fscrypt_init_mutex. However, it doesn't use any memory barriers, so it's theoretically possible for a thread to observe a bounce page pool which has not been fully initialized. This is a classic bug with "double-checked locking". While "only a theoretical issue" in the latest kernel, in pre-4.8 kernels the pointer that was checked was not even the last to be initialized, so it was easily possible for a crash (NULL pointer dereference) to happen. This was changed only incidentally by the large refactor to use fs/crypto/. Solve both problems in a trivial way that can easily be backported: just always take the mutex. It's theoretically less efficient, but it shouldn't be noticeable in practice as the mutex is only acquired very briefly once per encrypted file. Later I'd like to make this use a helper macro like DO_ONCE(). However, DO_ONCE() runs in atomic context, so we'd need to add a new macro that allows blocking. Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> (cherry-picked from commit a0b3bc855374c50b5ea85273553485af48caf2f7 and fixed up for android-3.18) Change-Id: I18c7231af7de2319883934d2e36ea54e1eb44466 Signed-off-by: Eric Biggers <ebiggers@google.com>
* ext4: fix data corruption for mmap writesgregkh@linuxfoundation.org2017-12-101-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | 3.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jan Kara <jack@suse.cz> commit a056bdaae7a181f7dcc876cfab2f94538e508709 upstream. mpage_submit_page() can race with another process growing i_size and writing data via mmap to the written-back page. As mpage_submit_page() samples i_size too early, it may happen that ext4_bio_write_page() zeroes out too large tail of the page and thus corrupts user data. Fix the problem by sampling i_size only after the page has been write-protected in page tables by clear_page_dirty_for_io() call. Reported-by: Michael Zimmer <michael@swarm64.com> CC: stable@vger.kernel.org Fixes: cb20d5188366f04d96d2e07b1240cc92170ade40 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: avoid deadlock when expanding inode sizeJan Kara2017-11-062-8/+13
| | | | | | | | | | | | | | | | | | | commit 2e81a4eeedcaa66e35f58b81e0755b87057ce392 upstream. When we need to move xattrs into external xattr block, we call ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end up calling ext4_mark_inode_dirty() again which will recurse back into the inode expansion code leading to deadlocks. Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move its management into ext4_expand_extra_isize_ea() since its manipulation is safe there (due to xattr_sem) from possible races with ext4_xattr_set_handle() which plays with it as well. CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ext4: in ext4_seek_{hole,data}, return -ENXIO for negative offsetsDarrick J. Wong2017-11-061-2/+2
| | | | | | | | | | | | | | commit 1bd8d6cd3e413d64e543ec3e69ff43e75a1cf1ea upstream. In the ext4 implementations of SEEK_HOLE and SEEK_DATA, make sure we return -ENXIO for negative offsets instead of banging around inside the extent code and returning -EFSCORRUPTED. Reported-by: Mateusz S <muttdini@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # 4.6 Signed-off-by: Willy Tarreau <w@1wt.eu>
* ext4: fix SEEK_HOLEJan Kara2017-11-061-36/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7d95eddf313c88b24f99d4ca9c2411a4b82fef33 upstream. Currently, SEEK_HOLE implementation in ext4 may both return that there's a hole at some offset although that offset already has data and skip some holes during a search for the next hole. The first problem is demostrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec) Whence Result HOLE 0 Where we can see that SEEK_HOLE wrongly returned offset 0 as containing a hole although we have written data there. The second problem can be demonstrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offsets 56k..128k has been ignored by the SEEK_HOLE call. The underlying problem is in the ext4_find_unwritten_pgoff() which is just buggy. In some cases it fails to update returned offset when it finds a hole (when no pages are found or when the first found page has higher index than expected), in some cases conditions for detecting hole are just missing (we fail to detect a situation where indices of returned pages are not contiguous). Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page indices and also handle all cases where we got less pages then expected in one place and handle it properly there. Fixes: c8c0df241cc2719b1262e627f999638411934f60 CC: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ext4: keep existing extra fields when inode expandsKonstantin Khlebnikov2017-11-061-2/+3
| | | | | | | | | | | | | commit 887a9730614727c4fff7cb756711b190593fc1df upstream. ext4_expand_extra_isize() should clear only space between old and new size. Fixes: 6dd4ee7cab7e # v2.6.23 Cc: stable@vger.kernel.org Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ext4: Don't clear SGID when inheriting ACLsJan Kara2017-08-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __ext4_set_acl() into ext4_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> [@nathanchance: Backport to 3.10] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org> Signed-off-by: Mister Oyster <oysterized@gmail.com>
* ext4: lock the xattr block before checksuming itTheodore Ts'o2017-08-151-34/+31
| | | | | | | | | | | | | | commit dac7a4b4b1f664934e8b713f529b629f67db313c upstream. We must lock the xattr block before calculating or verifying the checksum in order to avoid spurious checksum failures. https://bugzilla.kernel.org/show_bug.cgi?id=193661 Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ext4: preserve i_mode if __ext4_set_acl() failsErnesto A. Fernández2017-08-121-4/+11
| | | | | | | | | | | | | | | | | When changing a file's acl mask, __ext4_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by only changing the inode mode after the acl has been set. Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
* ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesizeJan Kara2017-08-121-0/+3
| | | | | | | | | | | | | | | | | | | | | ext4_find_unwritten_pgoff() does not properly handle a situation when starting index is in the middle of a page and blocksize < pagesize. The following command shows the bug on filesystem with 1k blocksize: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Fix the problem by neglecting buffers in a page before starting offset. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> CC: stable@vger.kernel.org # 3.8+
* ext4: fix dir_nlink behaviourAndreas Dilger2017-08-122-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dir_nlink feature has been enabled by default for new ext4 filesystems since e2fsprogs-1.41 in 2008, and was automatically enabled by the kernel for older ext4 filesystems since the dir_nlink feature was added with ext4 in kernel 2.6.28+ when the subdirectory count exceeded EXT4_LINK_MAX-1. Automatically adding the file system features such as dir_nlink is generally frowned upon, since it could cause the file system to not be mountable on older kernel, thus preventing the administrator from rolling back to an older kernel if necessary. In this case, the administrator might also want to disable the feature because glibc's fts_read() function does not correctly optimize directory traversal for directories that use st_nlinks field of 1 to indicate that the number of links in the directory are not tracked by the file system, and could fail to traverse the full directory hierarchy. Fortunately, in the past ten years very few users have complained about incomplete file system traversal by glibc's fts_read(). This commit also changes ext4_inc_count() to allow i_nlinks to reach the full EXT4_LINK_MAX links on the parent directory (including "." and "..") before changing i_links_count to be 1. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196405 Signed-off-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: silence array overflow warningDan Carpenter2017-08-121-1/+1
| | | | | | | | | | | | | I get a static checker warning: fs/ext4/ext4.h:3091 ext4_set_de_type() error: buffer overflow 'ext4_type_by_mode' 15 <= 15 It seems unlikely that we would hit this read overflow in real life, but it's also simple enough to make the array 16 bytes instead of 15. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: fix warning about stack corruptionArnd Bergmann2017-08-121-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | After commit 62d1034f53e3 ("fortify: use WARN instead of BUG for now"), we get a warning about possible stack overflow from a memcpy that was not strictly bounded to the size of the local variable: inlined from 'ext4_mb_seq_groups_show' at fs/ext4/mballoc.c:2322:2: include/linux/string.h:309:9: error: '__builtin_memcpy': writing between 161 and 1116 bytes into a region of size 160 overflows the destination [-Werror=stringop-overflow=] We actually had a bug here that would have been found by the warning, but it was already fixed last year in commit 30a9d7afe70e ("ext4: fix stack memory corruption with 64k block size"). This replaces the fixed-length structure on the stack with a variable-length structure, using the correct upper bound that tells the compiler that everything is really fine here. I also change the loop count to check for the same upper bound for consistency, but the existing code is already correct here. Note that while clang won't allow certain kinds of variable-length arrays in structures, this particular instance is fine, as the array is at the end of the structure, and the size is strictly bounded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove unused mode parameterTahsin Erdogan2017-08-121-3/+3
| | | | | | | ext4_alloc_file_blocks() does not use its mode parameter. Remove it. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
generated by cgit v1.2.3 (git 2.39.1) at 2026-03-14 05:53:34 +0000