aboutsummaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
...
* net: dhcpv6: remove MTK_DHCPV6C_WIFI featureYingjoe Chen2016-12-191-5/+0
| | | | | | | | | | | | MTK extension MTK_DHCPV6C_WIFI is no longer necessary. Remove option and functionality. This reverts commit ccd52552b0ef ("HPV6: fix HPv6 onfig Error") and 4996bbf5c24b ("DHCPV6:Support DHCPV6 to Assign IPV6 Address") Change-Id: I3a1ea546bd4006546a301e0fc0fed721ae5c507f CR-Id: ALPS02210363 Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
* mediatek: update asf driverfire8552016-12-1134-58/+3619
| | | | Backported from 3.18 MM kernel
* zram: correct offset usage in zram_bio_discardWeijie Yang2016-12-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to skip the physical block(PAGE_SIZE) which is partially covered by the discard bio, so we check the remaining size and subtract it if there is a need to goto the next physical block. The current offset usage in zram_bio_discard is incorrect, it will cause its upper filesystem breakdown. Consider the following scenario: On some architecture or config, PAGE_SIZE is 64K for example, filesystem is set up on zram disk without PAGE_SIZE aligned, a discard bio leads to a offset = 4K and size=72K, normally, it should not really discard any physical block as it partially cover two physical blocks. However, with the current offset usage, it will discard the second physical block and free its memory, which will cause filesystem breakdown. This patch corrects the offset usage in zram_bio_discard. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: support REQ_DISCARDJoonsoo Kim2016-12-111-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | zram is ram based block device and can be used by backend of filesystem. When filesystem deletes a file, it normally doesn't do anything on data block of that file. It just marks on metadata of that file. This behavior has no problem on disk based block device, but has problems on ram based block device, since we can't free memory used for data block. To overcome this disadvantage, there is REQ_DISCARD functionality. If block device support REQ_DISCARD and filesystem is mounted with discard option, filesystem sends REQ_DISCARD to block device whenever some data blocks are discarded. All we have to do is to handle this request. This patch implements to flag up QUEUE_FLAG_DISCARD and handle this REQ_DISCARD request. With it, we can free memory used by zram if it isn't used. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
* set number of streams to 3DerTeufel2016-12-111-1/+1
|
* fix buildDerTeufel2016-12-113-70/+2
|
* zram: use scnprintf() in attrs show() methodsSergey Senozhatsky2016-12-112-9/+11
| | | | | | | | | | | | | | | | | | | | | sysfs.txt documentation lists the following requirements: - The buffer will always be PAGE_SIZE bytes in length. On i386, this is 4096. - show() methods should return the number of bytes printed into the buffer. This is the return value of scnprintf(). - show() should always use scnprintf(). Use scnprintf() in show() functions. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: propagate error to userMinchan Kim2016-12-113-11/+20
| | | | | | | | | | | | | | | | | | | | | When we initialized zcomp with single, we couldn't change max_comp_streams without zram reset but current interface doesn't show any error to user and even it changes max_comp_streams's value without any effect so it would make user very confusing. This patch prevents max_comp_streams's change when zcomp was initialized as single zcomp and emit the error to user(ex, echo). [akpm@linux-foundation.org: don't return with the lock held, per Sergey] [fengguang.wu@intel.com: fix coccinelle warnings] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: return error-valued pointer from zcomp_create()Sergey Senozhatsky2016-12-112-15/+18
| | | | | | | | | | | | | | | | | | | | | Instead of returning just NULL, return ERR_PTR from zcomp_create() if compressing backend creation has failed. ERR_PTR(-EINVAL) for unsupported compression algorithm request, ERR_PTR(-ENOMEM) for allocation (zcomp or compression stream) error. Perform IS_ERR() check of returned from zcomp_create() value in disksize_store() and set return code to PTR_ERR(). Change suggested by Jerome Marchand. [akpm@linux-foundation.org: clean up error recovery flow] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Jerome Marchand <jmarchan@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: move comp allocation out of init_lockSergey Senozhatsky2016-12-111-12/+15
| | | | | | | | | | | | | | | | | | While fixing lockdep spew of ->init_lock reported by Sasha Levin [1], Minchan Kim noted [2] that it's better to move compression backend allocation (using GPF_KERNEL) out of the ->init_lock lock, same way as with zram_meta_alloc(), in order to prevent the same lockdep spew. [1] https://lkml.org/lkml/2014/2/27/337 [2] https://lkml.org/lkml/2014/3/3/32 Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add lz4 algorithm backendSergey Senozhatsky2016-12-115-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce LZ4 compression backend and make it available for selection. LZ4 support is optional and requires user to set ZRAM_LZ4_COMPRESS config option. The default compression backend is LZO. TEST (x86_64, core i5, 2 cores + 2 hyperthreading, zram disk size 1G, ext4 file system, 3 compression streams) iozone -t 3 -R -r 16K -s 60M -I +Z Test LZO LZ4 ---------------------------------------------- Initial write 1642744.62 1317005.09 Rewrite 2498980.88 1800645.16 Read 3957026.38 5877043.75 Re-read 3950997.38 5861847.00 Reverse Read 2937114.56 5047384.00 Stride read 2948163.19 4929587.38 Random read 3292692.69 4880793.62 Mixed workload 1545602.62 3502940.38 Random write 2448039.75 1758786.25 Pwrite 1670051.03 1338329.69 Pread 2530682.00 5097177.62 Fwrite 3232085.62 3275942.56 Fread 6306880.25 6645271.12 So on my system LZ4 is slower in write-only tests, while it performs better in read-only and mixed (reads + writes) tests. Official LZ4 benchmarks available here http://code.google.com/p/lz4/ (linux kernel uses revision r90). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: make compression algorithm selection possibleSergey Senozhatsky2016-12-113-6/+65
| | | | | | | | | | | | | | | | | | | Add and document `comp_algorithm' device attribute. This attribute allows to show supported compression and currently selected compression algorithms: cat /sys/block/zram0/comp_algorithm [lzo] lz4 and change selected compression algorithm: echo lzo > /sys/block/zram0/comp_algorithm Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add set_max_streams knobSergey Senozhatsky2016-12-113-3/+41
| | | | | | | | | | | | | | | | | | | | | | | This patch allows to change max_comp_streams on initialised zcomp. Introduce zcomp set_max_streams() knob, zcomp_strm_multi_set_max_streams() and zcomp_strm_single_set_max_streams() callbacks to change streams limit for zcomp_strm_multi and zcomp_strm_single, accordingly. set_max_streams for single steam zcomp does nothing. If user has lowered the limit, then zcomp_strm_multi_set_max_streams() attempts to immediately free extra streams (as much as it can, depending on idle streams availability). Note, this patch does not allow to change stream 'policy' from single to multi stream (or vice versa) on already initialised compression backend. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add multi stream functionalitySergey Senozhatsky2016-12-113-4/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing zram (zcomp) implementation has only one compression stream (buffer and algorithm private part), so in order to prevent data corruption only one write (compress operation) can use this compression stream, forcing all concurrent write operations to wait for stream lock to be released. This patch changes zcomp to keep a compression streams list of user-defined size (via sysfs device attr). Each write operation still exclusively holds compression stream, the difference is that we can have N write operations (depending on size of streams list) executing in parallel. See TEST section later in commit message for performance data. Introduce struct zcomp_strm_multi and a set of functions to manage zcomp_strm stream access. zcomp_strm_multi has a list of idle zcomp_strm structs, spinlock to protect idle list and wait queue, making it possible to perform parallel compressions. The following set of functions added: - zcomp_strm_multi_find()/zcomp_strm_multi_release() find and release a compression stream, implement required locking - zcomp_strm_multi_create()/zcomp_strm_multi_destroy() create and destroy zcomp_strm_multi zcomp ->strm_find() and ->strm_release() callbacks are set during initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release() correspondingly. Each time zcomp issues a zcomp_strm_multi_find() call, the following set of operations performed: - spin lock strm_lock - if idle list is not empty, remove zcomp_strm from idle list, spin unlock and return zcomp stream pointer to caller - if idle list is empty, current adds itself to wait queue. it will be awaken by zcomp_strm_multi_release() caller. zcomp_strm_multi_release(): - spin lock strm_lock - add zcomp stream to idle list - spin unlock, wake up sleeper Minchan Kim reported that spinlock-based locking scheme has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16) base spinlock mutex ==Initial write ==Initial write ==Initial write records: 5 records: 5 records: 5 avg: 1642424.35 avg: 699610.40 avg: 1655583.71 std: 39890.95(2.43%) std: 232014.19(33.16%) std: 52293.96 max: 1690170.94 max: 1163473.45 max: 1697164.75 min: 1568669.52 min: 573429.88 min: 1553410.23 ==Rewrite ==Rewrite ==Rewrite records: 5 records: 5 records: 5 avg: 1611775.39 avg: 501406.64 avg: 1684419.11 std: 17144.58(1.06%) std: 15354.41(3.06%) std: 18367.42 max: 1641800.95 max: 531356.78 max: 1706445.84 min: 1593515.27 min: 488817.78 min: 1655335.73 When only one compression stream available, mutex with spin on owner tends to perform much better than frequent wait_event()/wake_up(). This is why single stream implemented as a special case with mutex locking. Introduce and document zram device attribute max_comp_streams. This attr shows and stores current zcomp's max number of zcomp streams (max_strm). Extend zcomp's zcomp_create() with `max_strm' parameter. `max_strm' limits the number of zcomp_strm structs in compression backend's idle list (max_comp_streams). max_comp_streams used during initialisation as follows: -- passing to zcomp_create() max_strm equals to 1 will initialise zcomp using single compression stream zcomp_strm_single (mutex-based locking). -- passing to zcomp_create() max_strm greater than 1 will initialise zcomp using multi compression stream zcomp_strm_multi (spinlock-based locking). default max_comp_streams value is 1, meaning that zram with single stream will be initialised. Later patch will introduce configuration knob to change max_comp_streams on already initialised and used zcomp. TEST iozone -t 3 -R -r 16K -s 60M -I +Z test base 1 strm (mutex) 3 strm (spinlock) ----------------------------------------------------------------------- Initial write 589286.78 583518.39 718011.05 Rewrite 604837.97 596776.38 1515125.72 Random write 584120.11 595714.58 1388850.25 Pwrite 535731.17 541117.38 739295.27 Fwrite 1418083.88 1478612.72 1484927.06 Usage example: set max_comp_streams to 4 echo 4 > /sys/block/zram0/max_comp_streams show current max_comp_streams (default value is 1). cat /sys/block/zram0/max_comp_streams Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: Documentation/ABI/testing/sysfs-block-zram
* zram: factor out single stream compressionSergey Senozhatsky2016-12-112-10/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is preparation patch to add multi stream support to zcomp. Introduce struct zcomp_strm_single and a set of functions to manage zcomp_strm stream access. zcomp_strm_single implements single compession stream, same way as current zcomp implementation. This moves zcomp_strm stream control and locking from zcomp, so compressing backend zcomp is not aware of required locking. Single and multi streams require different locking schemes. Minchan Kim reported that spinlock-based locking scheme (which is used in multi stream implementation) has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based. see https://lkml.org/lkml/2014/2/18/16 The following set of functions added: - zcomp_strm_single_find()/zcomp_strm_single_release() find and release a compression stream, implement required locking - zcomp_strm_single_create()/zcomp_strm_single_destroy() create and destroy zcomp_strm_single New ->strm_find() and ->strm_release() callbacks added to zcomp, which are set to zcomp_strm_single_find() and zcomp_strm_single_release() during initialisation. Instead of direct locking and zcomp_strm access from zcomp_strm_find() and zcomp_strm_release(), zcomp now calls ->strm_find() and ->strm_release() correspondingly. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: use zcomp compressing backendsSergey Senozhatsky2016-12-112-39/+32
| | | | | | | | | | | | | | | | Do not perform direct LZO compress/decompress calls, initialise and use zcomp LZO backend (single compression stream) instead. [akpm@linux-foundation.org: resolve conflicts with zram-delete-zram_init_device-fix.patch] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: drivers/block/zram/zram_drv.c
* zram: introduce compressing backend abstractionSergey Senozhatsky2016-12-114-0/+237
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZRAM performs direct LZO compression algorithm calls, making it the one and only option. While LZO is generally performs well, LZ4 algorithm tends to have a faster decompression (see http://code.google.com/p/lz4/ for full report) Name Ratio C.speed D.speed MB/s MB/s LZ4 (r101) 2.084 422 1820 LZO 2.06 2.106 414 600 Thus, users who have mostly read (decompress) usage scenarious or mixed workflow (writes with relatively high read ops number) will benefit from using LZ4 compression backend. Introduce compressing backend abstraction zcomp in order to support multiple compression algorithms with the following set of operations: .create .destroy .compress .decompress Schematically zram write() usually contains the following steps: 0) preparation (decompression of partioal IO, etc.) 1) lock buffer_lock mutex (protects meta compress buffers) 2) compress (using meta compress buffers) 3) alloc and map zs_pool object 4) copy compressed data (from meta compress buffers) to object allocated by 3) 5) free previous pool page, assign a new one 6) unlock buffer_lock mutex As we can see, compressing buffers must remain untouched from 1) to 4), because, otherwise, concurrent write() can overwrite data. At the same time, zram_meta must be aware of a) specific compression algorithm memory requirements and b) necessary locking to protect compression buffers. To remove requirement a) new struct zcomp_strm introduced, which contains a compress/decompress `buffer' and compression algorithm `private' part. While struct zcomp implements zcomp_strm stream handling and locking and removes requirement b) from zram meta. zcomp ->create() and ->destroy(), respectively, allocate and deallocate algorithm specific zcomp_strm `private' part. Every zcomp has zcomp stream and mutex to protect its compression stream. Stream usage semantics remains the same -- only one write can hold stream lock and use its buffers. zcomp_strm_find() turns caller into exclusive user of a stream (holding stream mutex until zram release stream), and zcomp_strm_release() makes zcomp stream available (unlock the stream mutex). Hence no concurrent write (compression) operations possible at the moment. iozone -t 3 -R -r 16K -s 60M -I +Z test base patched -------------------------------------------------- Initial write 597992.91 591660.58 Rewrite 609674.34 616054.97 Read 2404771.75 2452909.12 Re-read 2459216.81 2470074.44 Reverse Read 1652769.66 1589128.66 Stride read 2202441.81 2202173.31 Random read 2236311.47 2276565.31 Mixed workload 1423760.41 1709760.06 Random write 579584.08 615933.86 Pwrite 597550.02 594933.70 Pread 1703672.53 1718126.72 Fwrite 1330497.06 1461054.00 Fread 3922851.00 3957242.62 Usage examples: comp = zcomp_create(NAME) /* NAME e.g. "lzo" */ which initialises compressing backend if requested algorithm is supported. Compress: zstrm = zcomp_strm_find(comp) zcomp_compress(comp, zstrm, src, &dst_len) [..] /* copy compressed data */ zcomp_strm_release(comp, zstrm) Decompress: zcomp_decompress(comp, src, src_len, dst); Free compessing backend and its zcomp stream: zcomp_destroy(comp) Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: delete zram_init_device()Sergey Senozhatsky2016-12-111-11/+5
| | | | | | | | | | | | | | | | | | allocate new `zram_meta' in disksize_store() only for uninitialised zram device, saving a number of allocations and deallocations in case if disksize_store() was called on currently used device. at the same time zram_meta stack variable is not necessary, because we can set ->meta directly. there is also no need in setting QUEUE_FLAG_NONROT queue on every disksize_store(), set it once during device creation. [minchan@kernel.org: handle zram->meta alloc fail case] [minchan@kernel.org: prevent lockdep spew of init_lock] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: move zram size warning to documentationSergey Senozhatsky2016-12-111-15/+0
| | | | | | | | | | | | Move zram warning about disksize and size of memory correlation to zram documentation. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: report failed read and write statsSergey Senozhatsky2016-12-111-0/+4
| | | | | | | | | | | | | zram accounted but did not report numbers of failed read and write queries. make these stats available as failed_reads and failed_writes attrs. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove zram stats code duplicationSergey Senozhatsky2016-12-111-59/+23
| | | | | | | | | | | | Introduce ZRAM_ATTR_RO macro that generates device_attribute and default ATTR show() function for existing atomic64_t zram stats. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: use atomic64_t for all zram statsSergey Senozhatsky2016-12-111-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | This is a preparation patch for stats code duplication removal. 1) use atomic64_t for `pages_zero' and `pages_stored' zram stats. 2) `compr_size' and `pages_zero' struct zram_stats members did not follow the existing device attr naming scheme: zram_stats.ATTR has ATTR_show() function. rename them: -- compr_size -> compr_data_size -- pages_zero -> zero_pages Minchan Kim's note: If we really have trouble with atomic stat operation, we could change it with percpu_counter so that it could solve atomic overhead and unnecessary memory space by introducing unsigned long instead of 64bit atomic_t. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove good and bad compress statsSergey Senozhatsky2016-12-111-11/+0
| | | | | | | | | | | | | | | | | | Remove `good' and `bad' compressed sub-requests stats. RW request may cause a number of RW sub-requests. zram used to account `good' compressed sub-queries (with compressed size less than 50% of original size), `bad' compressed sub-queries (with compressed size greater that 75% of original size), leaving sub-requests with compression size between 50% and 75% of original size not accounted and not reported. zram already accounts each sub-request's compression size so we can calculate real device compression ratio. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: do not pass rw argument to __zram_make_request()Sergey Senozhatsky2016-12-111-17/+12
| | | | | | | | | | | | | | | | | | | | Do not pass rw argument down the __zram_make_request() -> zram_bvec_rw() chain, decode it in zram_bvec_rw() instead. Besides, this is the place where we distinguish READ and WRITE bio data directions, so account zram RW stats here, instead of __zram_make_request(). This also allows to account a real number of zram READ/WRITE operations, not just requests (single RW request may cause a number of zram RW ops with separate locking, compression/decompression, etc). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: drivers/block/zram/zram_drv.c
* mlog_logger.c: fix build after removing zram->init_done structDerTeufel2016-12-111-1/+1
|
* zram: drop `init_done' struct zram memberSergey Senozhatsky2016-12-111-10/+11
| | | | | | | | | | | | | Introduce init_done() helper function which allows us to drop `init_done' struct zram member. init_done() uses the fact that ->init_done == 1 equals to ->meta != NULL. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: avoid null access when fail to alloc metaMinchan Kim2016-12-111-0/+2
| | | | | | | | | | | zram_meta_alloc could fail so caller should check it. Otherwise, your system will hang. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove zram->lock in read path and change it with mutexMinchan Kim2016-12-111-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Finally, we separated zram->lock dependency from 32bit stat/ table handling so there is no reason to use rw_semaphore between read and write path so this patch removes the lock from read path totally and changes rw_semaphore with mutex. So, we could do old: read-read: OK read-write: NO write-write: NO Now: read-read: OK read-write: OK write-write: NO The below data proves mixed workload performs well 11 times and there is also enhance on write-write path because current rw-semaphore doesn't support SPIN_ON_OWNER. It's side effect but anyway good thing for us. Write-related tests perform better (from 61% to 1058%) but read path has good/bad(from -2.22% to 1.45%) but they are all marginal within stddev. CPU 12 iozone -t -T -l 12 -u 12 -r 16K -s 60M -I +Z -V 0 ==Initial write ==Initial write records: 10 records: 10 avg: 516189.16 avg: 839907.96 std: 22486.53 (4.36%) std: 47902.17 (5.70%) max: 546970.60 max: 909910.35 min: 481131.54 min: 751148.38 ==Rewrite ==Rewrite records: 10 records: 10 avg: 509527.98 avg: 1050156.37 std: 45799.94 (8.99%) std: 40695.44 (3.88%) max: 611574.27 max: 1111929.26 min: 443679.95 min: 980409.62 ==Read ==Read records: 10 records: 10 avg: 4408624.17 avg: 4472546.76 std: 281152.61 (6.38%) std: 163662.78 (3.66%) max: 4867888.66 max: 4727351.03 min: 4058347.69 min: 4126520.88 ==Re-read ==Re-read records: 10 records: 10 avg: 4462147.53 avg: 4363257.75 std: 283546.11 (6.35%) std: 247292.63 (5.67%) max: 4912894.44 max: 4677241.75 min: 4131386.50 min: 4035235.84 ==Reverse Read ==Reverse Read records: 10 records: 10 avg: 4565865.97 avg: 4485818.08 std: 313395.63 (6.86%) std: 248470.10 (5.54%) max: 5232749.16 max: 4789749.94 min: 4185809.62 min: 3963081.34 ==Stride read ==Stride read records: 10 records: 10 avg: 4515981.80 avg: 4418806.01 std: 211192.32 (4.68%) std: 212837.97 (4.82%) max: 4889287.28 max: 4686967.22 min: 4210362.00 min: 4083041.84 ==Random read ==Random read records: 10 records: 10 avg: 4410525.23 avg: 4387093.18 std: 236693.22 (5.37%) std: 235285.23 (5.36%) max: 4713698.47 max: 4669760.62 min: 4057163.62 min: 3952002.16 ==Mixed workload ==Mixed workload records: 10 records: 10 avg: 243234.25 avg: 2818677.27 std: 28505.07 (11.72%) std: 195569.70 (6.94%) max: 288905.23 max: 3126478.11 min: 212473.16 min: 2484150.69 ==Random write ==Random write records: 10 records: 10 avg: 555887.07 avg: 1053057.79 std: 70841.98 (12.74%) std: 35195.36 (3.34%) max: 683188.28 max: 1096125.73 min: 437299.57 min: 992481.93 ==Pwrite ==Pwrite records: 10 records: 10 avg: 501745.93 avg: 810363.09 std: 16373.54 (3.26%) std: 19245.01 (2.37%) max: 518724.52 max: 833359.70 min: 464208.73 min: 765501.87 ==Pread ==Pread records: 10 records: 10 avg: 4539894.60 avg: 4457680.58 std: 197094.66 (4.34%) std: 188965.60 (4.24%) max: 4877170.38 max: 4689905.53 min: 4226326.03 min: 4095739.72 Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove workqueue for freeing removed pending slotMinchan Kim2016-12-111-48/+6
| | | | | | | | | | | | | | | | | Commit a0c516cbfc74 ("zram: don't grab mutex in zram_slot_free_noity") introduced free request pending code to avoid scheduling by mutex under spinlock and it was a mess which made code lenghty and increased overhead. Now, we don't need zram->lock any more to free slot so this patch reverts it and then, tb_lock should protect it. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: introduce zram->tb_lockMinchan Kim2016-12-111-5/+21
| | | | | | | | | | | | | | | | | | | | | Currently, the zram table is protected by zram->lock but it's rather coarse-grained lock and it makes hard for scalibility. Let's use own rwlock instead of depending on zram->lock. This patch adds new locking so obviously, it would make slow but this patch is just prepartion for removing coarse-grained rw_semaphore(ie, zram->lock) which is hurdle about zram scalability. Final patch in this patchset series will remove the lock from read-path and change rw_semaphore with mutex in write path. With bonus, we could drop pending slot free mess in next patch. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: use atomic operation for statMinchan Kim2016-12-111-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of fields in zram->stats are protected by zram->lock which is rather coarse-grained so let's use atomic operation without explict locking. This patch is ready for removing dependency of zram->lock in read path which is very coarse-grained rw_semaphore. Of course, this patch adds new atomic operation so it might make slow but my 12CPU test couldn't spot any regression. All gain/lose is marginal within stddev. iozone -t -T -l 12 -u 12 -r 16K -s 60M -I +Z -V 0 ==Initial write ==Initial write records: 50 records: 50 avg: 412875.17 avg: 415638.23 std: 38543.12 (9.34%) std: 36601.11 (8.81%) max: 521262.03 max: 502976.72 min: 343263.13 min: 351389.12 ==Rewrite ==Rewrite records: 50 records: 50 avg: 416640.34 avg: 397914.33 std: 60798.92 (14.59%) std: 46150.42 (11.60%) max: 543057.07 max: 522669.17 min: 304071.67 min: 316588.77 ==Read ==Read records: 50 records: 50 avg: 4147338.63 avg: 4070736.51 std: 179333.25 (4.32%) std: 223499.89 (5.49%) max: 4459295.28 max: 4539514.44 min: 3753057.53 min: 3444686.31 ==Re-read ==Re-read records: 50 records: 50 avg: 4096706.71 avg: 4117218.57 std: 229735.04 (5.61%) std: 171676.25 (4.17%) max: 4430012.09 max: 4459263.94 min: 2987217.80 min: 3666904.28 ==Reverse Read ==Reverse Read records: 50 records: 50 avg: 4062763.83 avg: 4078508.32 std: 186208.46 (4.58%) std: 172684.34 (4.23%) max: 4401358.78 max: 4424757.22 min: 3381625.00 min: 3679359.94 ==Stride read ==Stride read records: 50 records: 50 avg: 4094933.49 avg: 4082170.22 std: 185710.52 (4.54%) std: 196346.68 (4.81%) max: 4478241.25 max: 4460060.97 min: 3732593.23 min: 3584125.78 ==Random read ==Random read records: 50 records: 50 avg: 4031070.04 avg: 4074847.49 std: 192065.51 (4.76%) std: 206911.33 (5.08%) max: 4356931.16 max: 4399442.56 min: 3481619.62 min: 3548372.44 ==Mixed workload ==Mixed workload records: 50 records: 50 avg: 149925.73 avg: 149675.54 std: 7701.26 (5.14%) std: 6902.09 (4.61%) max: 191301.56 max: 175162.05 min: 133566.28 min: 137762.87 ==Random write ==Random write records: 50 records: 50 avg: 404050.11 avg: 393021.47 std: 58887.57 (14.57%) std: 42813.70 (10.89%) max: 601798.09 max: 524533.43 min: 325176.99 min: 313255.34 ==Pwrite ==Pwrite records: 50 records: 50 avg: 411217.70 avg: 411237.96 std: 43114.99 (10.48%) std: 33136.29 (8.06%) max: 530766.79 max: 471899.76 min: 320786.84 min: 317906.94 ==Pread ==Pread records: 50 records: 50 avg: 4154908.65 avg: 4087121.92 std: 151272.08 (3.64%) std: 219505.04 (5.37%) max: 4459478.12 max: 4435857.38 min: 3730512.41 min: 3101101.67 Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: remove unnecessary freeMinchan Kim2016-12-111-8/+0
| | | | | | | | | | | | | | | Commit a0c516cbfc74 ("zram: don't grab mutex in zram_slot_free_noity") introduced pending zram slot free in zram's write path in case of missing slot free by memory allocation failure in zram_slot_free_notify but it is not necessary because we have already freed the slot right before overwriting. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: delay pending free request in read pathMinchan Kim2016-12-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Sergey reported we don't need to handle pending free request every I/O so that this patch removes it in read path while we remain it in write path. Let's consider below example. Swap subsystem ask to zram "A" block free by swap_slot_free_notify but zram had been pended it without real freeing. Swap subsystem allocates "A" block for new data but request pended for a long time just handled and zram blindly free new data on the "A" block. :( That's why we couldn't remove handle pending free request right before zram-write. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: fix race between reset and flushing pending workMinchan Kim2016-12-111-2/+2
| | | | | | | | | | | | | | | | | | | Dan and Sergey reported that there is a racy between reset and flushing of pending work so that it could make oops by freeing zram->meta in reset while zram_slot_free can access zram->meta if new request is adding during the race window. This patch moves flush after taking init_lock so it prevents new request so that it closes the race. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* zram: add copyrightMinchan Kim2016-12-111-0/+1
| | | | | | | | | | | | Add my copyright to the zram source code which I maintain. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: drivers/block/zram/zram_drv.h
* zram: remove old private project commentMinchan Kim2016-12-112-2/+0
| | | | | | | | | | | | | Remove the old private compcache project address so upcoming patches should be sent to LKML because we Linux kernel community will take care. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: drivers/block/zram/zram_drv.h
* zram: promote zram from stagingMinchan Kim2016-12-1110-208/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zram has lived in staging for a LONG LONG time and have been fixed/improved by many contributors so code is clean and stable now. Of course, there are lots of product using zram in real practice. The major TV companys have used zram as swap since two years ago and recently our production team released android smart phone with zram which is used as swap, too and recently Android Kitkat start to use zram for small memory smart phone. And there was a report Google released their ChromeOS with zram, too and cyanogenmod have been used zram long time ago. And I heard some disto have used zram block device for tmpfs. In addition, I saw many report from many other peoples. For example, Lubuntu start to use it. The benefit of zram is very clear. With my experience, one of the benefit was to remove jitter of video application with backgroud memory pressure. It would be effect of efficient memory usage by compression but more issue is whether swap is there or not in the system. Recent mobile platforms have used JAVA so there are many anonymous pages. But embedded system normally are reluctant to use eMMC or SDCard as swap because there is wear-leveling and latency issues so if we do not use swap, it means we can't reclaim anoymous pages and at last, we could encounter OOM kill. :( Although we have real storage as swap, it was a problem, too. Because it sometime ends up making system very unresponsible caused by slow swap storage performance. Quote from Luigi on Google "Since Chrome OS was mentioned: the main reason why we don't use swap to a disk (rotating or SSD) is because it doesn't degrade gracefully and leads to a bad interactive experience. Generally we prefer to manage RAM at a higher level, by transparently killing and restarting processes. But we noticed that zram is fast enough to be competitive with the latter, and it lets us make more efficient use of the available RAM. " and he announced. http://www.spinics.net/lists/linux-mm/msg57717.html Other uses case is to use zram for block device. Zram is block device so anyone can format the block device and mount on it so some guys on the internet start zram as /var/tmp. http://forums.gentoo.org/viewtopic-t-838198-start-0.html Let's promote zram and enhance/maintain it instead of removing. Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Nitin Gupta <ngupta@vflare.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: drivers/block/Makefile
* zsmalloc: move it under mmMinchan Kim2016-12-118-1189/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves zsmalloc under mm directory. Before that, description will explain why we have needed custom allocator. Zsmalloc is a new slab-based memory allocator for storing compressed pages. It is designed for low fragmentation and high allocation success rate on large object, but <= PAGE_SIZE allocations. zsmalloc differs from the kernel slab allocator in two primary ways to achieve these design goals. zsmalloc never requires high order page allocations to back slabs, or "size classes" in zsmalloc terms. Instead it allows multiple single-order pages to be stitched together into a "zspage" which backs the slab. This allows for higher allocation success rate under memory pressure. Also, zsmalloc allows objects to span page boundaries within the zspage. This allows for lower fragmentation than could be had with the kernel slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the kernel slab allocator, if a page compresses to 60% of it original size, the memory savings gained through compression is lost in fragmentation because another object of the same size can't be stored in the leftover space. This ability to span pages results in zsmalloc allocations not being directly addressable by the user. The user is given an non-dereferencable handle in response to an allocation request. That handle must be mapped, using zs_map_object(), which returns a pointer to the mapped region that can be used. The mapping is necessary since the object data may reside in two different noncontigious pages. The zsmalloc fulfills the allocation needs for zram perfectly [sjenning@linux.vnet.ibm.com: borrow Seth's quote] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: mm/Kconfig mm/Makefile
* zsmalloc: upstream syncDerTeufel2016-12-113-34/+88
|
* Staging: zram: Fix memory leak by refcount mismatchRashika Kheria2016-12-111-5/+14
| | | | | | | | | | | | | | | As suggested by Minchan Kim and Jerome Marchand "The code in reset_store get the block device (bdget_disk()) but it does not put it (bdput()) when it's done using it. The usage count is therefore incremented but never decremented." This patch also puts bdput() for all error cases. Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Staging: zram: Fix access of NULL pointerRashika Kheria2016-12-111-2/+4
| | | | | | | | | | | | | | | | | | This patch fixes the bug in reset_store caused by accessing NULL pointer. The bdev gets its value from bdget_disk() which could fail when memory pressure is severe and hence can return NULL because allocation of inode in bdget could fail. Hence, this patch introduces a check for bdev to prevent reference to a NULL pointer in the later part of the code. It also removes unnecessary check of bdev for fsync_bdev(). Cc: stable <stable@vger.kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Staging: zram: Fix variable dereferenced before checkRashika Kheria2016-12-111-6/+3
| | | | | | | | | | | This patch fixes the following Smatch warning in zram_drv.c- drivers/staging/zram/zram_drv.c:899 destroy_device() warn: variable dereferenced before check 'zram->disk' (see line 896) Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "staging: zram: Add auto loading of module if user opens /dev/zram."Greg Kroah-Hartman2016-12-111-1/+0
| | | | | | | | | | | | | | | | | | | This reverts commit c70bda992c12e593e411c02a52e4bd6985407539. It's incorrect, Kay writes: Please just remove it. "devname" is meant to be used for single-instance devices with a static dev_t, never for things like zramX. It will not do anything useful here, it does nothing really without a statically assigned dev_t, and it should not be used for devices of this kind anyway. Reported-by: Tom Gundersen <teg@jklm.no> Reported-by: Kay Sievers <kay@vrfy.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* zram: don't grab mutex in zram_slot_free_noityMinchan Kim2016-12-112-3/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [1] introduced down_write in zram_slot_free_notify to prevent race between zram_slot_free_notify and zram_bvec_[read|write]. The race could happen if somebody who has right permission to open swap device is reading swap device while it is used by swap in parallel. However, zram_slot_free_notify is called with holding spin_lock of swap layer so we shouldn't avoid holing mutex. Otherwise, lockdep warns it. This patch adds new list to handle free slot and workqueue so zram_slot_free_notify just registers slot index to be freed and registers the request to workqueue. If workqueue is expired, it holds mutex_lock so there is no problem any more. If any I/O is issued, zram handles pending slot-free request caused by zram_slot_free_notify right before handling issued request because workqueue wouldn't be expired yet so zram I/O request handling function can miss it. Lastly, when zram is reset, flush_work could handle all of pending free request so we shouldn't have memory leak. NOTE: If zram_slot_free_notify's kmalloc with GFP_ATOMIC would be failed, the slot will be freed when next write I/O write the slot. [1] [57ab0485, zram: use zram->lock to protect zram_free_page() in swap free notify path] * from v2 * refactoring * from v1 * totally redesign Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* zram: fix invalid memory accessMinchan Kim2016-12-111-6/+9
| | | | | | | | | | | | | | | | | | [1] tried to fix invalid memory access on zram->disk but it didn't fix properly because get_disk failed during module exit path. Actually, we don't need to reset zram->disk's capacity to zero in module exit path so that this patch introduces new argument "reset_capacity" on zram_reset_divice and it only reset it when reset_store is called. [1] 6030ea9b, zram: avoid invalid memory access in zram_exit() Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Staging: zram: zram_drv.c: Fixed Error of trailing whitespaceKumar Gaurav2016-12-111-1/+1
| | | | | | | Fixed by removing trailing whitespace Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* zram: prevent data loss in error cases of function zram_bvec_write()Sunghan Suh2016-12-111-8/+9
| | | | | | | | | | | | | In function zram_bvec_write(), previous data at the index is already freed by function zram_free_page(). When failed to compress or zs_malloc, there is no way to restore old data. Therefore, free previous data when it's about to update. Also, no need to check whether table is not empty outside of function zram_free_page(), because the function properly checks inside. Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: zram: Add auto loading of module if user opens /dev/zram.Konrad Rzeszutek Wilk2016-12-111-0/+1
| | | | | | | | | | | Greg spotted that said driver is not subscribing to the automagic mechanism of auto-loading if a user tries to open /dev/zram. This fixes it. CC: Minchan Kim <minchan@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: zram: protect zram_reset_device() callSergey Senozhatsky2016-12-111-1/+5
| | | | | | | | | | Commit 9b3bb7abcdf2df0f1b2657e6cbc9d06bc2b3b36f (remove zram_sysfs file (v2)) accidentally made zram_reset_device() racy. Protect zram_reset_device() call with zram->lock. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Jerome Marchand <jmarchand@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fix buildDerTeufel2016-12-112-1/+3
|
generated by cgit v1.2.3 (git 2.39.1) at 2026-03-18 11:44:16 +0000