aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
...
* dm cache: fix a lock-inversionJoe Thornber2018-01-023-52/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When suspending a cache the policy is walked and the individual policy hints written to the metadata via sync_metadata(). This led to this lock order: policy->lock cache_metadata->root_lock When loading the cache target the policy is populated while the metadata lock is held: cache_metadata->root_lock policy->lock Fix this potential lock-inversion (ABBA) deadlock in sync_metadata() by ensuring the cache_metadata root_lock is held whilst all the hints are written, rather than being repeatedly locked while policy->lock is held (as was the case with each callout that policy_walk_mappings() made to the old save_hint() method). Found by turning on the CONFIG_PROVE_LOCKING ("Lock debugging: prove locking correctness") build option. However, it is not clear how the LOCKDEP reported paths can lead to a deadlock since the two paths, suspending a target and loading a target, never occur at the same time. But that doesn't mean the same lock-inversion couldn't have occurred elsewhere. Reported-by: Marian Csontos <mcsontos@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Joe Maples <joe@frap129.org>
* dm cache: prevent corruption caused by discard_block_size > cache_block_sizeMike Snitzer2018-01-021-34/+3
| | | | | | | | | | | | | | | | | | | | | | | | If the discard block size is larger than the cache block size we will not properly quiesce IO to a region that is about to be discarded. This results in a race between a cache migration where no copy is needed, and a write to an adjacent cache block that's within the same large discard block. Workaround this by limiting the discard_block_size to cache_block_size. Also limit the max_discard_sectors to cache_block_size. A more comprehensive fix that introduces range locking support in the bio_prison and proper quiescing of a discard range that spans multiple cache blocks is already in development. Reported-by: Morgan Mears <Morgan.Mears@netapp.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Acked-by: Heinz Mauelshagen <heinzm@redhat.com> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* dm cache: fix race causing dirty blocks to be marked as cleanAnssi Hannula2018-01-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a writeback or a promotion of a block is completed, the cell of that block is removed from the prison, the block is marked as clean, and the clear_dirty() callback of the cache policy is called. Unfortunately, performing those actions in this order allows an incoming new write bio for that block to come in before clearing the dirty status is completed and therefore possibly causing one of these two scenarios: Scenario A: Thread 1 Thread 2 cell_defer() . - cell removed from prison . - detained bios queued . . incoming write bio . remapped to cache . set_dirty() called, . but block already dirty . => it does nothing clear_dirty() . - block marked clean . - policy clear_dirty() called . Result: Block is marked clean even though it is actually dirty. No writeback will occur. Scenario B: Thread 1 Thread 2 cell_defer() . - cell removed from prison . - detained bios queued . clear_dirty() . - block marked clean . . incoming write bio . remapped to cache . set_dirty() called . - block marked dirty . - policy set_dirty() called - policy clear_dirty() called . Result: Block is properly marked as dirty, but policy thinks it is clean and therefore never asks us to writeback it. This case is visible in "dmsetup status" dirty block count (which normally decreases to 0 on a quiet device). Fix these issues by calling clear_dirty() before calling cell_defer(). Incoming bios for that block will then be detained in the cell and released only after clear_dirty() has completed, so the race will not occur. Found by inspecting the code after noticing spurious dirty counts (scenario B). Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* dm cache: fix truncation bug when mapping I/O to >2TB fast deviceHeinz Mauelshagen2018-01-021-2/+3
| | | | | | | | | | | | | | | | | When remapping a block to the cache's fast device that is larger than 2TB we must not truncate the destination sector to 32bits. The 32bit temporary result of from_cblock() was being overflowed in remap_to_cache() due to the logical left shift. Use an intermediate 64bit type to store the 32bit from_cblock() result to fix the overflow. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts since no iters in 3.10] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* dm cache: fix race affecting dirty block countAnssi Hannula2018-01-021-7/+6
| | | | | | | | | | | | | | | | | | | | nr_dirty is updated without locking, causing it to drift so that it is non-zero (either a small positive integer, or a very large one when an underflow occurs) even when there are no actual dirty blocks. This was due to a race between the workqueue and map function accessing nr_dirty in parallel without proper protection. People were seeing under runs due to a race on increment/decrement of nr_dirty, see: https://lkml.org/lkml/2014/6/3/648 Fix this by using an atomic_t for nr_dirty. Reported-by: roma1390@gmail.com Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Joe Maples <joe@frap129.org>
* dm cache: add block sizes and total cache blocks to status outputMike Snitzer2018-01-022-27/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | Improve cache_status to emit: <metadata block size> <#used metadata blocks>/<#total metadata blocks> <cache block size> <#used cache blocks>/<#total cache blocks> ... Adding the block sizes allows for easier calculation of the overall size of both the metadata and cache devices. Adding <#total cache blocks> provides useful context for how much of the cache is used. Unfortunately these additions to the status will require updates to users' scripts that monitor the cache status. But these changes help provide more comprehensive information about the cache device and will simplify tools that are being developed to manage dm-cache devices -- because they won't need to issue 3 operations to cobble together the information that we can easily provide via a single status ioctl. While updating the status documentation in cache.txt spaces were tabify'd. Requested-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Joe Maples <joe@frap129.org>
* dm ioctl: remove double parenthesesMatthias Kaehlcke2018-01-021-2/+2
| | | | | | | | | | | The extra pair of parantheses is not needed and causes clang to generate warnings about the DM_DEV_CREATE_CMD comparison in validate_params(). Also remove another double parentheses that doesn't cause a warning. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Maples <joe@frap129.org>
* checkstack.pl: port to AArch64Kyle McMartin2018-01-011-2/+5
| | | | | | | | | AArch64 stores the frame pointer and return pointer, and decrements the stack. Also remove my (no longer valid) email address. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Change-Id: I166667af088e596ca642632884b75e4348f0d2aa
* ext4: remove duplicate header includeMister Oyster2018-01-011-1/+0
|
* defconfig: don't build ecryptfs & turn off ext4 FBE based encryptionMister Oyster2018-01-011-3/+2
|
* Revert "sdcardfs: fix space leak"Mister Oyster2018-01-011-6/+0
| | | | This reverts commit 7f4eab0e0a02c586b53466dc016f1bbd7b17b69e.
* fs: Mark alloc_fd with EXPORT_SYMBOLJordan Crouse2017-12-311-0/+1
| | | | | | | mark alloc_fd with EXPORT_SYMBOL so it can be used by modules. Change-Id: Ic0dedbadecd2d0937cad8268aaa6eabbc52019ff Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
* fs/file.c: don't acquire files->file_lock in fd_install()Eric Dumazet2017-12-312-19/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mateusz Guzik reported : Currently obtaining a new file descriptor results in locking fdtable twice - once in order to reserve a slot and second time to fill it. Holding the spinlock in __fd_install() is needed in case a resize is done, or to prevent a resize. Mateusz provided an RFC patch and a micro benchmark : http://people.redhat.com/~mguzik/pipebench.c A resize is an unlikely operation in a process lifetime, as table size is at least doubled at every resize. We can use RCU instead of the spinlock. __fd_install() must wait if a resize is in progress. The resize must block new __fd_install() callers from starting, and wait that ongoing install are finished (synchronize_sched()) resize should be attempted by a single thread to not waste resources. rcu_sched variant is used, as __fd_install() and expand_fdtable() run from process context. It gives us a ~30% speedup using pipebench on a dual Intel(R) Xeon(R) CPU E5-2696 v2 @ 2.50GHz Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Mateusz Guzik <mguzik@redhat.com> Acked-by: Mateusz Guzik <mguzik@redhat.com> Tested-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [@nathanchance: Leave out documentation, https://github.com/torvalds/linux/commit/8a81252b774b53e628a8a0fe18e2b8fc236d92cc] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: Fix data corruption for mmap writesJan Kara2017-12-311-2/+16
| | | | | | | | | | | | | | | | | | mpage_submit_page() can race with another process growing i_size and writing data via mmap to the written-back page. As mpage_submit_page() samples i_size too early, it may happen that ext4_bio_write_page() zeroes out too large tail of the page and thus corrupts user data. Fix the problem by sampling i_size only after the page has been write-protected in page tables by clear_page_dirty_for_io() call. Reported-by: Michael Zimmer <michael@swarm64.com> CC: stable@vger.kernel.org Fixes: cb20d5188366f04d96d2e07b1240cc92170ade40 Signed-off-by: Jan Kara <jack@suse.cz> [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* Revert "ext4: fix data corruption for mmap writes"Mister Oyster2017-12-311-19/+5
| | | | This reverts commit 156b66c5bad7fa7621024c2537bfeb48e5a21da0.
* ext4: convert to mbcache2Jan Kara2017-12-314-75/+75
| | | | | | | | | | | The conversion is generally straightforward. The only tricky part is that xattr block corresponding to found mbcache entry can get freed before we get buffer lock for that block. So we have to check whether the entry is still valid after getting buffer lock. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* BACKPORT: [UPSTREAM] ext2: convert to mbcache2Jan Kara2017-12-314-100/+92
| | | | | | | | | | | | | (Cherry-pick from commit be0726d33cb8f411945884664924bed3cb8c70ee) The conversion is generally straightforward. We convert filesystem from a global cache to per-fs one. Similarly to ext4 the tricky part is that xattr block corresponding to found mbcache entry can get freed before we get buffer lock for that block. So we have to check whether the entry is still valid after getting the buffer lock. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* BACKPORT: [UPSTREAM] mbcache2: reimplement mbcacheJan Kara2017-12-313-1/+410
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (Cherry-pick from commit f9a61eb4e2471c56a63cd804c7474128138c38ac) Original mbcache was designed to have more features than what ext? filesystems ended up using. It supported entry being in more hashes, it had a home-grown rwlocking of each entry, and one cache could cache entries from multiple filesystems. This genericity also resulted in more complex locking, larger cache entries, and generally more code complexity. This is reimplementation of the mbcache functionality to exactly fit the purpose ext? filesystems use it for. Cache entries are now considerably smaller (7 instead of 13 longs), the code is considerably smaller as well (414 vs 913 lines of code), and IMO also simpler. The new code is also much more lightweight. I have measured the speed using artificial xattr-bench benchmark, which spawns P processes, each process sets xattr for F different files, and the value of xattr is randomly chosen from a pool of V values. Averages of runtimes for 5 runs for various combinations of parameters are below. The first value in each cell is old mbache, the second value is the new mbcache. V=10 F\P 1 2 4 8 16 32 64 10 0.158,0.157 0.208,0.196 0.500,0.277 0.798,0.400 3.258,0.584 13.807,1.047 61.339,2.803 100 0.172,0.167 0.279,0.222 0.520,0.275 0.825,0.341 2.981,0.505 12.022,1.202 44.641,2.943 1000 0.185,0.174 0.297,0.239 0.445,0.283 0.767,0.340 2.329,0.480 6.342,1.198 16.440,3.888 V=100 F\P 1 2 4 8 16 32 64 10 0.162,0.153 0.200,0.186 0.362,0.257 0.671,0.496 1.433,0.943 3.801,1.345 7.938,2.501 100 0.153,0.160 0.221,0.199 0.404,0.264 0.945,0.379 1.556,0.485 3.761,1.156 7.901,2.484 1000 0.215,0.191 0.303,0.246 0.471,0.288 0.960,0.347 1.647,0.479 3.916,1.176 8.058,3.160 V=1000 F\P 1 2 4 8 16 32 64 10 0.151,0.129 0.210,0.163 0.326,0.245 0.685,0.521 1.284,0.859 3.087,2.251 6.451,4.801 100 0.154,0.153 0.211,0.191 0.276,0.282 0.687,0.506 1.202,0.877 3.259,1.954 8.738,2.887 1000 0.145,0.179 0.202,0.222 0.449,0.319 0.899,0.333 1.577,0.524 4.221,1.240 9.782,3.579 V=10000 F\P 1 2 4 8 16 32 64 10 0.161,0.154 0.198,0.190 0.296,0.256 0.662,0.480 1.192,0.818 2.989,2.200 6.362,4.746 100 0.176,0.174 0.236,0.203 0.326,0.255 0.696,0.511 1.183,0.855 4.205,3.444 19.510,17.760 1000 0.199,0.183 0.240,0.227 1.159,1.014 2.286,2.154 6.023,6.039 ---,10.933 ---,36.620 V=100000 F\P 1 2 4 8 16 32 64 10 0.171,0.162 0.204,0.198 0.285,0.230 0.692,0.500 1.225,0.881 2.990,2.243 6.379,4.771 100 0.151,0.171 0.220,0.210 0.295,0.255 0.720,0.518 1.226,0.844 3.423,2.831 19.234,17.544 1000 0.192,0.189 0.249,0.225 1.162,1.043 2.257,2.093 5.853,4.997 ---,10.399 ---,32.198 We see that the new code is faster in pretty much all the cases and starting from 4 processes there are significant gains with the new code resulting in upto 20-times shorter runtimes. Also for large numbers of cached entries all values for the old code could not be measured as the kernel started hitting softlockups and died before the test completed. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* BACKPORT: [UPSTREAM] mm: new shrinker APIDave Chinner2017-12-312-29/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (Cherry-pick from commit 24f7c6b981fb70084757382da464ea85d72af300) The current shrinker callout API uses an a single shrinker call for multiple functions. To determine the function, a special magical value is passed in a parameter to change the behaviour. This complicates the implementation and return value specification for the different behaviours. Separate the two different behaviours into separate operations, one to return a count of freeable objects in the cache, and another to scan a certain number of objects in the cache for freeing. In defining these new operations, ensure the return values and resultant behaviours are clearly defined and documented. Modify shrink_slab() to use the new API and implement the callouts for all the existing shrinkers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* ext4: iterate over buffer heads correctly in move_extent_per_page()Eryu Guan2017-12-311-0/+1
| | | | | | | | | | | | | In commit bcff24887d00 ("ext4: don't read blocks from disk after extents being swapped") bh is not updated correctly in the for loop and wrong data has been written to disk. generic/324 catches this on sub-page block size ext4. Fixes: bcff24887d00 ("ext4: don't read blocks from disk after extentsbeing swapped") Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: enforce online defrag restriction for encrypted filesEric Whitney2017-12-311-0/+8
| | | | | | | | | | | | | | | | Online defragging of encrypted files is not currently implemented. However, the move extent ioctl can still return successfully when called. For example, this occurs when xfstest ext4/020 is run on an encrypted file system, resulting in a corrupted test file and a corresponding test failure. Until the proper functionality is implemented, fail the move extent ioctl if either the original or donor file is encrypted. Cc: stable@vger.kernel.org Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: don't read blocks from disk after extents being swappedEryu Guan2017-12-311-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I notice ext4/307 fails occasionally on ppc64 host, reporting md5 checksum mismatch after moving data from original file to donor file. The reason is that move_extent_per_page() calls __block_write_begin() and block_commit_write() to write saved data from original inode blocks to donor inode blocks, but __block_write_begin() not only maps buffer heads but also reads block content from disk if the size is not block size aligned. At this time the physical block number in mapped buffer head is pointing to the donor file not the original file, and that results in reading wrong data to page, which get written to disk in following block_commit_write call. This also can be reproduced by the following script on 1k block size ext4 on x86_64 host: mnt=/mnt/ext4 donorfile=$mnt/donor testfile=$mnt/testfile e4compact=~/xfstests/src/e4compact rm -f $donorfile $testfile # reserve space for donor file, written by 0xaa and sync to disk to # avoid EBUSY on EXT4_IOC_MOVE_EXT xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile # create test file written by 0xbb xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile # compute initial md5sum md5sum $testfile | tee md5sum.txt # drop cache, force e4compact to read data from disk echo 3 > /proc/sys/vm/drop_caches # test defrag echo "$testfile" | $e4compact -i -v -f $donorfile # check md5sum md5sum -c md5sum.txt Fix it by creating & mapping buffer heads only but not reading blocks from disk, because all the data in page is guaranteed to be up-to-date in mext_page_mkuptodate(). Cc: stable@vger.kernel.org Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: evict inline data when writing to memory mapEric Biggers2017-12-311-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the case of writing via mmap to a file with inline data is not handled. This is maybe a rare case since it requires a writable memory map of a very small file, but it is trivial to trigger with on inline_data filesystem, and it causes the 'BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA));' in ext4_writepages() to be hit: mkfs.ext4 -O inline_data /dev/vdb mount /dev/vdb /mnt xfs_io -f /mnt/file \ -c 'pwrite 0 1' \ -c 'mmap -w 0 1m' \ -c 'mwrite 0 1' \ -c 'fsync' kernel BUG at fs/ext4/inode.c:2723! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 2532 Comm: xfs_io Not tainted 4.11.0-rc1-xfstests-00301-g071d9acf3d1f #633 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff88003d3a8040 task.stack: ffffc90000300000 RIP: 0010:ext4_writepages+0xc89/0xf8a RSP: 0018:ffffc90000303ca0 EFLAGS: 00010283 RAX: 0000028410000000 RBX: ffff8800383fa3b0 RCX: ffffffff812afcdc RDX: 00000a9d00000246 RSI: ffffffff81e660e0 RDI: 0000000000000246 RBP: ffffc90000303dc0 R08: 0000000000000002 R09: 869618e8f99b4fa5 R10: 00000000852287a2 R11: 00000000a03b49f4 R12: ffff88003808e698 R13: 0000000000000000 R14: 7fffffffffffffff R15: 7fffffffffffffff FS: 00007fd3e53094c0(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3e4c51000 CR3: 000000003d554000 CR4: 00000000003406e0 Call Trace: ? _raw_spin_unlock+0x27/0x2a ? kvm_clock_read+0x1e/0x20 do_writepages+0x23/0x2c ? do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x80/0x87 filemap_write_and_wait_range+0x67/0x8c ext4_sync_file+0x20e/0x472 vfs_fsync_range+0x8e/0x9f ? syscall_trace_enter+0x25b/0x2d0 vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 do_syscall_64+0x69/0x131 entry_SYSCALL64_slow_path+0x25/0x25 We could try to be smart and keep the inline data in this case, or at least support delayed allocation when allocating the block, but these solutions would be more complicated and don't seem worthwhile given how rare this case seems to be. So just fix the bug by calling ext4_convert_inline_data() when we're asked to make a page writable, so that any inline data gets evicted, with the block allocated immediately. Reported-by: Nick Alcock <nick.alcock@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix crashes in dioread_nolock modeJan Kara2017-12-311-20/+20
| | | | | | | | | | | | | | | | | | | Competing overwrite DIO in dioread_nolock mode will just overwrite pointer to io_end in the inode. This may result in data corruption or extent conversion happening from IO completion interrupt because we don't properly set buffer_defer_completion() when unlocked DIO races with locked DIO to unwritten extent. Since unlocked DIO doesn't need io_end for anything, just avoid allocating it and corrupting pointer from inode for locked DIO. A cleaner fix would be to avoid these games with io_end pointer from the inode but that requires more intrusive changes so we leave that for later. Cc: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: bugfix for mmaped pages in mpage_release_unused_pages()wangguang2017-12-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pages clear buffers after ext4 delayed block allocation failed, However, it does not clean its pte_dirty flag. if the pages unmap ,in cording to the pte_dirty , unmap_page_range may try to call __set_page_dirty, which may lead to the bugon at mpage_prepare_extent_to_map:head = page_buffers(page);. This patch just call clear_page_dirty_for_io to clean pte_dirty at mpage_release_unused_pages for pages mmaped. Steps to reproduce the bug: （1） mmap a file in ext4 addr = (char *)mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); memset(addr, 'i', 4096); （2） return EIO at ext4_writepages->mpage_map_and_submit_extent->mpage_map_one_extent which causes this log message to be print: ext4_msg(sb, KERN_CRIT, "Delayed block allocation failed for " "inode %lu at logical offset %llu with" " max blocks %u with error %d", inode->i_ino, (unsigned long long)map->m_lblk, (unsigned)map->m_len, -err); (3）Unmap the addr cause warning at __set_page_dirty:WARN_ON_ONCE(warn && !PageUptodate(page)); (4) wait for a minute,then bugon happen. Cc: stable@vger.kernel.org Signed-off-by: wangguang <wangguang03@zte.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix bh->b_state corruptionJan Kara2017-12-311-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | ext4 can update bh->b_state non-atomically in _ext4_get_block() and ext4_da_get_block_prep(). Usually this is fine since bh is just a temporary storage for mapping information on stack but in some cases it can be fully living bh attached to a page. In such case non-atomic update of bh->b_state can race with an atomic update which then gets lost. Usually when we are mapping bh and thus updating bh->b_state non-atomically, nobody else touches the bh and so things work out fine but there is one case to especially worry about: ext4_finish_bio() uses BH_Uptodate_Lock on the first bh in the page to synchronize handling of PageWriteback state. So when blocksize < pagesize, we can be atomically modifying bh->b_state of a buffer that actually isn't under IO and thus can race e.g. with delalloc trying to map that buffer. The result is that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock. Fix the problem by always updating bh->b_state bits atomically. CC: stable@vger.kernel.org Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix inline data error pathsTheodore Ts'o2017-12-312-6/+23
| | | | | | | | | | | The write_end() function must always unlock the page and drop its ref count, even on an error. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: clean up error handling when orphan list is corruptedTheodore Ts'o2017-12-311-24/+22
| | | | | | | | | | | | Instead of just printing warning messages, if the orphan list is corrupted, declare the file system is corrupted. If there are any reserved inodes in the orphaned inode list, declare the file system corrupted and stop right away to avoid doing more potential damage to the file system. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix oops on corrupted filesystemJan Kara2017-12-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When filesystem is corrupted in the right way, it can happen ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we subsequently remove inode from the in-memory orphan list. However this deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we leave i_orphan list_head with a stale content. Later we can look at this content causing list corruption, oops, or other issues. The reported trace looked like: WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100() list_del corruption, 0000000061c1d6e0->next is LIST_POISON1 0000000000100100) CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250 Stack: 60462947 62219960 602ede24 62219960 602ede24 603ca293 622198f0 602f02eb 62219950 6002c12c 62219900 601b4d6b Call Trace: [<6005769c>] ? vprintk_emit+0x2dc/0x5c0 [<602ede24>] ? printk+0x0/0x94 [<600190bc>] show_stack+0xdc/0x1a0 [<602ede24>] ? printk+0x0/0x94 [<602ede24>] ? printk+0x0/0x94 [<602f02eb>] dump_stack+0x2a/0x2c [<6002c12c>] warn_slowpath_common+0x9c/0xf0 [<601b4d6b>] ? __list_del_entry+0x6b/0x100 [<6002c254>] warn_slowpath_fmt+0x94/0xa0 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0 [<60023ebf>] ? set_signals+0x3f/0x50 [<600a205a>] ? kmem_cache_free+0x10a/0x180 [<602f4e88>] ? mutex_lock+0x18/0x30 [<601b4d6b>] __list_del_entry+0x6b/0x100 [<601177ec>] ext4_orphan_del+0x22c/0x2f0 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0 [<6010b973>] ? ext4_truncate+0x383/0x390 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0 [<6001bb50>] ? copy_from_user+0x0/0xb0 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0 [<60072c4f>] generic_perform_write+0xaf/0x1e0 [<600c4166>] ? file_update_time+0x46/0x110 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0 [<6010030f>] ext4_file_write_iter+0x15f/0x470 [<60094e10>] ? unlink_file_vma+0x0/0x70 [<6009b180>] ? unlink_anon_vmas+0x0/0x260 [<6008f169>] ? free_pgtables+0xb9/0x100 [<600a6030>] __vfs_write+0xb0/0x130 [<600a61d5>] vfs_write+0xa5/0x170 [<600a63d6>] SyS_write+0x56/0xe0 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0 [<6001b698>] handle_syscall+0x68/0x90 [<6002633d>] userspace+0x4fd/0x600 [<6002274f>] ? save_registers+0x1f/0x40 [<60028bd7>] ? arch_prctl+0x177/0x1b0 [<60017bd5>] fork_handler+0x85/0x90 Fix the problem by using list_del_init() as we always should with i_orphan list. CC: stable@vger.kernel.org Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix data corruption with EXT4_GET_BLOCKS_ZEROJan Kara2017-12-311-43/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: validate s_reserved_gdt_blocks on mountTheodore Ts'o2017-12-312-0/+10
| | | | | | | | | | | | | | | | | If s_reserved_gdt_blocks is extremely large, it's possible for ext4_init_block_bitmap(), which is called when ext4 sets up an uninitialized block bitmap, to corrupt random kernel memory. Add the same checks which e2fsck has --- it must never be larger than blocksize / sizeof(__u32) --- and then add a backup check in ext4_init_block_bitmap() in case the superblock gets modified after the file system is mounted. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: ignore quota mount options if the quota feature is enabledTheodore Ts'o2017-12-311-11/+11
| | | | | | | | | | | | | | | | Previously, ext4 would fail the mount if the file system had the quota feature enabled and quota mount options (used for the older quota setups) were present. This broke xfstests, since xfs silently ignores the usrquote and grpquota mount options if they are specified. This commit changes things so that we are consistent with xfs; having the mount options specified is harmless, so no sense break users by forbidding them. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> [@nathanchance: fixed conflicts] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: don't save the error information if the block device is read-onlyTheodore Ts'o2017-12-311-0/+2
| | | | | | | | | | | | | | | | .... because otherwise a corrupted root file file system (caused by flash corruption, etc.) will result in the device becoming bricked after an attempted OTA update --- which can only be recovered by a custom recovery image manually flashed onto the device (or a warantee return). Cherry picked from android-common 3.10 branch: 00a6e4dfa BUG=20939131 Change-Id: I7d5fe852c30efc35aa39fba7f708a22c034a1839 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: "Theodore Ts'o" <tytso@google.com>
* UPSTREAM: ext4: fix potential use after free in __ext4_journal_stopLukas Czerner2017-12-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd63b125dee8b15c705216d7186daea4625 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd63b125dee8b15c705216d7186daea4625 Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org (cherry picked from commit 6934da9238da947628be83635e365df41064b09b) Signed-off-by: Bernie Thompson <bhthompson@google.com> Change-Id: I788135d7558d1c6ddcdef4366e106b17e9df80a5 Reviewed-on: https://chromium-review.googlesource.com/412985 Commit-Ready: Bernie Thompson <bhthompson@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Joe Maples <joe@frap129.org>
* UPSTREAM: ext4: fix NULL pointer dereference when journal restart failsLukas Czerner2017-12-312-9/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Cc: stable@vger.kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> (cherry picked from commit 9d506594069355d1fb2de3f9104667312ff08ed3) Signed-off-by: Bernie Thompson <bhthompson@google.com> Change-Id: Ic0b0f902ccbacb6d5f3388e601464e203b78ccf0 Reviewed-on: https://chromium-review.googlesource.com/412984 Commit-Ready: Bernie Thompson <bhthompson@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: reject journal options for ext2 mountsCarlos Maiolino2017-12-311-3/+3
| | | | | | | | | | There is no reason to allow ext2 filesystems be mounted with journal mount options. So, this patch adds them to the MOPT_NO_EXT2 mount options list. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* fs/ext4/super.c: use strreplace() in ext4_fill_super()Rasmus Villemoes2017-12-311-3/+1
| | | | | | | | | | This makes a very large function a little smaller. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: move procfs registration code to fs/ext4/sysfs.cTheodore Ts'o2017-12-316-106/+77
| | | | | | | | | | This allows us to refactor the procfs code, which saves a bit of compiled space. More importantly it isolates most of the procfs support code into a single file, so it's easier to #ifdef it out if the proc file system has been disabled. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: refactor sysfs support codeTheodore Ts'o2017-12-311-133/+128
| | | | | | | | Make the code more easily extensible as well as taking up less compiled space. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: move sysfs code from super.c to fs/ext4/sysfs.cTheodore Ts'o2017-12-314-410/+410
| | | | | | | | | Also statically allocate the ext4_kset and ext4_feat objects, since we only need exactly one of each, and it's simpler and less code if we drop the dynamic allocation and deallocation when it's not needed. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: optimize ext4_writepage() for attempted 4k delalloc writesTheodore Ts'o2017-12-311-1/+12
| | | | | | | | | | | | | | In cases where the file system block size is the same as the page size, and ext4_writepage() is asked to write out a page which is either has the unwritten bit set in the extent tree, or which does not yet have a block assigned due to delayed allocation, we can bail out early and, unlocking the page earlier and avoiding a round trip through ext4_bio_write_page() with the attendant calls to set_page_writeback() and redirty_page_for_writeback(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix an endianness bug in ext4_encrypted_follow_link()Al Viro2017-12-311-1/+1
| | | | | | | | | applying le32_to_cpu() to 16bit value is a bad idea... Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: fix an endianness bug in ext4_encrypted_zeroout()Al Viro2017-12-311-1/+1
| | | | | | | | | | | | | ex->ee_block is not host-endian (note that accesses of other fields of *ex right next to that line go through the helpers that do proper conversion from little-endian to host-endian; it might make sense to add similar for ->ee_block to avoid reintroducing that kind of bugs...) Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: remove unused definition for MAX_32_NUMFabian Frederick2017-12-311-2/+0
| | | | | | | | MAX_32_NUM isn't used in ext4 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: create EXT4_MAX_BLOCKS() macroFabian Frederick2017-12-313-14/+7
| | | | | | | | | Create a macro to calculate length + offset -> maximum blocks This adds more readability. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: improve ext4lazyinit scalabilityDmitry Monakhov2017-12-311-10/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ext4lazyinit is a global thread. This thread performs itable initalization under li_list_mtx mutex. It basically does the following: ext4_lazyinit_thread ->mutex_lock(&eli->li_list_mtx); ->ext4_run_li_request(elr) ->ext4_init_inode_table-> Do a lot of IO if the list is large And when new mount/umount arrive they have to block on ->li_list_mtx because lazy_thread holds it during full walk procedure. ext4_fill_super ->ext4_register_li_request ->mutex_lock(&ext4_li_info->li_list_mtx); ->list_add(&elr->lr_request, &ext4_li_info >li_request_list); In my case mount takes 40minutes on server with 36 * 4Tb HDD. Common user may face this in case of very slow dev ( /dev/mmcblkXXX) Even more. If one of filesystems was frozen lazyinit_thread will simply block on sb_start_write() so other mount/umount will be stuck forever. This patch changes logic like follows: - grab ->s_umount read sem before processing new li_request. After that it is safe to drop li_list_mtx because all callers of li_remove_request are holding ->s_umount for write. - li_thread skips frozen SB's Locking order: Mh KOrder is asserted by umount path like follows: s_umount ->li_list_mtx so the only way to to grab ->s_mount inside li_thread is via down_read_trylock xfstests:ext4/023 #PSBM-49658 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: remove checks for e_value_blockJan Kara2017-12-311-8/+7
| | | | | | | | | | | | Currently we don't support xattrs with e_value_block set. We don't allow them to pass initial xattr check so there's no point for checking for this later. Since these tests were untested, bugs were creeping in and not all places which should have checked were checking e_value_block anyway. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: explicit mount options parsing cleanupDmitry Monakhov2017-12-311-2/+6
| | | | | | | | | | Currently MOPT_EXPLICIT treated as EXPLICIT_DELALLOC which may be changed in future. Let's fix it now. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Pranav Vashi <neobuddy89@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: don't manipulate recovery flag when freezing no-journal fsEric Sandeen2017-12-311-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c642dc9e1aaed953597e7092d7df329e6234096e ] At some point along this sequence of changes: f6e63f9 ext4: fold ext4_nojournal_sops into ext4_sops bb04457 ext4: support freezing ext2 (nojournal) file systems 9ca9238 ext4: Use separate super_operations structure for no_journal filesystems ext4 started setting needs_recovery on filesystems without journals when they are unfrozen. This makes no sense, and in fact confuses blkid to the point where it doesn't recognize the filesystem at all. (freeze ext2; unfreeze ext2; run blkid; see no output; run dumpe2fs, see needs_recovery set on fs w/ no journal). To fix this, don't manipulate the INCOMPAT_RECOVER feature on filesystems without journals. Reported-by: Stu Mark <smark@datto.com> Reviewed-by: Jan Kara <jack@suse.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Pranav Vashi <neobuddy89@gmail.com> Signed-off-by: Joe Maples <joe@frap129.org>
* ext4: Check that external xattr value block is zeroJan Kara2017-12-311-0/+2
| | | | | | | | | | | Currently we don't support xattrs with values stored out of line. Check for that in ext4_xattr_check_names() to make sure we never work with such xattrs since not all the code counts with that resulting is possible weird corruption issues. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Joe Maples <joe@frap129.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-03-17 04:07:09 +0000