aboutsummaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
...
* mac80211: Fix adding of mesh vendor IEsThorsten Horstmann2017-06-171-1/+1
| | | | | | | | | | | | | | | | | | | commit da7061c82e4a1bc6a5e134ef362c86261906c860 upstream. The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The return value in mesh_add_vendor_ies must therefore be checked against ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with WLAN_EID_VENDOR_SPECIFIC will be rejected. Fixes: 082ebb0c258d ("mac80211: fix mesh beacon format") Signed-off-by: Thorsten Horstmann <thorsten@defutech.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: Add commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset writeDave Martin2017-06-171-1/+1
| | | | | | | | | | | | | | commit 228dbbfb5d77f8e047b2a1d78da14b7158433027 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 5be6f62b0059 ("ARM: 6883/1: ptrace: Migrate to regsets framework") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Willy Tarreau <w@1wt.eu>
* svcrpc: fix oops in absence of krb5 moduleJ. Bruce Fields2017-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 034dd34ff4916ec1f8f74e39ca3efb04eab2f791 upstream. Olga Kornievskaia says: "I ran into this oops in the nfsd (below) (4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try to mount the server with krb5 where the server doesn't have the rpcsec_gss_krb5 module built." The problem is that rsci.cred is copied from a svc_cred structure that gss_proxy didn't properly initialize. Fix that. [120408.542387] general protection fault: 0000 [#1] SMP ... [120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16 [120408.567037] Hardware name: VMware, Inc. VMware Virtual = Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000 [120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss] ... [120408.584946] ? rsc_free+0x55/0x90 [auth_rpcgss] [120408.585901] gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss] [120408.587017] svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss] [120408.588257] ? __enqueue_entity+0x6c/0x70 [120408.589101] svcauth_gss_accept+0x391/0xb90 [auth_rpcgss] [120408.590212] ? try_to_wake_up+0x4a/0x360 [120408.591036] ? wake_up_process+0x15/0x20 [120408.592093] ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc] [120408.593177] svc_authenticate+0xe1/0x100 [sunrpc] [120408.594168] svc_process_common+0x203/0x710 [sunrpc] [120408.595220] svc_process+0x105/0x1c0 [sunrpc] [120408.596278] nfsd+0xe9/0x160 [nfsd] [120408.597060] kthread+0x101/0x140 [120408.597734] ? nfsd_destroy+0x60/0x60 [nfsd] [120408.598626] ? kthread_park+0x90/0x90 [120408.599448] ret_from_fork+0x22/0x30 Fixes: 1d658336b05f "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth" Cc: Simo Sorce <simo@redhat.com> Reported-by: Olga Kornievskaia <kolga@netapp.com> Tested-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* tcp: initialize max window for a new fastopen socketAlexey Kodanev2017-06-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0dbd7ff3ac5017a46033a9d0a87a8267d69119d9 upstream. Found that if we run LTP netstress test with large MSS (65K), the first attempt from server to send data comparable to this MSS on fastopen connection will be delayed by the probe timer. Here is an example: < S seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32 > S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0 < . ack 1 win 342 length 0 Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now', as well as in 'size_goal'. This results the segment not queued for transmition until all the data copied from user buffer. Then, inside __tcp_push_pending_frames(), it breaks on send window test and continues with the check probe timer. Fragmentation occurs in tcp_write_wakeup()... +0.2 > P. seq 1:43777 ack 1 win 342 length 43776 < . ack 43777, win 1365 length 0 > P. seq 43777:65001 ack 1 win 342 options [...] length 21224 ... This also contradicts with the fact that we should bound to the half of the window if it is large. Fix this flaw by correctly initializing max_window. Before that, it could have large values that affect further calculations of 'size_goal'. [js] the code is in tcp_ipv4.c in 3.12 yet Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Willy Tarreau <w@1wt.eu>
* net: fix harmonize_features() vs NETIF_F_HIGHDMAEric Dumazet2017-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | commit 7be2c82cfd5d28d7adb66821a992604eb6dd112e upstream. Ashizuka reported a highmem oddity and sent a patch for freescale fec driver. But the problem root cause is that core networking stack must ensure no skb with highmem fragment is ever sent through a device that does not assert NETIF_F_HIGHDMA in its features. We need to call illegal_highdma() from harmonize_features() regardless of CSUM checks. Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin Shelar <pshelar@ovn.org> Reported-by: "Ashizuka, Yuusuke" <ashiduka@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Willy Tarreau <w@1wt.eu>
* platform/x86: intel_mid_powerbtn: Set IRQ_ONESHOTAndy Shevchenko2017-06-171-2/+2
| | | | | | | | | | | | | | commit 5a00b6c2438460b870a451f14593fc40d3c7edf6 upstream. The commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") starts refusing misconfigured interrupt handlers. This makes intel_mid_powerbtn not working anymore. Add a mandatory flag to a threaded IRQ request in the driver. Fixes: 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* s5k4ecgx: select CRC32 helperArnd Bergmann2017-06-171-0/+1
| | | | | | | | | | | | | | | | | | commit c739c0a7c3c2472d7562b8f802cdce44d2597c8b upstream. A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* drm/i915: Don't leak edid in intel_crt_detect_ddc()Ander Conselvan de Oliveira2017-06-171-4/+5
| | | | | | | | | | | | | | | | | | | | commit c34f078675f505c4437919bb1897b1351f16a050 upstream. In the path where intel_crt_detect_ddc() detects a CRT, if would return true without freeing the edid. Fixes: a2bd1f541f19 ("drm/i915: check whether we actually received an edid in detect_ddc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-1-git-send-email-ander.conselvan.de.oliveira@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* crypto: caam - fix non-hmac hashesRussell King2017-06-171-0/+1
| | | | | | | | | | | | | | | | | commit a0118c8b2be9297aed8e915c60b4013326b256d4 upstream. Since 6de62f15b581 ("crypto: algif_hash - Require setkey before accept(2)"), the AF_ALG interface requires userspace to provide a key to any algorithm that has a setkey method. However, the non-HMAC algorithms are not keyed, so setting a key is unnecessary. Fix this by removing the setkey method from the non-keyed hash algorithms. Fixes: 6de62f15b581 ("crypto: algif_hash - Require setkey before accept(2)") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Willy Tarreau <w@1wt.eu>
* fuse: do not use iocb after it may have been freedRobert Doebbelin2017-06-171-2/+3
| | | | | | | | | | | | | | | | | | | commit 7cabc61e01a0a8b663bd2b4c982aa53048218734 upstream. There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an iocb that could have been freed if async io has already completed. The fix in this case is simple and obvious: cache the result before starting io. It was discovered by KASan: Kernel: ================================================================== Kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390 Signed-off-by: Robert Doebbelin <robert@quobyte.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: bcba24ccdc82 ("fuse: enable asynchronous processing direct IO") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ite-cir: initialize use_demodulator before using itNicolas Iooss2017-06-171-0/+2
| | | | | | | | | | | | | | | | | | commit 7ec03e60ef81c19b5d3a46dd070ee966774b860f upstream. Function ite_set_carrier_params() uses variable use_demodulator after having initialized it to false in some if branches, but this variable is never set to true otherwise. This bug has been found using clang -Wsometimes-uninitialized warning flag. Fixes: 620a32bba4a2 ("[media] rc: New rc-based ite-cir driver for several ITE CIRs") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ARM: ux500: fix prcmu_is_cpu_in_wfi() calculationArnd Bergmann2017-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | commit f0e8faa7a5e894b0fc99d24be1b18685a92ea466 upstream. This function clearly never worked and always returns true, as pointed out by gcc-7: arch/arm/mach-ux500/pm.c: In function 'prcmu_is_cpu_in_wfi': arch/arm/mach-ux500/pm.c:137:212: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] With the added braces, the condition actually makes sense. Fixes: 34fe6f107eab ("mfd : Check if the other db8500 core is in WFI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fieldsDave Martin2017-06-171-0/+4
| | | | | | | | | | | | | | | | commit ad9e202aa1ce571b1d7fed969d06f66067f8a086 upstream. We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* arm64/ptrace: Avoid uninitialised struct padding in fpr_set()Dave Martin2017-06-171-0/+1
| | | | | | | | | | | | | | | | | commit aeb1f39d814b2e21e5e5706a48834bfd553d0059 upstream. This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Fixes: 60ffc30d5652 ("arm64: Exception handling") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* arm64/ptrace: Preserve previous registers for short regset writeDave Martin2017-06-171-3/+4
| | | | | | | | | | | | | | commit 9a17b876b573441bfb3387ad55d98bf7184daf9d upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ubifs: Fix journal replay wrt. xattr nodesRichard Weinberger2017-06-171-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1cb51a15b576ee325d527726afff40947218fd5e upstream. When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Reported-by: Rock Lee <rockdotlee@gmail.com> Reviewed-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Willy Tarreau <w@1wt.eu>
* mtd: nand: xway: disable module supportHauke Mehrtens2017-06-171-1/+1
| | | | | | | | | | | | | | commit 73529c872a189c747bdb528ce9b85b67b0e28dec upstream. The xway_nand driver accesses the ltq_ebu_membase symbol which is not exported. This also should not get exported and we should handle the EBU interface in a better way later. This quick fix just deactivated support for building as module. Fixes: 99f2b107924c ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* mmc: mxs-mmc: Fix additional cycles after transmission stopStefan Wahren2017-06-171-2/+4
| | | | | | | | | | | | | | commit 01167c7b9cbf099c69fe411a228e4e9c7104e123 upstream. According to the code the intention is to append 8 SCK cycles instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this will never happened because it's an AC command not an ADTC command. So fix this by moving the statement into the right function. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* svcrpc: don't leak contexts on PROC_DESTROYJ. Bruce Fields2017-06-171-1/+1
| | | | | | | | | | | | | | | | | commit 78794d1890708cf94e3961261e52dcec2cc34722 upstream. Context expiry times are in units of seconds since boot, not unix time. The use of get_seconds() here therefore sets the expiry time decades in the future. This prevents timely freeing of contexts destroyed by client RPC_GSS_PROC_DESTROY requests. We'd still free them eventually (when the module is unloaded or the container shut down), but a lot of contexts could pile up before then. Fixes: c5b29f885afe "sunrpc: use seconds since boot in expiry cache" Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ARM: dts: imx31: fix clock control module interrupts descriptionVladimir Zapolskiy2017-06-172-2/+2
| | | | | | | | | | | | | | commit 2e575cbc930901718cc18e084566ecbb9a4b5ebb upstream. The type of AVIC interrupt controller found on i.MX31 is one-cell, namely 31 for CCM DVFS and 53 for CCM, however for clock control module its interrupts are specified as 3-cells, fix it. Fixes: ef0e4a606fb6 ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* perf scripting: Avoid leaking the scripting_context variableArnaldo Carvalho de Melo2017-06-171-2/+4
| | | | | | | | | | | | | | | | | | commit cf346d5bd4b9d61656df2f72565c9b354ef3ca0d upstream. Both register_perl_scripting() and register_python_scripting() allocate this variable, fix it by checking if it already was. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 7e4b21b84c43 ("perf/scripts: Add Python scripting engine") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* IB/mlx4: Fix port query for 56Gb Ethernet linksSaeed Mahameed2017-06-171-3/+5
| | | | | | | | | | | | | | | | commit 6fa26208206c406fa529cd73f7ae6bf4181e270b upstream. Report the correct speed in the port attributes when using a 56Gbps ethernet link. Without this change the field is incorrectly set to 10. Fixes: a9c766bb75ee ('IB/mlx4: Fix info returned when querying IBoE ports') Fixes: 2e96691c31ec ('IB: Use central enum for speed instead of hard-coded values') Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* IB/mlx4: Set traffic class in AHMaor Gottlieb2017-06-171-2/+4
| | | | | | | | | | | | | | | | | commit af4295c117b82a521b05d0daf39ce879d26e6cb1 upstream. Set traffic class within sl_tclass_flowlabel when create iboe AH. Without this the TOS value will be empty when running VLAN tagged traffic, because the TOS value is taken from the traffic class in the address handle attributes. Fixes: 9106c4106974 ('IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* powerpc/ibmebus: Fix device reference leaks in sysfs interfaceJohan Hovold2017-06-171-2/+6
| | | | | | | | | | | | | commit fe0f3168169f7c34c29b0cf0c489f126a7f29643 upstream. Make sure to drop any reference taken by bus_find_device() in the sysfs callbacks that are used to create and destroy devices based on device-tree entries. Fixes: 6bccf755ff53 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Willy Tarreau <w@1wt.eu>
* powerpc/ibmebus: Fix further device reference leaksJohan Hovold2017-06-171-2/+6
| | | | | | | | | | | | commit 815a7141c4d1b11610dccb7fcbb38633759824f2 upstream. Make sure to drop any reference taken by bus_find_device() when creating devices during init and driver registration. Fixes: 55347cc9962f ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Willy Tarreau <w@1wt.eu>
* NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success.NeilBrown2017-06-171-1/+2
| | | | | | | | | | | | | | | | | | | | | commit cfd278c280f997cf2fe4662e0acab0fe465f637b upstream. Various places assume that if nfs4_fl_prepare_ds() turns a non-NULL 'ds', then ds->ds_clp will also be non-NULL. This is not necessasrily true in the case when the process received a fatal signal while nfs4_pnfs_ds_connect is waiting in nfs4_wait_ds_connect(). In that case ->ds_clp may not be set, and the devid may not recently have been marked unavailable. So add a test for ds_clp == NULL and return NULL in that case. Fixes: c23266d532b4 ("NFS4.1 Fix data server connection race") Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Olga Kornievskaia <aglo@umich.edu> Acked-by: Adamson, Andy <William.Adamson@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' ↵Lukasz Odzioba2017-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | command-line option commit dd853fd216d1485ed3045ff772079cc8689a9a4a upstream. A negative number can be specified in the cmdline which will be used as setup_clear_cpu_cap() argument. With that we can clear/set some bit in memory predceeding boot_cpu_data/cpu_caps_cleared which may cause kernel to misbehave. This patch adds lower bound check to setup_disablecpuid(). Boris Petkov reproduced a crash: [ 1.234575] BUG: unable to handle kernel paging request at ffffffff858bd540 [ 1.236535] IP: memcpy_erms+0x6/0x10 Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andi.kleen@intel.com Cc: bp@alien8.de Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: slaoub@gmail.com Fixes: ac72e7888a61 ("x86: add generic clearcpuid=... option") Link: http://lkml.kernel.org/r/1482933340-11857-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: ch341: fix modem-control and B0 handlingJohan Hovold2017-06-171-9/+9
| | | | | | | | | | | | | | | commit 030ee7ae52a46a2be52ccc8242c4a330aba8d38e upstream. The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: ch341: fix resume after resetJohan Hovold2017-06-171-4/+13
| | | | | | | | | | | | | | commit ce5e292828117d1b71cbd3edf9e9137cf31acd30 upstream. Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96a9fb ("USB: serial: ch341: remove reset_resume callback") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: ch341: fix open and resume after B0Johan Hovold2017-06-171-2/+1
| | | | | | | | | | | | | commit a20047f36e2f6a1eea4f1fd261aaa55882369868 upstream. The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: ch341: fix control-message error handlingJohan Hovold2017-06-171-12/+22
| | | | | | | | | | | | | | | | commit 2d5a9c72d0c4ac73cf97f4b7814ed6c44b1e49ae upstream. A short control transfer would currently fail to be detected, something which could lead to stale buffer data being used as valid input. Check for short transfers, and make sure to log any transfer errors. Note that this also avoids leaking heap data to user space (TIOCMGET) and the remote device (break control). Fixes: 6ce76104781a ("USB: Driver for CH341 USB-serial adaptor") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: ch341: fix open error handlingJohan Hovold2017-06-171-5/+12
| | | | | | | | | | | commit f2950b78547ffb8475297ada6b92bc2d774d5461 upstream. Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: ch341: fix initial modem-control stateJohan Hovold2017-06-171-1/+0
| | | | | | | | | | | | commit 4e2da44691cffbfffb1535f478d19bc2dca3e62b upstream. DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* USB: serial: kl5kusb105: fix line-state error handlingJohan Hovold2017-06-171-4/+5
| | | | | | | | | | | | | | commit 146cc8a17a3b4996f6805ee5c080e7101277c410 upstream. The current implementation failed to detect short transfers when attempting to read the line state, and also, to make things worse, logged the content of the uninitialised heap transfer buffer. Fixes: abf492e7b3ae ("USB: kl5kusb105: fix DMA buffers on stack") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* mm/hugetlb.c: fix reservation race when freeing surplus pagesMike Kravetz2017-06-171-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e5bbc8a6c992901058bc09e2ce01d16c111ff047 upstream. return_unused_surplus_pages() decrements the global reservation count, and frees any unused surplus pages that were backing the reservation. Commit 7848a4bf51b3 ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()") added a call to cond_resched_lock in the loop freeing the pages. As a result, the hugetlb_lock could be dropped, and someone else could use the pages that will be freed in subsequent iterations of the loop. This could result in inconsistent global hugetlb page state, application api failures (such as mmap) failures or application crashes. When dropping the lock in return_unused_surplus_pages, make sure that the global reservation count (resv_huge_pages) remains sufficiently large to prevent someone else from claiming pages about to be freed. Analyzed by Paul Cassella. Fixes: 7848a4bf51b3 ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()") Link: http://lkml.kernel.org/r/1483991767-6879-1-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Paul Cassella <cassella@cray.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* Input: i8042 - add Pegatron touchpad to noloop tableMarcos Paulo de Souza2017-06-171-0/+6
| | | | | | | | | | | | | | | commit 41c567a5d7d1a986763e58c3394782813c3bcb03 upstream. Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able to recognize a Synaptics touchpad in the AUX port. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791 (Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B)) Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* powerpc: Fix build warning on 32-bit PPCLarry Finger2017-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8ae679c4bc2ea2d16d92620da8e3e9332fa4039f upstream. I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c14be ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* gro: Disable frag0 optimization on IPv6 ext headersHerbert Xu2017-06-172-2/+8
| | | | | | | | | | | | | | | | | | | | | | | commit 57ea52a865144aedbcd619ee0081155e658b6f7d upstream. The GRO fast path caches the frag0 address. This address becomes invalid if frag0 is modified by pskb_may_pull or its variants. So whenever that happens we must disable the frag0 optimization. This is usually done through the combination of gro_header_hard and gro_header_slow, however, the IPv6 extension header path did the pulling directly and would continue to use the GRO fast path incorrectly. This patch fixes it by disabling the fast path when we enter the IPv6 extension header path. Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address") Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
* gro: use min_t() in skb_gro_reset_offset()Eric Dumazet2017-06-171-2/+3
| | | | | | | | | | | | | commit 7cfd5fd5a9813f1430290d20c0fead9b4582a307 upstream. On 32bit arches, (skb->end - skb->data) is not 'unsigned int', so we shall use min_t() instead of min() to avoid a compiler error. Fixes: 1272ce87fa01 ("gro: Enter slow-path if there is no tailroom") Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
* gro: Enter slow-path if there is no tailroomHerbert Xu2017-06-171-1/+2
| | | | | | | | | | | | | | | | | | commit 1272ce87fa017ca4cf32920764d879656b7a005a upstream. The GRO path has a fast-path where we avoid calling pskb_may_pull and pskb_expand by directly accessing frag0. However, this should only be done if we have enough tailroom in the skb as otherwise we'll have to expand it later anyway. This patch adds the check by capping frag0_len with the skb tailroom. Fixes: cb18978cbf45 ("gro: Open-code final pskb_may_pull") Reported-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
* net: stmmac: Fix race between stmmac_drv_probe and stmmac_openFlorian Fainelli2017-06-171-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5701659004d68085182d2fd4199c79172165fa65 upstream. There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
* net, sched: fix soft lockup in tc_classifyDaniel Borkmann2017-06-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 628185cfddf1dfb701c4efe2cfd72cf5b09f5702 upstream. Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
* ser_gigaset: return -ENOMEM on error instead of successDan Carpenter2017-06-171-1/+3
| | | | | | | | | | | | commit 93a97c50cbf1c007caf12db5cc23e0d5b9c8473c upstream. If we can't allocate the resources in gigaset_initdriver() then we should return -ENOMEM instead of zero. Fixes: 2869b23e4b95 ("[PATCH] drivers/isdn/gigaset: new M101 driver (v2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
* powerpc/pci/rpadlpar: Fix device reference leaksJohan Hovold2017-06-171-1/+9
| | | | | | | | | | | | commit 99e5cde5eae78bef95bfe7c16ccda87fb070149b upstream. Make sure to drop any device reference taken by vio_find_node() when adding and removing virtual I/O slots. Fixes: 5eeb8c63a38f ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Willy Tarreau <w@1wt.eu>
* mmc: mmc_test: Uninitialized return valueDan Carpenter2017-06-171-1/+1
| | | | | | | | | | | commit 16652a936e96f5dae53c3fbd38a570497baadaa8 upstream. We never set "ret" to RESULT_OK. Fixes: 9f9c4180f88d ("mmc: mmc_test: add test for non-blocking transfers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* target/iscsi: Fix double free in lio_target_tiqn_addtpg()Dan Carpenter2017-06-171-1/+0
| | | | | | | | | | | | | | | | commit a91918cd3ea11f91c68e08e1e8ce1b560447a80e upstream. This iscsit_tpg_add_portal_group() function is only called from lio_target_tiqn_addtpg(). Both functions free the "tpg" pointer on error so it's a double free bug. The memory is allocated in the caller so it should be freed in the caller and not here. Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Disseldorp <ddiss@suse.de> [ bvanassche: Added "Fix" at start of patch title ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* scsi: mvsas: fix command_active typoArnd Bergmann2017-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit af15769ffab13d777e55fdef09d0762bf0c249c4 upstream. gcc-7 notices that the condition in mvs_94xx_command_active looks suspicious: drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_command_active': drivers/scsi/mvsas/mv_94xx.c:671:15: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context] This was introduced when the mv_printk() statement got added, and leads to the condition being ignored. This is probably harmless. Changing '&&' to '&' makes the code look reasonable, as we check the command bit before setting and printing it. Fixes: a4632aae8b66 ("[SCSI] mvsas: Add new macros and functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
* iommu/amd: Fix the left value check of cmd bufferHuang Rui2017-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit 432abf68a79332282329286d190e21fe3ac02a31 upstream. The generic command buffer entry is 128 bits (16 bytes), so the offset of tail and head pointer should be 16 bytes aligned and increased with 0x10 per command. When cmd buf is full, head = (tail + 0x10) % CMD_BUFFER_SIZE. So when left space of cmd buf should be able to store only two command, we should be issued one COMPLETE_WAIT additionally to wait all older commands completed. Then the left space should be increased after IOMMU fetching from cmd buf. So left check value should be left <= 0x20 (two commands). Signed-off-by: Huang Rui <ray.huang@amd.com> Fixes: ac0ea6e92b222 ('x86/amd-iommu: Improve handling of full command buffer') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Willy Tarreau <w@1wt.eu>
* clk: clk-wm831x: fix a logic errorPan Bian2017-06-171-1/+1
| | | | | | | | | | | | | | | commit 20979202ee6e4c68dab7bcf408787225a656d18e upstream. Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188561. Function wm831x_clkout_is_prepared() returns "true" when it fails to read CLOCK_CONTROL_1. "true" means the device is already prepared. So return "true" on the read failure seems improper. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Fixes: f05259a6ffa4 ("clk: wm831x: Add initial WM831x clock driver") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
* hwmon: (ds620) Fix overflows seen when writing temperature limitsGuenter Roeck2017-06-171-1/+1
| | | | | | | | | | | | | | | | | commit e36ce99ee0815d7919a7b589bfb66f3de50b6bc7 upstream. Module test reports: temp1_max: Suspected overflow: [160000 vs. 0] temp1_min: Suspected overflow: [160000 vs. 0] This is seen because the values passed when writing temperature limits are unbound. Reviewed-by: Jean Delvare <jdelvare@suse.de> Fixes: 6099469805c2 ("hwmon: Support for Dallas Semiconductor DS620") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
generated by cgit v1.2.3 (git 2.39.1) at 2026-03-21 01:54:40 +0000