xavi/android_kernel_m2note/drivers, branch mm-6.0

HID: core: prevent out-of-bound readings

2016-11-17T11:13:08+00:00

Plugging a Logitech DJ receiver with KASAN activated raises a bunch of out-of-bound readings. The fields are allocated up to MAX_USAGE, meaning that potentially, we do not have enough fields to fit the incoming values. Add checks and silence KASAN. Change-Id: I11d44957b450a3eda258c05f9e833c71a079e83c Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

BACKPORT: tty: Prevent ldisc drivers from re-using stale tty fields

2016-11-17T11:13:08+00:00

(cherry picked from commit dd42bf1197144ede075a9d4793123f7689e164bc) Line discipline drivers may mistakenly misuse ldisc-related fields when initializing. For example, a failure to initialize tty->receive_room in the N_GIGASET_M101 line discipline was recently found and fixed [1]. Now, the N_X25 line discipline has been discovered accessing the previous line discipline's already-freed private data [2]. Harden the ldisc interface against misuse by initializing revelant tty fields before instancing the new line discipline. [1] commit fd98e9419d8d622a4de91f76b306af6aa627aa9c Author: Tilman Schmidt Date: Tue Jul 14 00:37:13 2015 +0200 isdn/gigaset: reset tty->receive_room when attaching ser_gigaset [2] Report from Sasha Levin [ 634.336761] ================================================================== [ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0 [ 634.339558] Read of size 4 by task syzkaller_execu/8981 [ 634.340359] ============================================================================= [ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected ... [ 634.405018] Call Trace: [ 634.405277] dump_stack (lib/dump_stack.c:52) [ 634.405775] print_trailer (mm/slub.c:655) [ 634.406361] object_err (mm/slub.c:662) [ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236) [ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279) [ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1)) [ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447) [ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567) [ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879) [ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188) Cc: Tilman Schmidt Cc: Sasha Levin Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman Change-Id: Ibed6feadfb9706d478f93feec3b240aecfc64af3 Bug: 30951112

xc2028: avoid use after free

2016-11-17T11:13:06+00:00

If struct xc2028_config is passed without a firmware name, the following trouble may happen: [11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [11009.907491] ================================================================== [11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40 [11009.907992] Read of size 1 by task modprobe/28992 [11009.907994] ============================================================================= [11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected [11009.907999] ----------------------------------------------------------------------------- [11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992 [11009.908012] ___slab_alloc+0x581/0x5b0 [11009.908014] __slab_alloc+0x51/0x90 [11009.908017] __kmalloc+0x27b/0x350 [11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] [11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60 [11009.908029] usb_submit_urb+0xb0e/0x1200 [11009.908032] usb_serial_generic_write_start+0xb6/0x4c0 [11009.908035] usb_serial_generic_write+0x92/0xc0 [11009.908039] usb_console_write+0x38a/0x560 [11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0 [11009.908051] console_unlock+0x40d/0x900 [11009.908056] vprintk_emit+0x4b4/0x830 [11009.908061] vprintk_default+0x1f/0x30 [11009.908064] printk+0x99/0xb5 [11009.908067] kasan_report_error+0x10a/0x550 [11009.908070] __asan_report_load1_noabort+0x43/0x50 [11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992 [11009.908077] __slab_free+0x2ec/0x460 [11009.908080] kfree+0x266/0x280 [11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028] [11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908108] do_one_initcall+0x141/0x300 [11009.908111] do_init_module+0x1d0/0x5ad [11009.908114] load_module+0x6666/0x9ba0 [11009.908117] SyS_finit_module+0x108/0x130 [11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080 [11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001 [11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(...... [11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j.... [11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43 [11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80 [11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280 [11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4 [11009.908158] Call Trace: [11009.908162] [] dump_stack+0x4b/0x64 [11009.908165] [] print_trailer+0xf9/0x150 [11009.908168] [] object_err+0x34/0x40 [11009.908171] [] kasan_report_error+0x230/0x550 [11009.908175] [] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908179] [] ? kasan_unpoison_shadow+0x36/0x50 [11009.908182] [] __asan_report_load1_noabort+0x43/0x50 [11009.908185] [] ? __asan_register_globals+0x50/0xa0 [11009.908189] [] ? strcmp+0x96/0xb0 [11009.908192] [] strcmp+0x96/0xb0 [11009.908196] [] xc2028_set_config+0x15c/0x630 [tuner_xc2028] [11009.908200] [] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908203] [] ? memset+0x28/0x30 [11009.908206] [] ? xc2028_set_config+0x630/0x630 [tuner_xc2028] [11009.908211] [] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908215] [] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb] [11009.908219] [] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb] [11009.908222] [] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x] [11009.908226] [] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x] [11009.908230] [] ? ref_module.part.15+0x10/0x10 [11009.908233] [] ? module_assert_mutex_or_preempt+0x80/0x80 [11009.908238] [] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908242] [] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb] [11009.908245] [] ? string+0x14d/0x1f0 [11009.908249] [] ? symbol_string+0xff/0x1a0 [11009.908253] [] ? uuid_string+0x6f0/0x6f0 [11009.908257] [] ? __kernel_text_address+0x7e/0xa0 [11009.908260] [] ? print_context_stack+0x7f/0xf0 [11009.908264] [] ? __module_address+0xb6/0x360 [11009.908268] [] ? is_ftrace_trampoline+0x99/0xe0 [11009.908271] [] ? __kernel_text_address+0x7e/0xa0 [11009.908275] [] ? debug_check_no_locks_freed+0x290/0x290 [11009.908278] [] ? dump_trace+0x11b/0x300 [11009.908282] [] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908285] [] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908289] [] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908292] [] ? trace_hardirqs_on+0xd/0x10 [11009.908296] [] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908299] [] ? mutex_trylock+0x400/0x400 [11009.908302] [] ? do_one_initcall+0x131/0x300 [11009.908306] [] ? call_rcu_sched+0x17/0x20 [11009.908309] [] ? put_object+0x48/0x70 [11009.908314] [] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908317] [] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908320] [] ? 0xffffffffa0150000 [11009.908324] [] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908327] [] do_one_initcall+0x141/0x300 [11009.908330] [] ? try_to_run_init_process+0x40/0x40 [11009.908333] [] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908337] [] ? kasan_unpoison_shadow+0x36/0x50 [11009.908340] [] ? kasan_unpoison_shadow+0x36/0x50 [11009.908343] [] ? kasan_unpoison_shadow+0x36/0x50 [11009.908346] [] ? __asan_register_globals+0x87/0xa0 [11009.908350] [] do_init_module+0x1d0/0x5ad [11009.908353] [] load_module+0x6666/0x9ba0 [11009.908356] [] ? symbol_put_addr+0x50/0x50 [11009.908361] [] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb] [11009.908366] [] ? module_frob_arch_sections+0x20/0x20 [11009.908369] [] ? open_exec+0x50/0x50 [11009.908374] [] ? ns_capable+0x5b/0xd0 [11009.908377] [] SyS_finit_module+0x108/0x130 [11009.908379] [] ? SyS_init_module+0x1f0/0x1f0 [11009.908383] [] ? lockdep_sys_exit_thunk+0x12/0x14 [11009.908394] [] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908396] Memory state around the buggy address: [11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc [11009.908405] ^ [11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908411] ================================================================== In order to avoid it, let's set the cached value of the firmware name to NULL after freeing it. While here, return an error if the memory allocation fails. Issue: CYNGNOS-3304 Change-Id: I8681491173707c704a0746ab126884026b3462f8 Signed-off-by: Mauro Carvalho Chehab (cherry picked from commit 6905f89ec2db818b02f516b26aa2ffc5d1e2c5e2)

sg: Fix double-free when drives detach during SG_IO

2016-11-17T11:13:06+00:00

In sg_common_write(), we free the block request and return -ENODEV if the device is detached in the middle of the SG_IO ioctl(). Unfortunately, sg_finish_rem_req() also tries to free srp->rq, so we end up freeing rq->cmd in the already free rq object, and then free the object itself out from under the current user. This ends up corrupting random memory via the list_head on the rq object. The most common crash trace I saw is this: ------------[ cut here ]------------ kernel BUG at block/blk-core.c:1420! Call Trace: [] blk_put_request+0x5b/0x80 [] sg_finish_rem_req+0x6b/0x120 [sg] [] sg_common_write.isra.14+0x459/0x5a0 [sg] [] ? selinux_file_alloc_security+0x48/0x70 [] sg_new_write.isra.17+0x195/0x2d0 [sg] [] sg_ioctl+0x644/0xdb0 [sg] [] do_vfs_ioctl+0x90/0x520 [] ? file_has_perm+0x97/0xb0 [] SyS_ioctl+0x91/0xb0 [] tracesys+0xdd/0xe2 RIP [] __blk_put_request+0x154/0x1a0 The solution is straightforward: just set srp->rq to NULL in the failure branch so that sg_finish_rem_req() doesn't attempt to re-free it. Additionally, since sg_rq_end_io() will never be called on the object when this happens, we need to free memory backing ->cmd if it isn't embedded in the object itself. KASAN was extremely helpful in finding the root cause of this bug. Change-Id: I8c2389a4e2e1b5f753a47f8af60502a761b891b5 Signed-off-by: Calvin Owens Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen

FmRadio: fix it, by adding definition for COMPAT_FM_IOCTL_GET_AUDIO_INFO

2016-11-17T11:13:05+00:00

fixes ioctl fail

mediatek: aee: remove dependencies on deprecated android logger

2016-11-17T11:12:44+00:00

staging: Remove logger and alarm-dev from android Makefile

2016-11-17T11:12:25+00:00

My previous patches deleting logger and alarm-dev from staging missed the android Makefile. This patch cleans up the Makefile to remove the now non-existent files. Cc: Rom Lemarchand , Cc: Mark Salyzyn , Cc: Kees Cook , Cc: Android Kernel Team , Cc: Valentin Rothberg , Cc: Greg Hackmann , Cc: Elliott Hughes , Cc: Todd Poynor , Reported-by: Paul Bolle Signed-off-by: John Stultz Acked-by: Kees Cook Signed-off-by: Greg Kroah-Hartman Bug: 13505761 Change-Id: Id8c027ce51a663ee2e9ea2618612921db7cf7635

staging: Remove the Android alarm-dev driver

2016-11-17T11:12:24+00:00

The functionality provided by the Android alarm-dev driver should now be present in the timerfd interface (thanks to Greg Hackmann and Todd Poynor). As of Lollipop, AOSP can make use of the timerfd if alarm-dev is not present (though a fixup for setting the rtc time if rtc0 isn't the backing for _ALARM clockids has been applied post-Lollipop). Thus, we should be able to remove alarm-dev from staging. Cc: Greg Hackmann Cc: Elliott Hughes Cc: Todd Poynor Cc: Android Kernel Team Signed-off-by: John Stultz Acked-by: Mark Salyzyn Signed-off-by: Greg Kroah-Hartman Change-Id: Ia905d4b809cc1614ddde01ccb791fc56ac292fa7

staging: Remove the Android logger driver

2016-11-17T11:12:24+00:00

With the relase of Lollipop, Android no longer requires the logger driver. There are three patches which the android dev's still need before they drop logger on all their devices: [PATCH v4 1/5] pstores: use scnprintf [PATCH v2 2/5] pstore: remove superfluous memory size check [PATCH 3/5] pstore: handle zero-sized prz in series [PATCH v4 4/5] pstore: add pmsg [PATCH 5/5] pstore: selinux: add security in-core xattr support for pstore and debugfs But these seem to have been acked and are hopefully queued for upstream. So this patch removes the logger driver from staging. Cc: Rom Lemarchand , Cc: Mark Salyzyn Cc: Kees Cook Cc: Android Kernel Team Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman Bug: 13505761 Change-Id: I21b6897f01871851e05b6eb53c7c08a1cb597e3e (cherry picked from commit e26c1fa7e7ab4a06242d9fce5368b05e412812e1)

android: drivers: workaround debugfs race in binder

2016-11-17T11:12:24+00:00

If a /d/binder/proc/[pid] entry is kept open after linux has torn down the associated process, binder_proc_show can deference an invalid binder_proc that has been stashed in the debugfs inode. Validate that the binder_proc ptr passed into binder_proc_show has not been freed by looking for it within the global process list whilst the global lock is held. If the ptr is not valid, print nothing. Bug 19587483 Change-Id: Ice878c171db51ef9a4879c2f9299a2deb873d255 Signed-off-by: Riley Andrews